Mishimoto MMBCC-S4-18PBE is a direct-fit baffled oil catch can kit for the 2018 and later Audi S4 and S5 (B9 chassis) with the 3.0 TFSI engine. It installs in line with the PCV system directly after the factory separator and uses a 50-micron bronze filter and internal baffle to pull oil and fuel vapor out of the crankcase gases before they reach the intake valves. The 3 oz compact can is billet 6061 aluminum sealed with Viton O-rings. The direct-fit hoses carry factory quick-disconnects and two Mishimoto one-way check valves that keep the can from becoming pressurized, and a petcock drain kit is included for draining the can.
Notes:
- Check the can contents every 1,000 miles after installation until a baseline is established, since blow-by accumulation varies with ambient temperature and driving conditions. The contents should not rise above the internal baffle.
- Tighten all worm-gear clamps to 22 in-lbs (2.5 Nm). The clamps have an operating range of 18-27 in-lbs (2-3 Nm); do not exceed 27 in-lbs (3 Nm).
Included:
- (1) Compact Baffled Oil Catch Can
- (1) Application-Specific Mounting Bracket
- (2) Mishimoto Performance One-Way Check Valves
- (2) Direct-Fit Hoses with Pre-Installed Factory Quick-Disconnects
- (2) 3/4-in Aluminum Barbed Fittings
- (1) Petcock Drain Kit
- (2) Worm Gear Clamps
- Mounting Hardware
Specifications:
- Brand: Mishimoto
- Part Number: MMBCC-S4-18PBE
- Location: PCV side
- Can Capacity: 3 oz
- Can Material: Billet 6061 aluminum
- Seals: Viton™ O-rings
- Filter: 50-micron bronze
- Fittings: 3/4-in Aluminum Barbed
- Engine: 3.0 TFSI
- Chassis: B9
Vehicle Applications
- 2018 Audi S4 3.0 TFSI
- 2018 Audi S5 3.0 TFSI
Mishimoto fitment covers 2018 and later Audi S4 and S5 models with the 3.0 TFSI engine (B9 chassis).
Fitment is from Mishimoto fitment data for this part number. Confirm year, model and engine before ordering.
FAQ
Which vehicles does the Mishimoto MMBCC-S4-18PBE fit?
It fits 2018 and later Audi S4 and S5 models on the B9 chassis with the 3.0 TFSI engine.
What is included with the Mishimoto MMBCC-S4-18PBE?
The kit includes a compact baffled oil catch can, an application-specific mounting bracket, two one-way check valves, two direct-fit hoses with factory quick-disconnects, two 3/4-in aluminum barbed fittings, a petcock drain kit, two worm gear clamps and mounting hardware.
Why does the Mishimoto MMBCC-S4-18PBE include check valves?
The two one-way check valves in the hoses prevent the catch can from becoming pressurized. The can sits in line with the PCV system right after the factory separator.
How often should the Mishimoto MMBCC-S4-18PBE catch can be checked?
Check it every 1,000 miles after installation until a baseline is established, because blow-by accumulation varies with ambient temperature and driving conditions. Empty it before the contents rise above the internal baffle. The included petcock drain kit simplifies draining.
How long does the Mishimoto MMBCC-S4-18PBE take to install?
Installation takes under 30 minutes. Tighten the worm-gear clamps to 22 in-lbs (2.5 Nm) and do not exceed 27 in-lbs (3 Nm).

