QA1 Street Performance control arms are a direct upgrade for vehicles used for cruising and longer drives. Polyurethane bushings isolate road noise for a smoother ride while staying firm enough for good handling, and the integrated ball joint is stronger than the factory unit for long service life. High strength tubing and billet aluminum cross shafts make the arms light yet durable, and the double shear lower mounting is configured for QA1 Pro Coil systems. The arms are robotically welded and powder coated, and when used together they add roughly 3 to 4 degrees of caster and 0.5 to 1 degree of negative camber.
Specifications:
- Series: QA1 Street Performance
- Position: lower control arms
- Polyurethane bushings
- Integrated ball joint, stronger than factory
- High strength tubing with billet aluminum cross shafts
- Double shear lower mounting configured for QA1 Pro Coil systems
- Robotically welded and powder coated
- Adds about 3 to 4 degrees caster and 0.5 to 1 degree negative camber when used together
- Part number: 52766
Vehicle Applications:
- 1982 Chevrolet S10
- 1983 Chevrolet S10
- 1984 Chevrolet S10
- 1985 Chevrolet S10
- 1986 Chevrolet S10
- 1987 Chevrolet S10
- 1988 Chevrolet S10
- 1989 Chevrolet S10
- 1990 Chevrolet S10
- 1991 Chevrolet S10
- 1992 Chevrolet S10
- 1993 Chevrolet S10
- 1994 Chevrolet S10
- 1995 Chevrolet S10
- 1996 Chevrolet S10
- 1997 Chevrolet S10
- 1998 Chevrolet S10
- 1999 Chevrolet S10
- 2000 Chevrolet S10
- 2001 Chevrolet S10
- 2002 Chevrolet S10
- 2003 Chevrolet S10
- 2004 Chevrolet S10
- 1991 GMC Sonoma
- 1992 GMC Sonoma
- 1993 GMC Sonoma
- 1994 GMC Sonoma
- 1995 GMC Sonoma
- 1996 GMC Sonoma
- 1997 GMC Sonoma
- 1998 GMC Sonoma
- 1999 GMC Sonoma
- 2000 GMC Sonoma
- 2001 GMC Sonoma
- 2002 GMC Sonoma
- 2003 GMC Sonoma
- 2004 GMC Sonoma
FAQ
What type of control arm is this?
It is a QA1 Street Performance lower control arm set for Chevy S10 and GMC Sonoma vehicles, aimed at cruising and daily driving with improved handling.
What bushings and ball joint are used?
The arms use polyurethane bushings to isolate road noise and an integrated ball joint that is stronger than the factory unit.
How much alignment change do these arms add?
When upper and lower arms are used together they add about 3 to 4 degrees of caster and 0.5 to 1 degree of negative camber. Used on their own they add roughly half of those figures.
Are these arms set up for coil-overs?
Yes. The double shear lower mounting is configured for QA1 Pro Coil systems.
