Mishimoto BNWS-009-320BK is a pair of 32mm hub-centric wheel spacers from the Borne Off-Road line for vehicles with a 8x180 bolt pattern, 124.1mm center bore and M14x1.5 studs, including single rear wheel 2011 and later Chevrolet Silverado 2500 HD and 3500 HD trucks. Each spacer is forged from 6061-T6 aluminum with a black anodized finish for corrosion protection and has grade-12.9 steel studs pre-installed. The hub-centric design acts as a direct extension of the axle hub on both front and rear axles for accurate wheel fitment and reduced load on the hardware. Spacers like these add track width and can create brake clearance or prevent tire rub.
Notes:
- Sold in pairs.
- Fits single rear wheel (SRW) trucks only. Does not fit dual rear wheel (DRW) trucks.
- Measure the vehicle to confirm thread pattern, center bore and thickness before ordering.
- Trimming the stock wheel studs may be required to prevent interference with the wheel.
Included:
- (2) Aluminum Wheel Spacers
- (16) M14x1.5 Lug Nuts
Specifications:
- Brand: Mishimoto
- Part Number: BNWS-009-320BK
- Thickness: 32mm
- Bolt Pattern: 8x180
- Center Bore (mm): 124.1
- Stud Thread: M14x1.5
- Material: 6061-T6 aluminum
- Studs: Grade-12.9 steel
- Design: Hub-centric
- Finish: Anodized
- Color: Black
- Quantity: Pair
Vehicle Applications
- 2011 Chevrolet Silverado 2500 HD
- 2011 Chevrolet Silverado 3500 HD
Mishimoto fitment for this part is open-ended and covers 2011 and later Chevrolet Silverado 2500 HD and 3500 HD trucks; only the first year is shown above. Fits single rear wheel (SRW) trucks only. Confirm the 8x180 bolt pattern, 124.1mm center bore and M14x1.5 studs on the vehicle before ordering.
Fitment is from Mishimoto fitment data for this part number. Confirm year, model and engine before ordering.
FAQ
Which vehicles do the Mishimoto BNWS-009-320BK wheel spacers fit?
Mishimoto fitment covers 2011 and later Chevrolet Silverado 2500 HD and 3500 HD trucks, single rear wheel only, and its vehicle selector names the 2011-2016 6.6L Duramax LML. They also fit other vehicles with an 8x180 bolt pattern, M14x1.5 studs and a 124.1mm center bore.
What is included with the Mishimoto BNWS-009-320BK?
The kit includes two aluminum wheel spacers with pre-installed studs and sixteen M14x1.5 lug nuts.
Do the stock wheel studs need to be trimmed for the Mishimoto BNWS-009-320BK?
They may. The stock studs must not touch the back of the wheel with the spacers installed, and trimming them may be required for clearance.
Do the Mishimoto BNWS-009-320BK spacers fit dual rear wheel trucks?
No. They are compatible with single rear wheel (SRW) trucks only and do not fit dual rear wheel (DRW) trucks.
What are the Mishimoto BNWS-009-320BK wheel spacers made of?
Each spacer is forged from 6061-T6 aluminum with a black anodized finish and uses grade-12.9 steel studs. The hub-centric design acts as a direct extension of the axle hub.

