Mishimoto MMTL-FEX-MP95 is a 9.5-liter (2.5 gal) fluid extractor that removes fluids through a dipstick tube or other small opening instead of a drain plug. It works in a pneumatic mode that uses shop air to draw fluid into the canister, or in a manual mode when shop air is not available. Four draw straws from 2 to 7mm in diameter and four feet long fit most dipstick tubes, and a bleeder screw adapter allows brake and clutch fluid service. An automatic shut-off float prevents overfilling, and the lid unscrews so the extracted fluid can be emptied for recycling.
Notes:
- Recommended shop air pressure is 85 psi. Do not exceed 120 psi.
- Do not extract fluids hotter than 175°F.
Included:
- (1) Fluid Extractor
- (1) Adapter Hose
- (1) 2mm Straw
- (1) 4mm Straw
- (1) 6mm Straw
- (1) 7mm Straw
- (1) Bleeder Screw Adapter
- (1) Air Fitting
Specifications:
- Brand: Mishimoto
- Part Number: MMTL-FEX-MP95
- Fluid Capacity (gal): 2.5
- Capacity: 9.5L
- Operation: Manual and Pneumatic
- Compatible Fluids: Engine Oil, ATF, Power Steering Fluid, Coolant, Brake Fluid
- Material: Plastic
- Overall Height (in): 30
- Length (in): 9
- Overall Width (in): 9
- Diameter (in): Lid: 7.75 Body: 7.25in Base: 8.63in
- Maximum Fluid Temperature: 175F
- Recommended Shop Air Pressure: 85psi
- Maximum Shop Air Pressure: 120psi
FAQ
What fluids can the Mishimoto MMTL-FEX-MP95 extract?
It handles low-viscosity automotive fluids including engine oil, ATF, power steering fluid, coolant and brake fluid. Fluids above 175°F should not be extracted.
How much does the Mishimoto MMTL-FEX-MP95 hold?
The canister holds 9.5 liters, or 2.5 gallons, and an automatic shut-off float prevents overfilling.
Does the Mishimoto MMTL-FEX-MP95 need shop air?
No. It can run in pneumatic mode on shop air or in manual mode without it. In pneumatic mode the recommended pressure is 85 psi, and 120 psi should not be exceeded.
What is included with the Mishimoto MMTL-FEX-MP95?
The kit includes the fluid extractor, an adapter hose, 2mm, 4mm, 6mm and 7mm draw straws, a bleeder screw adapter and an air fitting.

