Flowmaster Fits 1955-1957 Chevrolet 2 Dr/4 Dr Sedan & Coupe. Does Not fit Wagons 15816
Specifications:
| Automotive Item Grade | High Performance |
| Automotive Item Grade | High Performance |
| Brand | Flowmaster |
| Brand | Flowmaster |
| California Proposition 65 Required | No |
| California Proposition 65 Required | No |
| Category | Exhaust |
| Category | Exhaust |
| 1882 | No |
| 1882 | No |
| 17 | Gray |
| 17 | Gray |
| Emission Code | 5 |
| Emission Code | 5 |
| Exit Position | Dual Rear Exit |
| Exit Position | Dual Rear Exit |
| 9870 | Dual Rear Exit |
| 9870 | Dual Rear Exit |
| 200 | Aluminized |
| 200 | Aluminized |
| Fitment | Direct Fit |
| Fitment | Direct Fit |
| 1880 | No |
| 1880 | No |
| 3390 | Performance |
| 3390 | Performance |
| 9957 | Slip-Fit |
| 9957 | Slip-Fit |
| Inlet Diameter | 2.50 |
| Inlet Diameter | 2.50 |
| 601 | 2.50 |
| 601 | 2.50 |
| 1171 | 2.63 |
| 1171 | 2.63 |
| 9871 | 2.50 |
| 9871 | 2.50 |
| 10 | Aluminized Steel |
| 10 | Aluminized Steel |
| 9958 | Slip-Fit |
| 9958 | Slip-Fit |
| Outlet Diameter | 2.50 |
| Outlet Diameter | 2.50 |
| 622 | 2.50 |
| 622 | 2.50 |
| 1172 | 2.63 |
| 1172 | 2.63 |
| Overall Length | 65.25 |
| Overall Length | 65.25 |
| part type | Exhaust Tail Pipe |
| part type | Exhaust Tail Pipe |
| 9790 | Mandrel |
| 9790 | Mandrel |
| Product Type | Exhaust Accessories |
| Product Type | Exhaust Accessories |
| Sub Category | Exhaust and Tail Pipes |
| Sub Category | Exhaust and Tail Pipes |
| System Type | Tailpipe Kit |
| System Type | Tailpipe Kit |
| 1883 | No |
| 1883 | No |
| Tubing Diameter | 2.50 |
| Tubing Diameter | 2.50 |
| Universal Or Specific Fit | Specific Fit |
| Universal Or Specific Fit | Specific Fit |
| 9784 | 0 |
| 9784 | 0 |
| 2875 | No |
| 2875 | No |
| Description_ABR | PIPE 55-57 C |
| Description_SHO | PIPE 55-57 CHEV T-S |
| Description_INV | 55-57 CHEV T-PIPES 1PR. |
| Description_ASC | Fits 1955-1957 Chevrolet 2 Dr/4 Dr Sedan & Coupe. Does Not fit Wagons. Designed for Offset Inlet/Center Outlet mufflers. |
| Description_DES | Flowmaster Pre-bent Tailpipes |
| Description_EXT | Fits 1955-1957 Chevrolet 2 Dr/4 Dr Sedan & Coupe. Does Not fit Wagons |
| Description_MKT | These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Center Outlet mufflers such as part# 942546 (Super 44 Series) or 53056 (Super 50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Some fitment may be necessary. Does Not include installation hardware or exhaust tips. |
| Description_FAB | Designed for Off-set Inlet/Center Outlet Mufflers |
| Description_FAB | Exits Straight-out under the Rear Bumper |
| Description_FAB | Mandrel-bent for Maximum Performance |
| Description_FAB | High Clearance around Rear Differential |
| Description_FAB | 16 Gauge Aluminzed Steel Tubing |
| Description_FAB | Does Not Include Hardware |
| Description_FAB | 3-year Limited Warranty |
| Description_ABR | PIPE 55-57 C |
| Description_SHO | PIPE 55-57 CHEV T-S |
| Description_INV | 55-57 CHEV T-PIPES 1PR. |
| Description_ASC | Fits 1955-1957 Chevrolet 2 Dr/4 Dr Sedan & Coupe. Does Not fit Wagons. Designed for Offset Inlet/Center Outlet mufflers. |
| Description_DES | Flowmaster Pre-bent Tailpipes |
| Description_EXT | Fits 1955-1957 Chevrolet 2 Dr/4 Dr Sedan & Coupe. Does Not fit Wagons |
| Description_MKT | These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Center Outlet mufflers such as part# 942546 (Super 44 Series) or 53056 (Super 50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Some fitment may be necessary. Does Not include installation hardware or exhaust tips. |
| Description_FAB | Designed for Off-set Inlet/Center Outlet Mufflers |
| Description_FAB | Exits Straight-out under the Rear Bumper |
| Description_FAB | Mandrel-bent for Maximum Performance |
| Description_FAB | High Clearance around Rear Differential |
| Description_FAB | 16 Gauge Aluminzed Steel Tubing |
| Description_FAB | Does Not Include Hardware |
| Description_FAB | 3-year Limited Warranty |
This Part Fits:
| Year | Make | Model | Submodel | Notes |
|---|---|---|---|---|
| 1955 | Chevrolet | Bel Air | Base | |
| 1956 | Chevrolet | Bel Air | Base | |
| 1957 | Chevrolet | Bel Air | Base | |
| 1957 | Chevrolet | Bel Air | Base | |
| 1955 | Chevrolet | Bel Air | Beauville | |
| 1956 | Chevrolet | Bel Air | Beauville | |
| 1955 | Chevrolet | Bel Air | Nomad | |
| 1956 | Chevrolet | Bel Air | Nomad | |
| 1957 | Chevrolet | Bel Air | Nomad | |
| 1957 | Chevrolet | Bel Air | Nomad | |
| 1955 | Chevrolet | One-Fifty Series | Base | |
| 1956 | Chevrolet | One-Fifty Series | Base | |
| 1957 | Chevrolet | One-Fifty Series | Base | |
| 1957 | Chevrolet | One-Fifty Series | Base | |
| 1955 | Chevrolet | Two-Ten Series | Base | |
| 1956 | Chevrolet | Two-Ten Series | Base | |
| 1957 | Chevrolet | Two-Ten Series | Base | |
| 1957 | Chevrolet | Two-Ten Series | Base | |
| 1955 | Chevrolet | Two-Ten Series | Del Ray | |
| 1956 | Chevrolet | Two-Ten Series | Del Ray | |
| 1957 | Chevrolet | Two-Ten Series | Del Ray | |
| 1957 | Chevrolet | Two-Ten Series | Del Ray |