UMI Performance's adjustable upper A-arm mount is a direct bolt-in replacement for the original GM mount with several improvements. The factory GM mount used a bowl shaped plate that held water and led to rust, while the UMI fabricated mount lets water drain out from the strut bolt, which can extend the life of the front shocks. Several upper A-arm adjustment holes allow fine tuning of the front suspension, letting the driver raise or lower the A-arm mounting point 3/8 of an inch from the factory center position to set front roll center height. The fabricated design stays strong without adding weight. This part is made in the USA.
Specifications:
- Fabricated adjustable upper A-arm mount, factory strut style
- Direct bolt-in replacement for the GM mount
- Open design drains water to reduce rust and extend shock life
- Multiple adjustment holes for roll center tuning, 3/8 inch up or down
- Made in the USA
- Part number: 2336
Vehicle Applications:
- 1993 Chevrolet Camaro
- 1994 Chevrolet Camaro
- 1995 Chevrolet Camaro
- 1996 Chevrolet Camaro
- 1997 Chevrolet Camaro
- 1998 Chevrolet Camaro
- 1999 Chevrolet Camaro
- 2000 Chevrolet Camaro
- 2001 Chevrolet Camaro
- 2002 Chevrolet Camaro
- 1993 Pontiac Firebird
- 1994 Pontiac Firebird
- 1995 Pontiac Firebird
- 1996 Pontiac Firebird
- 1997 Pontiac Firebird
- 1998 Pontiac Firebird
- 1999 Pontiac Firebird
- 2000 Pontiac Firebird
- 2001 Pontiac Firebird
- 2002 Pontiac Firebird
FAQ
What vehicles do the UMI 2336 A-arm mounts fit?
They fit 1993-2002 Chevrolet Camaro and Pontiac Firebird models.
How are these different from the factory GM mount?
The factory mount used a bowl shaped plate that trapped water and caused rust. The UMI fabricated mount drains water from the strut bolt area, which can extend front shock life, and adds adjustment holes the factory mount does not have.
How much adjustment do these mounts offer?
Adjustment holes let the driver raise or lower the A-arm mounting point 3/8 of an inch from the factory center position to tune front roll center height.
Do these mounts require coilovers?
No, the #2336 factory style mount is used with factory or stock style strut setups.
