Mishimoto MMBCC-STNGR-18PBE is a direct-fit baffled oil catch can kit for the 2018-2021 Kia Stinger GT and 2018-2021 Genesis G70 3.3T with the Lambda II T-GDi twin-turbo V6. Direct injection and turbocharging make this engine prone to carbon buildup, so the compact 2-port can is installed in line with the factory PCV system to separate fuel vapor and oil droplets from the crankcase gases. A 50 micron bronze filter and an internal air diverter add to the separation. The 2 oz billet 6061 aluminum can mounts on an application-specific bracket in a serviceable location away from most intake and supercharger kits, and pre-molded hoses connect it with 3/8-in and 1/2-in aluminum barbed fittings.
Notes:
- Check the can contents every 1,000 miles after installation until a baseline is established, since blow-by accumulation varies with ambient temperature and driving conditions. The contents should not rise above the internal baffle.
- Tighten all worm-gear clamps to 22 in-lbs (2.5 Nm). The clamps have an operating range of 18-27 in-lbs (2-3 Nm); do not exceed 27 in-lbs (3 Nm).
Included:
- (1) Compact Baffled Oil Catch Can
- (1) Application-Specific Mounting Bracket
- (2) Direct-Fit Hoses
- (1) 3/8-in Aluminum Barbed Fitting
- (1) 1/2-in Aluminum Barbed Fitting
- (4) Worm Gear Clamps
- Mounting Hardware
Specifications:
- Brand: Mishimoto
- Part Number: MMBCC-STNGR-18PBE
- Location: PCV side
- Can Capacity: 2 oz
- Can Material: Billet 6061 aluminum
- Filter: 50 micron bronze
- Fittings: 3/8-in Aluminium Barbed Fitting; 1/2-in Aluminium Barbed Fitting
- Engine: Lambda II T-GDi
Vehicle Applications
- 2018 Kia Stinger GT
- 2019 Kia Stinger GT
- 2020 Kia Stinger GT
- 2021 Kia Stinger GT
- 2018 Genesis G70 3.3T
- 2019 Genesis G70 3.3T
- 2020 Genesis G70 3.3T
- 2021 Genesis G70 3.3T
Fitment is from Mishimoto fitment data for this part number. Confirm year, model and engine before ordering.
FAQ
Which vehicles does the Mishimoto MMBCC-STNGR-18PBE fit?
It fits the 2018-2021 Kia Stinger GT and the 2018-2021 Genesis G70 3.3T with the Lambda II T-GDi twin-turbo V6.
What is included with the Mishimoto MMBCC-STNGR-18PBE?
The kit includes a compact baffled oil catch can, an application-specific mounting bracket, two direct-fit hoses, one 3/8-in and one 1/2-in aluminum barbed fitting, four worm gear clamps and mounting hardware.
How often should the Mishimoto MMBCC-STNGR-18PBE catch can be checked?
Check it every 1,000 miles after installation until a baseline is established, because blow-by accumulation varies with ambient temperature and driving conditions. Empty it before the contents rise above the internal baffle. The 2 oz can and filter are fully serviceable.
How long does the Mishimoto MMBCC-STNGR-18PBE take to install?
Installation takes less than 30 minutes with the pre-molded hoses. Tighten the worm-gear clamps to 22 in-lbs (2.5 Nm) and do not exceed 27 in-lbs (3 Nm).

