This 255 LPH electric fuel pump assembly is built for Sniper EFI fuel tanks and includes a genuine Walbro fuel pump with oven-brazed fittings rated up to 100 psi.
Specifications:
- Product Type: Fuel Pump Module Assembly
- Flow Rate: 255 LPH
- Line Size: 1/4" NPT Supply and Return
- Pressure Rating: Up to 100 PSI
- Material: Steel, heavy 10-gauge no-warp mounting plate
- Finish: Black
- Fuel Type: Gasoline
- Origin: Made in USA
- Part Number: 19-165
Includes an in-tank wire harness with barbed vent fittings. When wiring, tighten the upper jam nut on the wire pass-through in 1/4-turn increments with a 9mm wrench until snug — do not overtighten, as this can crack the fitting or cause a leak.
FAQ
What flow rate does this fuel pump assembly deliver?
It's rated at 255 LPH using a genuine Walbro fuel pump.
What line size does it use?
It uses 1/4" NPT supply and return lines.
What pressure can the fittings withstand?
The oven-brazed fittings can withstand up to 100 psi.
Is there a caution for wiring the pump?
Yes. Tighten the wire pass-through jam nut with a 9mm wrench in 1/4-turn increments until the wire no longer moves — overtightening can break the fitting or cause a leak.

