Mishimoto MMWS-005-300BK is a pair of 30mm hub-centric wheel spacers for vehicles with a 5x114.3 bolt pattern, 60.1mm center bore and M12 x 1.5 studs, including the 2023 and later Toyota GR Corolla and a range of Toyota, Lexus and Scion models. Each spacer is forged from 6061-T6 aluminum with a black anodized finish for corrosion protection and has grade-12.9 steel studs pre-installed. The hub-centric design acts as a direct extension of the axle hub for accurate wheel fitment and reduced load on the hardware. Spacers like these add track width and can create brake clearance or prevent tire rub.
Notes:
- Sold in pairs.
- Measure the vehicle to confirm thread pattern, center bore and thickness before ordering. Fitment with aftermarket wheels must be confirmed by the buyer before ordering.
- Stock wheel studs must not touch the back of the wheel once the spacers are installed. Trimming the stock studs may be required for clearance.
- Wheel lug nuts must engage the studs for 8 full turns. If the lug nuts cannot be turned 8 or more times before reaching full torque, do not use the spacers.
- Remove corrosion from the hub before installation, since excessive corrosion can keep the spacer from fully seating.
- An alignment is recommended after installation because track width changes.
Included:
- (2) Aluminum Wheel Spacers
- (10) M12 X 1.5 Wheel Nuts
Specifications:
- Brand: Mishimoto
- Part Number: MMWS-005-300BK
- Thickness: 30mm
- Bolt Pattern: 5x114.3
- Center Bore (mm): 60.1
- Stud Thread: M12 x 1.5
- Material: 6061-T6 aluminum
- Studs: Grade-12.9 steel
- Design: Hub-centric
- Color: Black
- Quantity: Pair
Vehicle Applications
- 2023 Toyota GR Corolla 1.6L I3
- 2006 Lexus GS300 3.0L V6
- 2021-2022 Lexus ES250 2.5L L4
- 1992-2003 Lexus ES300 3.0L V6
- 2013-2020 Lexus ES300h 2.5L L4
- 2004-2006 Lexus ES330 3.3L V6
- 2007-2021 Lexus ES350 3.5L V6
- 2016-2020 Lexus GS F 5.0L V8
- 2016-2017 Lexus GS200t 2.0L L4
- 2018-2019 Lexus GS300 2.0L L4
- 1993-2005 Lexus GS300 3.0L L6
- 2007-2020 Lexus GS350 3.5L V6
- 1998-2000 Lexus GS400 4.0L V8
- 2001-2006 Lexus GS430 4.3L V8
- 2010-2018 Lexus GS450h 3.5L V6
- 2008-2011 Lexus GS460 4.6L V8
- 2012-2014 Lexus IS F 5.0L V8
- 2016-2017 Lexus IS200t 2.0L L4
- 2006-2015 Lexus IS250 2.5L V6
- 2018-2019 Lexus IS300 2.0L L4
- 2016-2019 Lexus IS300 3.5L V6
- 2001-2005 Lexus IS300 3.0L L6
- 2006-2019 Lexus IS350 3.5L V6
- 1990-2000 Lexus LS400 4.0L V8
- 2001-2006 Lexus LS430 4.3L V8
- 2015-2017 Lexus NX200t 2.0L L4
- 2018-2021 Lexus NX300 2.0L L4
- 2015-2021 Lexus NX300h 2.5L L4
- 2015-2021 Lexus RC F 5.0L V8
- 2016-2017 Lexus RC200t 2.0L L4
- 2018-2021 Lexus RC300 2.0L L4
- 2016-2021 Lexus RC300 3.5L V6
- 2015-2021 Lexus RC350 3.5L V6
- 1999-2003 Lexus RX300 3.0L V6
- 2004-2006 Lexus RX330 3.3L V6
- 2007-2022 Lexus RX350 3.5L V6
- 2018-2022 Lexus RX350L 3.5L V6
- 2006-2008 Lexus RX400h 3.3L V6
- 2011-2014, 2019-2022 Lexus RX450h 3.5L V6
- 1992-2000 Lexus SC300 3.0L L6
- 1992-2000 Lexus SC400 4.0L V8
- 2002-2010 Lexus SC430 4.3L V8
- 2019-2022 Lexus UX200 2.0L L4
- 2019-2022 Lexus UX250h 2.0L L4
- 2011-2016 Scion tC 2.5L L4
- 2008-2015 Scion xB 2.4L L4
- 2013-2022 Toyota Avalon 2.5L L4
- 2005-2022 Toyota Avalon 3.5L V6
- 1995-2004 Toyota Avalon 3.0L V6
- 1992-2001 Toyota Camry 2.2L L4
- 2002-2011 Toyota Camry 2.4L L4
- 2010-2022 Toyota Camry 2.5L L4
- 2004-2006 Toyota Camry 3.3L V6
- 2007-2022 Toyota Camry 3.5L V6
- 1992-2005 Toyota Camry 3.0L V6
- 2018-2020 Toyota C-HR 2.0L L4
- 2017-2018 Toyota Corolla iM 1.8L L4
- 2002-2007 Toyota Highlander 2.4L L4
- 2020 Toyota Highlander 2.5L L4
- 2009-2019 Toyota Highlander 2.7L L4
- 2004-2010 Toyota Highlander 3.3L V6
- 2008-2020 Toyota Highlander 3.5L V6
- 2002-2003 Toyota Highlander 3.0L V6
- 2009-2013 Toyota Matrix 1.8L L4
- 2009-2013 Toyota Matrix 2.4L L4
Mishimoto fitment data gives no end year for the following, which are covered from the year shown and later: Toyota GR Corolla 1.6L I3 from 2023. Confirm the 5x114.3 bolt pattern, 60.1mm center bore and M12 x 1.5 studs on the vehicle before ordering.
Fitment is from Mishimoto fitment data for this part number. Confirm year, model and engine before ordering.
FAQ
Which vehicles do the Mishimoto MMWS-005-300BK wheel spacers fit?
Mishimoto fitment covers the 2023 and later Toyota GR Corolla 1.6L I3 and a range of Toyota, Lexus and Scion models, including the Toyota Camry, Avalon and Highlander and the Lexus ES, GS, IS and RX. The full list by year and engine is in the Vehicle Applications section. They also fit other vehicles with a 5x114.3 bolt pattern, M12 x 1.5 studs and a 60.1mm center bore.
What is included with the Mishimoto MMWS-005-300BK?
The kit includes two aluminum wheel spacers with pre-installed studs and ten M12 x 1.5 wheel nuts.
Do the stock wheel studs need to be trimmed for the Mishimoto MMWS-005-300BK?
They may. The stock studs must not touch the back of the wheel with the spacers installed, and trimming them may be required for clearance.
How far must the lug nuts thread onto the Mishimoto MMWS-005-300BK studs?
The wheel lug nuts must engage the studs for 8 full turns. If they cannot be turned 8 or more times before reaching full torque, the spacers should not be used.
Is an alignment needed after installing the Mishimoto MMWS-005-300BK?
An alignment is recommended after installation because the spacers change the track width.

