The Tick Performance Adjustable Torque Boxes are a weld-in pair of 4130 chromoly boxes that make the front (chassis side) mounting point of the rear lower control arm adjustable on 1993 to 2002 Camaro and Firebird models. Each box has the factory bolt location plus two holes above it and two below it, so the control arm angle can be set at any ride height.
Raising the front mount has the same effect on control arm angle as lowering the mount on the rear housing, without dropping the rear bolt into the limited space beside the tire. The top hole adds 4 degrees of bar angle compared with the middle, stock location, which raises the instant center and increases anti-squat.
The boxes arrive pre-welded and the mounting bolt threads into the box itself, so the inner wall of the stock mounting location does not have to be cut. The spacers normally placed on each side of an aftermarket control arm heim joint are built into the box, which reduces stress on the mounting bolt. Professional installation is recommended because the boxes must be welded into the chassis.
Specifications
- Part number: TPFBTB
- Quantity: one pair
- Material: 4130 chromoly
- Construction: pre-welded, weld-in installation
- Mounting positions: factory bolt location plus two holes above and two holes below
- Bar angle change: top hole adds 4 degrees compared with the middle (stock) location
- Mounting bolt: threads into the box, no cutting of the inner wall of the stock mounting location
- Includes: Nord-Lock lock washers
- Cutting required: very minimal on 1993 to 2002 cars, slightly more on 1982 to 1992 cars
- Control arm requirement: aftermarket arm with a heim joint, spacers are built into the box
- Does not fit: stock control arms, or boxed or tubular fabricated arms that use OEM width polyurethane bushings
- Heim joint size referenced for the 1/2" bolt: 3/4" thread with 1/2" hole
- Installation: professional installation recommended
Vehicle Applications
- 1993 Chevrolet Camaro
- 1993 Pontiac Firebird
- 1994 Chevrolet Camaro
- 1994 Pontiac Firebird
- 1995 Chevrolet Camaro
- 1995 Pontiac Firebird
- 1996 Chevrolet Camaro
- 1996 Pontiac Firebird
- 1997 Chevrolet Camaro
- 1997 Pontiac Firebird
- 1998 Chevrolet Camaro
- 1998 Pontiac Firebird
- 1999 Chevrolet Camaro
- 1999 Pontiac Firebird
- 2000 Chevrolet Camaro
- 2000 Pontiac Firebird
- 2001 Chevrolet Camaro
- 2001 Pontiac Firebird
- 2002 Chevrolet Camaro
- 2002 Pontiac Firebird
With slightly more cutting and prep work, these torque boxes also work on 1982 to 1992 Camaro and Firebird models, where the torque box location is the same but the shape is not identical.
FAQ
What vehicles do the Tick Performance Adjustable Torque Boxes fit?
The Tick Performance Adjustable Torque Boxes (TPFBTB) are designed to best fit 1993 to 2002 Camaro and Firebird models, and they work on 1982 to 1992 Camaro and Firebird models with slightly more cutting.
Will the TPFBTB torque boxes work with stock control arms?
No, the TPFBTB torque boxes do not work with stock control arms or with boxed or tubular fabricated arms that use OEM width polyurethane bushings.
How much adjustment do the Tick Performance Adjustable Torque Boxes provide?
Each Tick Performance Adjustable Torque Box has two holes above and two holes below the factory bolt location, and the top hole increases bar angle by 4 degrees compared with the middle, stock location.
What are the TPFBTB torque boxes made of?
The TPFBTB torque boxes are made from 4130 chromoly and come pre-welded for weld-in installation.
Do the Tick Performance Adjustable Torque Boxes bolt in?
No, the Tick Performance Adjustable Torque Boxes are a weld-in component that needs very minimal cutting, and professional installation is recommended.

