The Tick Performance Deck Anchor system is a set of six CNC machined billet anchors for generation 1 and generation 2 small block Chevrolet engines. Each anchor attaches to a modified 1/2" NPT plug installed in the deck surface, so block filler poured into the water jacket flows around the anchor and ties the deck to the fill.
At very high power levels, SBC blocks commonly crack from a head fastener hole across to a cylinder bore, mainly at the three middle studs in the middle row. Block filler alone supports the cylinder walls but does little to stop the deck from pulling upward if the head tries to lift. The anchors are meant to hold the deck surface down against the filler under extreme cylinder pressure.
Installation requires threading the block, which can be done by hand. The anchors are most effective with a full fill, so the system is not intended for street engines that depend on a cooling system.
Specifications
- Part number: TPDA2000
- Quantity: set of 6 deck anchors
- Construction: CNC machined billet
- Mounting: anchors attach to modified 1/2" NPT plugs
- Installation: requires threading of the block, which can be done by hand
- Block filler: required, full fill needed for best effect (filler not specified)
- Use: not for street engines that rely on a cooling system
- Engines: generation 1 and generation 2 small block Chevrolet (SBC / LT)
Engine Applications
- Generation 1 small block Chevrolet (SBC)
- Generation 2 small block Chevrolet (LT)
FAQ
Which engines do the Tick Performance Deck Anchors fit?
The Tick Performance Deck Anchors TPDA2000 are made for generation 1 and generation 2 small block Chevrolet engines.
How many anchors are in the set?
The TPDA2000 deck anchor system is a set of six CNC machined anchors.
Does the block need machining to install the deck anchors?
The TPDA2000 deck anchors require the block to be threaded, and that threading can be done by hand.
Can the deck anchors be used on a street engine?
The TPDA2000 deck anchors need a fully filled block to be most effective, so they are not for street engines that rely on a cooling system.
What problem do the deck anchors address?
The TPDA2000 deck anchors tie the deck surface into the block filler to keep the deck from pulling or flexing upward under extreme cylinder pressure.

