Design Engineering One 24 inch by 24 inch sheet of Reflect-A-Gold. 10393
Specifications:
| Thickness | .0625 |
| Length | 24 |
| Width | 24 |
| Maximum Temperature Rating | 800 |
| Color | Gold |
| Material | Gold Polyimide over Glass Fiber Scrim |
| Resistant To | Heat |
| Application Method | Stick |
| Fiber Reinforced | Yes |
| Adhesive Heat Resistance | 325°F |
| Radiant Heat Resistance | 850°F |
| Backing | Adhesive |
| Title | DEI 10393 Reflect-A-GOLD Heat Reflective Sheet 24" x 24" 010393 |
| Includes | One 24 inch by 24 inch sheet of Reflect-A-Gold. |
| Prop 65 - Short label | WARNING: Cancer and Reproductive Harm - www.p65warnings.cs.gov |
| Prop 65 - Long label | WARNING: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov |
| Prop 65 Yes/No | Yes |
| Description_ASC | Reflect-A-GOLD(TM) solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is an adhesive heat shield made from a metalized polyimide laminated to a light weight glass fiber cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. Our lightweight, adhesive thermal shielding is easily applied and won't lift off. It's minimal clearance and ease of use makes Reflect-A-GOLD a highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms, and anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325F 0.0065 in. thick Easy to apply, won't lift off DO NOT apply directly to exhaust components. |
| Description_DEF | Heat Reflective Tape |
| Description_DES | Reflect-A-GOLD 24in x 24in |
| Description_EXT | One 24 inch by 24 inch sheet of Reflect-A-Gold. |
| Description_FAB | For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms |
| Description_FAB | Handles Continuous Temps Up To 800 Degrees F |
| Description_FAB | Resists UV Degradation For Long-Term Performance |
| Description_FAB | Adhesive Protected By Release Liner Rated Up To 325 Degrees F |
| Description_FAB | Virtually NO Clearance Needed |
| Description_FAB | Light Weight And Flexible-Trim To Size |
| Description_FAB | 0.0065 in. Thick |
| Description_FAB | Easy To Apply- Wont Lift Off |
| Description_INV | Reflect-A-GOLD Sheet 24x24 |
| Description_KSW | 10393 |
| Description_KSW | 13700 |
| Description_KSW | 13775 |
| Description_KSW | 13900 |
| Description_KSW | polyimide |
| Description_KSW | 010393 |
| Description_KSW | gold |
| Description_KSW | heat |
| Description_KSW | shield |
| Description_KSW | tape |
| Description_KSW | sheet |
| Description_KSW | 010393 |
| Description_KSW | sheets |
| Description_KSW | adhesive |
| Description_KSW | 24k |
| Description_KSW | reflective |
| Description_KSW | reflect-a-gold |
| Description_KSW | 010393 |
| Description_KSW | gold heat shield |
| Description_KSW | gold heat tape |
| Description_KSW | gold heat tape sheets |
| Description_KSW | heat tape sheets |
| Description_KSW | adhesive heat shield |
| Description_KSW | 24k |
| Description_LAB | Reflect-A-GOLD(TM) Heat Reflective Sheet - 24" x 24" |
| Description_MKT | Reflect-A-GOLD(TM) solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is an adhesive heat shield made from a metalized polyimide laminated to a light weight glass fiber cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. Our lightweight, adhesive thermal shielding is easily applied and won't lift off. It's minimal clearance and ease of use makes Reflect-A-GOLD a highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms, and anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325F 0.0065 in. thick Easy to apply, won't lift off DO NOT apply directly to exhaust components. |
| Description_SHO | Heat Reflective Tape |