Wilwood 140-14190 is a Classic Series Forged Superlite 4 front disc brake kit for 1948-1956 Ford trucks with the factory drum spindles. It uses four-piston, lug-mount Forged Superlite calipers in Type III anodize with one-piece 11.72 in by 1.19 in iron rotor and hub assemblies on a 5 x 5.50 in wheel bolt circle, and BP-10 compound pads on the 7420 pad plate. The intended applications install without modification, and the kit works with manual or power boost master cylinders. It comes with calipers, rotor and hub assemblies, brackets, hardware and a line kit.
Notes:
- Minimum wheel diameter is 15 in. Check the wheel clearance diagram in the installation instructions before ordering.
- Hub offset is -0.06 in per side compared with the OE hub.
Included:
- Calipers
- Rotor and hub assemblies
- Brackets
- Hardware
- Line kit (220-10509)
Specifications:
- Brand: Wilwood
- Part Number: 140-14190
- Kit Type: Classic Series Forged Superlite 4 Front Brake Kit
- Spindle Type: Factory Drum Spindle
- OE Hub Offset (in): -0.06
- Caliper: Forged Superlite
- Caliper Part Numbers (Left / Right): 120-11136
- Caliper Finish: Type III Anodize
- Piston Count: 4
- Piston Bores (in): 1.75, 1.75
- Piston Area (in²): 4.80
- Piston Type: Stainless
- Caliper Mount Type: Lug
- Brake Pad Plate: 7420
- Brake Pad Area (in²): 8.2
- Brake Pad Volume (in³): 4.9
- Pad Compound: BP-10
- Rotor Part Numbers (Left / Right): 160-14187
- Rotor Type: 1 PC Hub and Rotor
- Rotor Style: Plain Face
- Rotor Material: Iron
- Rotor Finish: Plain
- Rotor Diameter (in): 11.72
- Rotor Width (in): 1.19
- Vane Count: Vented
- Wheel Bolt Circle: 5 x 5.50
- Minimum Wheel Diameter (in): 15
- Front Line Kit: 220-10509
Vehicle Applications
- 1953 Ford F-100 (Base)
- 1954 Ford F-100 (Base)
- 1955 Ford F-100 (Base)
- 1956 Ford F-100 (Base)
- 1948 Ford F1 (Base)
- 1949 Ford F1 (Base)
- 1950 Ford F1 (Base)
- 1951 Ford F1 (Base)
- 1952 Ford F1 (Base)
FAQ
What vehicles does Wilwood 140-14190 fit?
It fits 1948-1952 Ford F1 and 1953-1956 Ford F-100 trucks with factory drum spindles. See Vehicle Applications for each year.
What calipers and rotors are in the kit?
The kit uses Forged Superlite four-piston lug mount calipers in Type III anodize with one-piece 11.72 in by 1.19 in vented iron hub and rotor assemblies in a plain face finish.
What wheel size does this kit need?
The minimum wheel diameter is 15 in. The kit may fit some 15 in wheels, so check the wheel clearance diagram before ordering.
Are brake lines included?
Yes. The kit comes complete with a line kit, part number 220-10509, along with the calipers, rotors, hubs, brackets and hardware.
Does it need a specific master cylinder?
No. The kit can be used with either a manual or a power boost master cylinder.

