Mishimoto MMICP-RS-16HWBK is a hot-side intercooler pipe for the 2016-2018 Ford Focus RS with the 2.3L EcoBoost engine, in a wrinkle black powder-coated finish. It has 2.5 inch inlet and outlet diameters, 40 percent more internal volume than the stock hot-side pipe and 45 percent less pressure drop. The cast mid-section is shaped to retain the factory ducting that directs airflow to the front PTU, so the pipe does not block PTU cooling. 5-ply, wire-reinforced silicone connects the pipe to the turbo and intercooler and absorbs engine movement. The pipe is a direct fit with no modifications, installs without removing the lower cross bar and fits both the stock and Mishimoto Focus RS intercoolers.
Notes:
- Recommended torque for all T-bolt and constant-tension T-bolt clamps is 27 in-lbs (3NM). Their operating range is 18-35 in-lbs (2-4NM); do not exceed 35 in-lbs (4NM).
Included:
- (1) Hot-Side Intercooler Pipe
- (2) Silicone Couplers
- (2) Rubber Isolators
- (3) Constant-Tension T-Bolt Clamps
- (1) High-Torque Worm Gear Clamp
- Hardware
Specifications:
- Brand: Mishimoto
- Part Number: MMICP-RS-16HWBK
- Overall Length (in): 28.5
- Inlet (in): 2.5
- Outlet (in): 2.5
- Couplers: 5-ply, wire-reinforced silicone
- Finish: Wrinkle Black powder-coated
- Location: Hot-side
- Engine: 2.3L EcoBoost GTDi I4
- Chassis: C346
Vehicle Applications
- 2016 Ford Focus RS
- 2017 Ford Focus RS
- 2018 Ford Focus RS
Fits the C346 chassis with the 2.3L EcoBoost GTDi I4 engine.
Fitment is from Mishimoto fitment data for this part number. Confirm year, model and engine before ordering.
FAQ
Which vehicles does the Mishimoto MMICP-RS-16HWBK fit?
It fits the 2016-2018 Ford Focus RS with the 2.3L EcoBoost engine.
What is included with the Mishimoto MMICP-RS-16HWBK?
The kit includes the hot-side intercooler pipe, two silicone couplers, two rubber isolators, three constant-tension T-bolt clamps, one high-torque worm gear clamp and hardware.
Does the Mishimoto MMICP-RS-16HWBK affect airflow to the PTU?
No. The cast mid-section is shaped to retain the factory ducting that directs airflow to the front PTU, so PTU cooling is not blocked.
How does the Mishimoto MMICP-RS-16HWBK compare with the stock hot-side pipe?
It has 40 percent more internal volume and 45 percent less pressure drop than the stock hot-side pipe. Combined with the Mishimoto cold-side pipe and intercooler, the setup has 35 percent less pressure drop than the stock setup.
Does the lower cross bar need to be removed to install the Mishimoto MMICP-RS-16HWBK?
No. The pipe fits without removing the lower cross bar and is a direct fit with no modifications. Tighten the T-bolt clamps to 27 in-lbs (3NM) and do not exceed 35 in-lbs (4NM).

