Mishimoto MMWS-010-200BK is a pair of 20mm hub-centric wheel spacers for vehicles with a 5x120 bolt pattern, 67.1mm center bore and M14 x 1.5 studs, including the 2010-2022 Chevrolet Camaro and a range of Buick, Cadillac, Chevrolet, GMC and Pontiac models. Each spacer is forged from 6061-T6 aluminum with a black anodized finish for corrosion protection and has grade-12.9 steel studs pre-installed. The hub-centric design acts as a direct extension of the axle hub for accurate wheel fitment and reduced load on the hardware. Spacers like these add track width and can create brake clearance or prevent tire rub.
Notes:
- Sold in pairs.
- Fitment with aftermarket wheels must be confirmed by the buyer before ordering.
- Stock wheel studs must not touch the back of the wheel once the spacers are installed. Trimming the stock studs may be required for clearance.
- Wheel lug nuts must engage the studs for 10 full turns. If the lug nuts cannot be turned 10 or more times before reaching full torque, do not use the spacers.
- Remove corrosion from the hub before installation, since excessive corrosion can keep the spacer from fully seating.
- An alignment is recommended after installation because track width changes.
- The Mishimoto product name for this part gives the stud thread as M14x1.25, while its specification table, included wheel nuts and fitment summary give M14 x 1.5. Confirm the stud thread on the vehicle before ordering.
Included:
- (2) Aluminum Wheel Spacers
- (10) M14 X 1.5 Wheel Nuts
Specifications:
- Brand: Mishimoto
- Part Number: MMWS-010-200BK
- Thickness: 20mm
- Bolt Pattern: 5x120
- Center Bore (mm): 67.1
- Stud Thread: M14 x 1.5
- Material: 6061-T6 aluminum
- Studs: Grade-12.9 steel
- Design: Hub-centric
- Finish: Anodized
- Color: Black
- Quantity: Pair
Vehicle Applications
- 2019-2022 Buick Envision 2.0L L4
- 2019-2020 Buick Envision 2.5L L4
- 2010-2016 Buick LaCrosse 2.4L L4
- 2010 Buick LaCrosse 3.0L V6
- 2010-2016 Buick LaCrosse 3.6L V6
- 2011-2017 Buick Regal 2.0L L4
- 2011-2017 Buick Regal 2.4L L4
- 2016-2019 Cadillac ATS 3.6L V6
- 2020-2022 Cadillac CT5 2.0L L4
- 2020-2022 Cadillac CT5 3.0L V6
- 2022 Cadillac CT5 6.2L V8
- 2016-2019 Cadillac CT6 2.0L L4
- 2016-2019 Cadillac CT6 3.0L V6
- 2016-2020 Cadillac CT6 3.6L V6
- 2019-2020 Cadillac CT6 4.2L V8
- 2014-2019 Cadillac CTS 2.0L L4
- 2010-2014 Cadillac CTS 3.0L V6
- 2008-2019 Cadillac CTS 3.6L V6
- 2009-2019 Cadillac CTS-V 6.2L V8
- 2019-2022 Cadillac XT4 2.0L L4
- 2013-2019 Cadillac XTS 3.6L V6
- 2016-2022 Chevrolet Camaro 2.0L L4
- 2010-2022 Chevrolet Camaro 3.6L V6
- 2010-2022 Chevrolet Camaro 6.2L V8
- 2014-2015 Chevrolet Camaro 7.0L V8
- 2023 Chevrolet Corvette 5.5L V8
- 2020 Chevrolet Corvette 6.2L V8
- 2010-2017 Chevrolet Equinox 2.4L L4
- 2010-2012 Chevrolet Equinox 3.0L V6
- 2013-2017 Chevrolet Equinox 3.6L V6
- 2014 Chevrolet Impala 2.4L L4
- 2014-2019 Chevrolet Impala 2.5L L4
- 2014-2020 Chevrolet Impala 3.6L V6
- 2016 Chevrolet Malibu Limited 2.5L L4
- 2013-2015 Chevrolet Malibu 2.0L L4
- 2013-2014 Chevrolet Malibu 2.4L L4
- 2013-2015 Chevrolet Malibu 2.5L L4
- 2014-2016 Chevrolet SS 6.2L V8
- 2010-2017 GMC Terrain 2.4L L4
- 2010-2012 GMC Terrain 3.0L V6
- 2013-2017 GMC Terrain 3.6L V6
- 2008-2009 Pontiac G8 3.6L V6
- 2008-2009 Pontiac G8 6.0L V8
- 2009 Pontiac G8 6.2L V8
For the following, Mishimoto fitment is open-ended and covers the year shown and later: 2023 Chevrolet Corvette 5.5L V8; 2020 Chevrolet Corvette 6.2L V8. Confirm the 5x120 bolt pattern, 67.1mm center bore and M14 x 1.5 studs on the vehicle before ordering.
Fitment is from Mishimoto fitment data for this part number. Confirm year, model and engine before ordering.
FAQ
Which vehicles do the Mishimoto MMWS-010-200BK wheel spacers fit?
They fit the 2010-2022 Chevrolet Camaro along with Buick Envision, LaCrosse and Regal, Cadillac ATS, CT5, CT6, CTS, CTS-V, XT4 and XTS, Chevrolet Corvette, Equinox, Impala, Malibu and SS, GMC Terrain and Pontiac G8 models, in the years and engines shown in the vehicle list. They also fit other vehicles with a 5x120 bolt pattern, M14x1.5 studs and a 67.1mm center bore.
What is included with the Mishimoto MMWS-010-200BK?
The kit includes two aluminum wheel spacers with pre-installed studs and ten M14 X 1.5 wheel nuts.
Do the stock wheel studs need to be trimmed for the Mishimoto MMWS-010-200BK?
They may. The stock studs must not touch the back of the wheel with the spacers installed, and trimming them may be required for clearance.
How far must the lug nuts thread onto the Mishimoto MMWS-010-200BK studs?
The wheel lug nuts must engage the studs for 10 full turns. If they cannot be turned 10 or more times before reaching full torque, the spacers should not be used.
Is an alignment needed after installing the Mishimoto MMWS-010-200BK?
An alignment is recommended after installation because the spacers change the track width.

