Wilwood 160-9240LS is an HP Modified one-piece Ford Hybrid hub and rotor for 1974-1980 Pinto spindles. It is a new iron casting, 10.15 in in diameter and 0.81 in thick, with 32 vanes and a plain face. It comes with bearing races and 5/8 in coarse thread wheel studs installed in a 5 x 5.00 in bolt pattern. The LS version uses longer 3.14 in wheel studs to simplify wheel spacing. It is intended for dirt and asphalt racing.
Notes:
- Bearing and hardware kit 370-9545 (inner and outer bearings, dust cap, spindle nut, washer, cotter pin and seal) is sold separately.
- LS denotes long 3.14 in wheel studs. Standard versions of this rotor use 2.14 in studs.
Specifications:
- Brand: Wilwood
- Part Number: 160-9240LS
- Rotor Type: HP Modified Hub & Rotor
- Diameter (in): 10.15
- Width (in): 0.81
- Mount Side: Non_Direct
- Material: Iron
- Vane Count: 32 V
- Type: ULHP
- Style: Plain Face
- Surface Finish: Plain
- Burnished: No
- Balanced: No
- Weight (lbs): 14.50
- Wheel Bolt Circle (in): 5 x 5.00
- Stud Diameter (in): 0.62
- Far Side Inside Diameter (in): 6.93
- Bearing Kit: 370-9545
FAQ
What does Wilwood 160-9240LS fit?
It is the Ford Hybrid version and fits 1974-1980 Pinto spindles.
What size is the 160-9240LS rotor?
It is 10.15 in in diameter and 0.81 in thick, with a 5 x 5.00 in wheel bolt circle.
What does LS mean on this part number?
LS rotors have longer 3.14 in wheel studs installed to simplify wheel spacing, compared with 2.14 in studs on the standard version.
Are bearings included?
Bearing races and wheel studs come installed, but the bearings are not included. Bearing and hardware kit 370-9545 is sold separately.

