LS3 and LS7 cylinder heads. The COMP Cams Bushed Shaft Rocker System improves valve train stability and durability by securing all eight rocker arms onto a single rocker shaft. Thin tri-layer rocker arm bushings reduce rocker arm deflection and eliminate the high Hertz loading that can occur in needle bearing equipped rockers. Reduced rocker deflection increases valve train stiffness
COMP Cams Engine Rocker Arm and Shaft Assembly 1981-16
Specifications:
| Rocker Arm Series | Max-Lift BSR Shaft Rocker Systems |
| Engine Family | LS1, LS2, LS6 / Cathedral Port LS Cylinder Heads |
| Clears Factory Valve Cover? | Yes |
| Height | Stock |
| Rocker Arm Ratio | 1.7 |
| Rocker Arm Type | Shaft |
| Rocker Arm Material | Steel |
| Machine Work Required? | No |
| Maximum Valve Spring Open Pressure | 550 |
| Includes Bolts/Hardware? | Yes |
| Rocker Stud Diameter | 10 |
| Bolt/Stud Size | 10 |
| Intake Offset | No |
| Exhaust Offset | No |
| Rocker Arm Weight | 88 |
| Full Shaft Assembly with Rockers Per Head Weight | 3.07 |
| Title | Max-Lift BSR Shaft Rocker System for GM LS1, LS2, LS6 |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov |
| Amazon ASIN | B07MRBRT7X |
| C.A.R.B. Exempt for Racing and Off-Road Only Vehicles? | Yes, but must be a race/competition only vehicle. |
| C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967? | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965? | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967? | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for On-Road Vehicles? | No |
| C.A.R.B. Exemption Reason | N/A |
| C.A.R.B. E.O. Number | N/A |
| Description_MKT | ensuring that your LS is more efficient and durable under high loads. COMP Cams engineers worked to ensure long-term valve train durability by perfecting rocker to valve stem geometry and provisioning for supplementary pressurized oiling via threaded ends on the rocker shafts. Additionally |
| Description_MKT | each rocker shaft is Plasma Nitrided |
| Description_MKT | further increasing the system’s durability even when used with aggressive solid roller valve trains. The COMP Cams Bushed Shaft Rocker System for GM LS delivers high-level valve train stability |
| Description_MKT | precise fitment |
| Description_MKT | truer valve train geometry and increased load-bearing capacity in a package that is ready to bolt in that requires no machine work. |
| Description_SHO | LS1ShaftRockers |
| Description_INV | LS1/2/6 Shaft Rockers |
| Description_ASC | See 1982-16 for LS3/L92. |
| Description_ASC | See 1983-16 for LS7. |
| Description_KSW | GM |
| Description_KSW | 4.8 |
| Description_KSW | 5.3 |
| Description_KSW | 5.7 |
| Description_KSW | 6.0 |
| Description_KSW | 6.2 |
| Description_KSW | 7.0 |
| Description_KSW | LS1 |
| Description_KSW | LS2 |
| Description_KSW | LS3 |
| Description_KSW | LS4 |
| Description_KSW | LS6 |
| Description_KSW | LS7 |
| Description_KSW | LSA |
| Description_KSW | LS9 |
| Description_KSW | Camaro |
| Description_KSW | Silverado |
| Description_KSW | LS Swap |
| Description_KSW | 383 |
| Description_KSW | 350 |
| Description_KSW | SBC |
| Description_KSW | Chevelle |
| Description_KSW | Yukon |
| Description_KSW | L92 |
| Description_DEF | Engine Rocker Arm and Shaft Assembly |
| Description_KSW | GM LS |
| Description_KSW | GEN III |
| Description_KSW | GEN 3 |
| Description_KSW | Corvette |
| Description_KSW | Trailblazer |
| Description_KSW | GMC |
| Description_KSW | 325 |
| Description_KSW | LM7 |
| Description_KSW | BTR |
| Description_KSW | Texas Speed |
| Description_DES | Max-Lift BSR Shaft Rocker System for GM LS1 |
| Description_DES | LS2 |
| Description_DES | LS6 |
| Description_EXT | This pair of Max-Lift BSR Shaft Mount Rockers for Cathedral Port LS engines is a bolt-in rocker upgrade that requires no machine work to install. Clears factory valve covers while greatly increasing valvetrain rigidity. |
| Description_MKT | COMP Cams is proud to announce another industry first: a bolt-in-ready Bushed Shaft Rocker System for GM LS engines. Thanks to innovative engineering |
| Description_KSW | GEN IV |
| Description_KSW | GEN 4 |
| Description_KSW | DOD |
| Description_KSW | AFM |
| Description_KSW | VVT |
| Description_MKT | this patent pending Bushed Shaft Rocker System increases valve train stability and durability while decreasing deflection and providing bolt-in convenience for LS1 |
| Description_MKT | LS3 and LS7 cylinder heads. The COMP Cams Bushed Shaft Rocker System improves valve train stability and durability by securing all eight rocker arms onto a single rocker shaft. Thin tri-layer rocker arm bushings reduce rocker arm deflection and eliminate the high Hertz loading that can occur in needle bearing equipped rockers. Reduced rocker deflection increases valve train stiffness |