Edelbrock Engine Cylinder Head 61179
Specifications:
| Exhaust Port Location | Standard |
| Seat Angle | Exhaust 45 deg/Intake 45 |
| Quantity | Sold Individually |
| Seat Material | Ductile Iron |
| Retainer Included | Yes |
| Valve Included | Yes |
| Guide Plates Included | No |
| CNC Ported | Yes |
| Camshaft Type | Flat Tappet |
| Intake Runner Volume | 245 |
| Exhaust Valve Diameter | 1.94 |
| Valve Springs Included | Yes |
| Series | Victor Jr. |
| Material | Aluminum |
| Horsepower | 550-800 |
| Grade Type | Performance |
| Head Casting Number | N/A |
| Guide Material | Manganese Bronze |
| Valve Stem Diameter | 0.3125 |
| Deck Thickness | 0.625 |
| Valve Spring Diameter | 1.54 |
| Valve Angle | Exhaust (Tipped) 1.5-21.5 deg/Intake Stock |
| Family | Victor Jr. |
| Combustion Chamber Volume | 170 |
| RGL | WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Push Rod Diameter | (Suggested) 0.3125 in Or 0.375 |
| Intake Valve Diameter | 2.320 |
| Valve Spring Maximum Lift | 0.600 |
| EGR Port | No |
| Exhaust Runner Volume | 105 |
| Construction Type | Complete |
| Description_ABR | Cyl. Head |
| Description_INV | Edelbrock HEMI GEN II Cylinder Head |
| Description_LAB | Victor Jr Gen II HEMI Chrysler Cylinder Head Hydraulic Flat Tappet Cam |
| Description_ASM | Chrysler:Big-Block Gen II HEMI:426 (7.0L) |
| Description_EXT | Our new Edelbrock #61179 Victor Jr. Cylinder Heads are designed for high output 650+ hp Chrysler 426-572 HEMI engines. Fully CNC'd combustion chambers and CNC blended seats for optimal air flow performance. |
| Description_MKT | Our new Edelbrock #61179 Victor Jr. cylinder head is designed for high output 650+ hp Chrysler 426-572 HEMI engines. They feature fully CNC'd combustion chambers and CNC blended seats for optimal air flow performance. This cylinder head also feature a revised exhaust valve angle to accommodate larger intake valves. They also feature brass tubes installed in exhaust pushrod holes to allow maximum clearance with minimal port intrusion. |
| Description_TRA | EQUIPPED WITH SPRINGS FOR USE IN HYDRAULIC FLAT TAPPET CAMSHAFT APPLICATIONS |
| Description_TRA | Victor Jr. CNC cylinder heads #61179 are complete and ready to run right out of the box. |
| Description_TRA | Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat. |
| Description_DEF | Engine Cylinder Head |