The late-model factory power steering pump on Mopar Gen III Hemi engines produces too much pressure for the steering box on most older muscle cars and trucks. This Saginaw Type II pump produces the proper pressure and, paired with pulley 97-383, runs at the correct speed on the existing Gen III Hemi drive system. It's also used as a service part for the Holley High-Mount Accessory Drive System on the Ford 7.3L Godzilla engine.
Specifications:
- Category: Steering
- Product Type: Power Steering Pump
- Engine Application: Ford 7.3L Godzilla / Chrysler Gen III Hemi
- Material: Cast Aluminum
- Flow: 0.88 GPM at 465 RPM (Low) / 2.8 GPM at 1500+ RPM (High)
- Pressure: 1200 PSI
- Sub Category: Power Steering Hoses, Pumps, and Related Components
- Part Number: 198-104
Fits 2014-and-up Gen III Hemi engines (5.7L and 6.4L). Use with pulley 97-383 for the Hemi drive system, or pulley 97-152 for the Godzilla High-Mount Accessory Drive System. The complete kit (part # 97-382) includes the pump, reservoir, mounting plate, hardline adapter, and pulley. The power steering pulley must be installed with a tool rentable at most auto parts stores — incorrect installation can damage the pump internals, and once installed the pulley should sit flush with the end of the pump shaft. Replacement power steering cap: Detroit Speed # 99090007.
FAQ
What engines is this pump designed for?
2014-and-up Gen III Hemi engines (5.7L and 6.4L), and it also serves as a service part for the Ford 7.3L Godzilla High-Mount Accessory Drive System.
What pulley should be used with this pump?
Pulley 97-383 for Gen III Hemi applications, or pulley 97-152 for the Godzilla High-Mount Accessory Drive System.
Is a special tool needed to install the pulley?
Yes, the pulley must be installed with a tool rentable at most auto parts stores; incorrect installation can damage the pump internals.
