QA1 Street Performance control arms are a direct upgrade for vehicles used for cruising and longer drives. Polyurethane bushings isolate road noise for a smoother ride while staying firm enough for good handling, and the integrated ball joint is stronger than the factory unit for long service life. High strength tubing and billet aluminum cross shafts make the arms light yet durable, and the double shear lower mounting is configured for QA1 Pro Coil systems. The arms are robotically welded and powder coated, and when used together they add roughly 3 to 4 degrees of caster and 0.5 to 1 degree of negative camber.
Specifications:
- Series: QA1 Street Performance
- Position: upper control arms
- Polyurethane bushings
- Integrated ball joint, stronger than factory
- High strength tubing with billet aluminum cross shafts
- Double shear lower mounting configured for QA1 Pro Coil systems
- Robotically welded and powder coated
- Adds about 3 to 4 degrees caster and 0.5 to 1 degree negative camber when used together
- Part number: 52722
Vehicle Applications:
- 1964 Buick Skylark
- 1965 Buick Skylark
- 1966 Buick Skylark
- 1967 Buick Skylark
- 1968 Buick Skylark
- 1969 Buick Skylark
- 1970 Buick Skylark
- 1971 Buick Skylark
- 1972 Buick Skylark
- 1964 Buick Special
- 1965 Buick Special
- 1966 Buick Special
- 1967 Buick Special
- 1968 Buick Special
- 1969 Buick Special
- 1964 Chevrolet Chevelle
- 1965 Chevrolet Chevelle
- 1966 Chevrolet Chevelle
- 1967 Chevrolet Chevelle
- 1968 Chevrolet Chevelle
- 1969 Chevrolet Chevelle
- 1970 Chevrolet Chevelle
- 1971 Chevrolet Chevelle
- 1972 Chevrolet Chevelle
- 1964 Chevrolet El Camino
- 1965 Chevrolet El Camino
- 1966 Chevrolet El Camino
- 1967 Chevrolet El Camino
- 1968 Chevrolet El Camino
- 1969 Chevrolet El Camino
- 1970 Chevrolet El Camino
- 1971 Chevrolet El Camino
- 1972 Chevrolet El Camino
- 1964 Chevrolet Malibu
- 1965 Chevrolet Malibu
- 1966 Chevrolet Malibu
- 1967 Chevrolet Malibu
- 1970 Chevrolet Monte Carlo
- 1971 Chevrolet Monte Carlo
- 1972 Chevrolet Monte Carlo
- 1964 Oldsmobile 442
- 1965 Oldsmobile 442
- 1966 Oldsmobile 442
- 1967 Oldsmobile 442
- 1968 Oldsmobile 442
- 1969 Oldsmobile 442
- 1970 Oldsmobile 442
- 1971 Oldsmobile 442
- 1964 Oldsmobile Cutlass
- 1965 Oldsmobile Cutlass
- 1966 Oldsmobile Cutlass
- 1967 Oldsmobile Cutlass
- 1968 Oldsmobile Cutlass
- 1969 Oldsmobile Cutlass
- 1970 Oldsmobile Cutlass
- 1971 Oldsmobile Cutlass
- 1972 Oldsmobile Cutlass
- 1967 Oldsmobile Cutlass Supreme
- 1968 Oldsmobile Cutlass Supreme
- 1969 Oldsmobile Cutlass Supreme
- 1970 Oldsmobile Cutlass Supreme
- 1971 Oldsmobile Cutlass Supreme
- 1972 Oldsmobile Cutlass Supreme
- 1964 Oldsmobile Vista Cruiser
- 1965 Oldsmobile Vista Cruiser
- 1966 Oldsmobile Vista Cruiser
- 1967 Oldsmobile Vista Cruiser
- 1968 Oldsmobile Vista Cruiser
- 1969 Oldsmobile Vista Cruiser
- 1970 Oldsmobile Vista Cruiser
- 1971 Oldsmobile Vista Cruiser
- 1972 Oldsmobile Vista Cruiser
- 1969 Pontiac Grand Prix
- 1970 Pontiac Grand Prix
- 1971 Pontiac Grand Prix
- 1972 Pontiac Grand Prix
- 1964 Pontiac GTO
- 1965 Pontiac GTO
- 1966 Pontiac GTO
- 1967 Pontiac GTO
- 1968 Pontiac GTO
- 1969 Pontiac GTO
- 1970 Pontiac GTO
- 1971 Pontiac GTO
- 1972 Pontiac GTO
- 1964 Pontiac LeMans
- 1965 Pontiac LeMans
- 1966 Pontiac LeMans
- 1967 Pontiac LeMans
- 1968 Pontiac LeMans
- 1969 Pontiac LeMans
- 1970 Pontiac LeMans
- 1971 Pontiac LeMans
- 1972 Pontiac LeMans
- 1964 Pontiac Tempest
- 1965 Pontiac Tempest
- 1966 Pontiac Tempest
- 1967 Pontiac Tempest
- 1968 Pontiac Tempest
- 1969 Pontiac Tempest
- 1970 Pontiac Tempest
FAQ
What type of control arm is this?
It is a QA1 Street Performance upper control arm set for GM A and G-Body vehicles, aimed at cruising and daily driving with improved handling.
What bushings and ball joint are used?
The arms use polyurethane bushings to isolate road noise and an integrated ball joint that is stronger than the factory unit.
How much alignment change do these arms add?
When upper and lower arms are used together they add about 3 to 4 degrees of caster and 0.5 to 1 degree of negative camber. Used on their own they add roughly half of those figures.
Are these arms set up for coil-overs?
Yes. The double shear lower mounting is configured for QA1 Pro Coil systems.
