Hooker 2289-1HKR is a set of Super Competition long tube headers for LS engine swaps in 1968-1972 Chevelle, El Camino, Monte Carlo and Sprint models. The primary tubes are 1-3/4 inch, 18 gauge mild steel and the collectors are 3 inches in diameter. The tubing is mandrel bent and the finish is silver ceramic. The flanges are 5/16-inch machined and all necessary hardware is included. They are compatible with stock floor shift linkage only. Header reducers are not included.
Notes:
- Compatible with stock floor shift linkage only. Column shift operation needs a Lokar, Speedway Motors or similar column linkage or cable shifter assembly that deletes the stock lower frame shift linkage parts near the collector.
- The headers are not compatible with stock spark plug wire heat shields. Aftermarket spark plug wires with 45 degree boots are recommended.
- Breaking in a new engine with ceramic coated headers installed will damage the coating. Use cast iron exhaust manifolds or old headers during break-in.
- Header reducers are not included.
- Works with all small block Chevy mounts and frame towers.
Included:
- Hardware for installation
Specifications:
- Brand: Hooker
- Part Number: 2289-1HKR
- Header Style: Long Tube
- Engine: GM Gen III/IV (LS)
- Primary Tube Diameter: 1-3/4 inch
- Collector Diameter: 3.00 inch
- Tube Material: Mild Steel
- Tube Gauge: 18 gauge
- Header Finish: Silver Ceramic
- Flange Thickness (in): 5/16
- Bolt size: M8 x 1.25 x 25mm
Vehicle Applications
- 1968 Chevelle/El Camino/Monte Carlo/Sprint
- 1969 Chevelle/El Camino/Monte Carlo/Sprint
- 1970 Chevelle/El Camino/Monte Carlo/Sprint
- 1971 Chevelle/El Camino/Monte Carlo/Sprint
- 1972 Chevelle/El Camino/Monte Carlo/Sprint
Fits 1968-1972 Chevelle, El Camino, Monte Carlo and Sprint models for LS engine swaps. Compatible with stock floor shift linkage only.
Confirm year, model, cab and bed configuration, and engine before ordering.
Race Use Only: This product is manufactured and sold for installation on vehicles used solely for competition. Once installed, the vehicle may not be used, registered, or licensed for use on a public road or highway. Installation on a street-driven vehicle may violate the Clean Air Act 203(a)(3), 42 U.S.C. 7522(a)(3).
FAQ
What vehicles does the Hooker 2289-1HKR fit?
It fits 1968-1972 Chevelle, El Camino, Monte Carlo and Sprint models for LS engine swaps.
Does the Hooker 2289-1HKR work with column shift?
It is compatible with stock floor shift linkage only. Column shift operation needs a Lokar, Speedway Motors or similar column linkage or cable shifter assembly that deletes the stock lower frame shift linkage parts near the collector.
What spark plug wires work with the Hooker 2289-1HKR?
The headers are not compatible with stock spark plug wire heat shields, so aftermarket spark plug wires with 45 degree boots are recommended.
What are the tube and collector sizes on the Hooker 2289-1HKR?
The primary tubes are 1-3/4 inch and the collectors are 3 inches in diameter. The tubing is 18 gauge mild steel with a silver ceramic finish.
Is the Hooker 2289-1HKR street legal?
No. This part is intended for racing use only. Installation on a vehicle driven on public roads may violate the Clean Air Act (42 U.S.C. 7522(a)(3)).

