The Edelbrock 1309 is a VRS-4150 950 CFM four-barrel carburetor with a one-piece, 3.75 in tall cast aluminum body in a bead blast finish. It fits 4150 and 4500 flange manifolds. It uses 1.562 in venturis with banjo-style annular boosters, 1.750 in bores, mechanical secondaries, dual 50 cc accelerator pump circuits and power valves on the primary and secondary sides. Tuning hardware includes four-circuit billet metering blocks with industry-standard screw-in emulsion bleeds and jets, adjustable intermediate fuel circuits and interchangeable idle discharge jets with mixture screws in all four corners.
Notes:
- Includes a universal street throttle arm with common transmission kickdown take-off points.
- Built-in provisions for a standard GM three-wire TPS.
- Air bleeds on top of the carburetor for each fuel circuit.
- Nitrophyl floats, 7/8-20 fuel inlet thread and 5.12 in air cleaner flange.
- For gasoline. Gasket included; mounting hardware is not included.
Specifications:
- Brand: Edelbrock
- Part Number: 1309
- Part Type: Carburetor
- Series: VRS-4150
- CFM Rating: 950 cfm
- Barrel Quantity: 4 Barrel
- Flange Type: 4150 and 4500
- Material: Aluminum
- Finish: Bead Blast
- Bore Diameter: 1.750
- Secondary Opening Style: Mechanical
- Marine Approved: No
- Main Venturi Diameter: 1.562 in
- Fuel Compatibility: Gasoline
- Body Height: 3.75
- Gasket Included: Yes
- Secondary Venturi Diameter: 1.562 in
- Mounting Hardware Included: No
- Booster Type: Annular
- Primary Power Valve: Yes
- Secondary Power Valve: Yes
- Metering Block: Billet- Four Circuit in
- Secondaries: Mechanical
- Intermediate Circuit: Yes
- Accel Pump Well Size: 50 cc
- Standard Vacuum: 2 - 3/8" dia. and 2- 3/16" dia
- Jet Extenders: Yes- Secondary Side
- Adjustable Float Level: Yes
- Air Cleaner Flange Diameter: 5.12 in
- Float Material: Nitrophyl
- Inlet Fitting Thread Diameter: 7/8" -20
- Float Level: Center of window
- Manufacturer warranty: 12 months
Emissions Status
- For use on pre-pollution-controlled vehicles: 1965 and older U.S.-manufactured California-certified vehicles, 1967 and older U.S.-manufactured federally certified vehicles, and 1967 and older foreign-manufactured vehicles.
- For racing use only.
Race Use Only: This product is manufactured and sold for installation on vehicles used solely for competition. Once installed, the vehicle may not be used, registered, or licensed for use on a public road or highway. Installation on a street-driven vehicle may violate the Clean Air Act 203(a)(3), 42 U.S.C. 7522(a)(3).
FAQ
What manifolds does the Edelbrock 1309 fit?
It fits 4150 and 4500 flange intake manifolds.
What are the venturi and bore sizes of the 1309?
It has 1.562 in primary and secondary venturis and 1.750 in bores.
What accelerator pumps does the 1309 use?
It has dual 50 cc accelerator pump circuits.
What fuel is the 1309 made for?
It is made for gasoline.
Is the Edelbrock 1309 street legal?
It is not 50-state legal. Its emissions status is for pre-pollution-controlled vehicles and racing use only.
California Proposition 65: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

