Design Engineering One 2 inch by 30 foot roll of Reflect-A-Gold. 10397
Specifications:
| Thickness | .0625 |
| Width | 2 |
| Length | 30 |
| Maximum Temperature Rating | 800 |
| Color | Gold |
| Material | Gold Polyimide over Glass Fiber Scrim |
| Resistant To | Heat |
| Application Method | Stick |
| Fiber Reinforced | Yes |
| Adhesive Heat Resistance | 325°F |
| Radiant Heat Resistance | 850°F |
| Backing | Adhesive |
| Title | DEI 10397 Reflect-A-GOLD Heat Reflective Tape 2" x 30' 010397 |
| Includes | One 2 inch by 30 foot roll of Reflect-A-Gold. |
| Prop 65 - Short label | WARNING: Cancer and Reproductive Harm - www.p65warnings.cs.gov |
| Prop 65 - Long label | WARNING: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov |
| Prop 65 Yes/No | Yes |
| Description_ASC | Reflect-A-GOLD(TM) solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is a metalized polyimide laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and won't lift off. Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms & anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325F 0.0065 in. thick Easy to apply, won't lift off Tape is available in 1-1DO NOT apply directly to exhaust components. |
| Description_DEF | Heat Reflective Tape |
| Description_DES | Reflect-A-GOLD 2in x 30ft |
| Description_EXT | One 2 inch by 30 foot roll of Reflect-A-Gold. |
| Description_FAB | For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms |
| Description_FAB | Handles Continuous Temps Up To 800 Degrees F |
| Description_FAB | Resists UV Degradation For Long-Term Performance |
| Description_FAB | Adhesive Protected By Release Liner Rated Up To 325 Degrees F |
| Description_FAB | Virtually NO Clearance Needed |
| Description_FAB | Light Weight And Flexible-Trim To Size |
| Description_FAB | 0.0065 in. Thick |
| Description_FAB | Easy To Apply- Wont Lift Off |
| Description_INV | Reflect-A-GOLD Heat Reflective Tape 2x30 |
| Description_KSW | 010397 |
| Description_KSW | 10397 |
| Description_KSW | gold |
| Description_KSW | heat |
| Description_KSW | tape |
| Description_KSW | adhesive |
| Description_KSW | polyimide |
| Description_LAB | Reflect-A-GOLD(TM) Heat Reflective Tape - 2" x 30' |
| Description_MKT | Reflect-A-GOLD(TM) solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is a metalized polyimide laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and won't lift off. Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms & anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325F 0.0065 in. thick Easy to apply, won't lift off Tape is available in 1-1DO NOT apply directly to exhaust components. |
| Description_SHO | Heat Reflective Tape |