Weiand Team G Intake Manifold 1957-1986 262ci-400ci, 1987-later with Aluminum Heads 7531WND
Specifications:
| Barrels | 4 |
| Basic Operating RPM Range | 3000-8200 |
| Brand | Weiand |
| Carburetor Flange | 4150 Square Bore |
| 10650 | 1 |
| 10652 | No |
| Category | Engine |
| 9063 | No |
| Color | Natural |
| 158 | Cast |
| 5337 | Rectangle |
| 6621 | 9.025 |
| 8095 | No |
| Emission Code | 3 |
| Engine | Chevrolet Small Block Gen I |
| Flange Style | 4150 Square Bore |
| 6643 | 5.63 |
| 906 | No |
| 10644 | No |
| Fuel System Type | Carb |
| 353 | No |
| 3390 | Performance |
| 10651 | No |
| Manifold Type | High Rise |
| 10 | Aluminum |
| 10648 | No |
| part type | Engine Intake Manifold |
| Plenum Finish | Cast |
| Product Type | Intake Manifold |
| 6645 | 6.56 |
| 10645 | No |
| 10649 | No |
| Single Or Dual Plane Type | Single |
| Sub Category | Cylinder Block Components |
| 10646 | 3.6 |
| Throttle Body Gasket Included | No |
| 10626 | No |
| Vacuum Ports | Yes |
| Warning | California Proposition 65 |
| Warranty | Manufacturer's Limited 90 Day Warranty |
| Barrels | 4 |
| Basic Operating RPM Range | 3000-8200 |
| Brand | Weiand |
| Carburetor Flange | 4150 Square Bore |
| 10650 | 1 |
| 10652 | No |
| Category | Engine |
| 9063 | No |
| Color | Natural |
| 158 | Cast |
| 5337 | Rectangle |
| 6621 | 9.025 |
| 8095 | No |
| Emission Code | 3 |
| Engine | Chevrolet Small Block Gen I |
| Flange Style | 4150 Square Bore |
| 6643 | 5.63 |
| 906 | No |
| 10644 | No |
| Fuel System Type | Carb |
| 353 | No |
| 3390 | Performance |
| 10651 | No |
| Manifold Type | High Rise |
| 10 | Aluminum |
| 10648 | No |
| part type | Engine Intake Manifold |
| Plenum Finish | Cast |
| Product Type | Intake Manifold |
| 6645 | 6.56 |
| 10645 | No |
| 10649 | No |
| Single Or Dual Plane Type | Single |
| Sub Category | Cylinder Block Components |
| 10646 | 3.6 |
| Throttle Body Gasket Included | No |
| 10626 | No |
| Vacuum Ports | Yes |
| Warning | California Proposition 65 |
| Warranty | Manufacturer's Limited 90 Day Warranty |
| Description_ABR | MANIFOLD SBC |
| Description_SHO | WEIAND TEAM G INTAKE |
| Description_INV | MANIFOLD, SBC EARLY SP SQ |
| Description_DES | Weiand Team G Intake - Chevy Small Block V8 |
| Description_EXT | Team G Intake Manifold 1957-1986 262ci-400ci, 1987-later with Aluminum Heads |
| Description_MKT | If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553. |
| Description_MKT | We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! |
| Description_MKT | This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. |
| Description_MKT | Weiand Nostalgia series intakes are proudly cast and machined in the USA. |
| Description_FAB | Power band: 3000-8200 RPM |
| Description_FAB | Weiand Nostalgia Series Intake Manifold |
| Description_FAB | Port Size: 2.10” height 1.24" width |
| Description_FAB | Square Carburetor Mounting Flange |
| Description_FAB | Single Plane with Isolated Plenum |
| Description_FAB | Height: Front 5.63", Rear 6.56" |
| Description_FAB | Isolated Water cross-over |
| Description_FAB | Plenum raised 2.0" compared to 7530 |
| Description_ABR | MANIFOLD SBC |
| Description_SHO | WEIAND TEAM G INTAKE |
| Description_INV | MANIFOLD, SBC EARLY SP SQ |
| Description_DES | Weiand Team G Intake - Chevy Small Block V8 |
| Description_EXT | Team G Intake Manifold 1957-1986 262ci-400ci, 1987-later with Aluminum Heads |
| Description_MKT | If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553. |
| Description_MKT | We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! |
| Description_MKT | This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. |
| Description_MKT | Weiand Nostalgia series intakes are proudly cast and machined in the USA. |
| Description_FAB | Power band: 3000-8200 RPM |
| Description_FAB | Weiand Nostalgia Series Intake Manifold |
| Description_FAB | Port Size: 2.10” height 1.24" width |
| Description_FAB | Square Carburetor Mounting Flange |
| Description_FAB | Single Plane with Isolated Plenum |
| Description_FAB | Height: Front 5.63", Rear 6.56" |
| Description_FAB | Isolated Water cross-over |
| Description_FAB | Plenum raised 2.0" compared to 7530 |