600295 is a Streetlite flywheel from ACT's XACT lineup, built to be considerably lighter than the factory flywheel while remaining the most durable option in ACT's flywheel range. Weight is distributed to maximize strength, lower rotating inertia, and hold up to heat, delivering noticeably improved throttle response and acceleration with only OE-to-mild gear rattle. The forged, CNC-machined, and dynamically balanced construction is heat-treated for toughness and uses an induction-hardened ring gear, making it a good fit for street or race use, and like all XACT flywheels it can be resurfaced rather than replaced at service time.
WarrantySpecifications:
- Material: chromoly steel, forged and CNC-machined
- Weight: 11.4 lbs
- Friction surface diameter: 8.5 in / 215 mm
- Ring gear tooth count: 119
- SFI Rating: SFI 1.1
- Part Number: 600295
Vehicle Applications:
- 2002 Acura RSX Base
- 2002 Acura RSX Type-S
- 2003 Acura RSX Base
- 2003 Acura RSX Type-S
- 2004 Acura RSX Base
- 2004 Acura RSX Type-S
- 2005 Acura RSX Base
- 2005 Acura RSX Type-S
- 2006 Acura RSX Base
- 2006 Acura RSX Type-S
- 2004 Acura TSX Base
- 2005 Acura TSX Base
- 2006 Acura TSX Base
- 2007 Acura TSX Base
- 2008 Acura TSX Base
- 2002 Honda Civic Si
- 2003 Honda Civic Si
- 2004 Honda Civic Si
- 2005 Honda Civic Si
- 2006 Honda Civic Si
- 2007 Honda Civic Si
- 2008 Honda Civic MUGEN Si
- 2008 Honda Civic Si
- 2009 Honda Civic Si
- 2010 Honda Civic Si
- 2011 Honda Civic Si
This product can expose you to chemicals including carbon black, glass wool fibers, and silica (in clutch discs), chromium and nickel, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
FAQ
Can this flywheel be paired with an aftermarket clutch?
Yes. It is built to work with quality aftermarket clutches as well as OE-spec units, provided the clutch is matched to the correct step height, ring gear tooth count, and flywheel thickness. If it is part of an ACT clutch kit, the flywheel that kit specifies should be used.
What is a flywheel step, and why does it matter?
The step is the distance between the friction surface and the pressure plate mounting point, and it sets the correct working range for the pressure plate. Depending on the vehicle it can be an up-step, down-step, or flat design, so matching the correct step is critical to proper clutch function.
Can this flywheel be resurfaced?
Yes, it can be resurfaced the same way as a factory flywheel using a flywheel grinder, removing no more than about 0.040 in (1.02 mm) of material while preserving the correct step height.
Is this flywheel suitable for daily street driving?
Yes. The Streetlite is engineered for street and race use, with OE-to-mild gear rattle and a noticeable gain in throttle response and acceleration over the stock flywheel.