SPC Performance adjustable upper control arms are designed, engineered, and assembled in Colorado to restore correct alignment angles on lifted and leveled trucks and SUVs. Built-in positive caster counters the wandering and poor handling that come from added ride height, while the adjustment range lets the tire be centered in the wheel well for maximum clearance with oversized tires. Maintenance-free ball joints provide 80 degrees of articulation, and xAxis sealed flex joints in bonded rubber bushings keep suspension travel long and reduce noise, vibration, and harshness. If replacement lower adjustment cams are needed, see part 25450.
- Type: Adjustable upper control arms
- Position: Front upper
- Adjustment range: camber plus or minus 2.00 degrees, caster 0.00 to plus 4.00 degrees
- Construction: Forged steel
- Ball joint: maintenance-free, sealed, 25 percent larger stud than OE, 80 degrees of articulation
- Bushings: xAxis sealed flex joints in bonded rubber
- Built-in positive caster for lifted and leveled applications
- Sold as a pair
- Part number: 35490
Vehicle Applications
- 2008 Toyota Sequoia
- 2009 Toyota Sequoia
- 2010 Toyota Sequoia
- 2011 Toyota Sequoia
- 2012 Toyota Sequoia
- 2013 Toyota Sequoia
- 2014 Toyota Sequoia
- 2015 Toyota Sequoia
- 2016 Toyota Sequoia
- 2017 Toyota Sequoia
- 2018 Toyota Sequoia
- 2019 Toyota Sequoia
- 2020 Toyota Sequoia
- 2021 Toyota Sequoia
- 2022 Toyota Sequoia
- 2007 Toyota Tundra
- 2008 Toyota Tundra
- 2009 Toyota Tundra
- 2010 Toyota Tundra
- 2011 Toyota Tundra
- 2012 Toyota Tundra
- 2013 Toyota Tundra
- 2014 Toyota Tundra
- 2015 Toyota Tundra
- 2016 Toyota Tundra
- 2017 Toyota Tundra
- 2018 Toyota Tundra
- 2019 Toyota Tundra
- 2020 Toyota Tundra
- 2021 Toyota Tundra
FAQ
What vehicles do the SPC 35490 control arms fit?
They fit 2008-2022 Toyota Sequoia and 2007-2021 Toyota Tundra. Every fitted year is listed in the Vehicle Applications section above.
How much alignment adjustment do these arms provide?
The 35490 arms provide up to plus or minus 2.00 degrees of camber and 0.00 to plus 4.00 degrees of caster.
Are the SPC 35490 arms sold as a pair?
Yes. Part number 35490 is sold as a pair and covers both sides of the front axle.
Do these arms require maintenance?
No. They use sealed, maintenance-free ball joints and xAxis sealed flex joints, so no greasing is required.