The Edelbrock 1307 is a VRS-4150 750 CFM four-barrel carburetor with mechanical secondaries and a 3.75 in tall cast aluminum main body in a bead blast finish. It fits 4150 and 4500 flange manifolds without an adapter plate. It has four-circuit billet metering blocks with screw-in emulsion bleeds, power valves on the primary and secondary sides, adjustable intermediate fuel circuits and interchangeable idle discharge jets in all four corners. Bore diameter is 1.6875 in and main venturi diameter is 1.375 in.
Notes:
- Includes a street throttle arm, moly-coated throttle shafts and built-in provisions for a standard GM three-wire TPS.
- Vacuum ports: two 3/8 in and two 3/16 in.
- Fuel bowls have internal ribs and a sculpted baffle, and jet extenders are fitted on the secondary side.
- Idle bypass air adjustment screws are reachable without removing the air cleaner or scoop.
- Gasket included.
Specifications:
- Brand: Edelbrock
- Part Number: 1307
- Part Type: Carburetor
- Series: VRS-4150
- CFM Rating: 750 cfm
- Barrel Quantity: 4 Barrel
- Flange Type: 4150 and 4500
- Material: Aluminum
- Finish: Bead Blast
- Bore Diameter: 1.6875
- Main Venturi Diameter: 1.375
- Body Height: 3.75
- Gasket Included: Yes
- Primary Power Valve: Yes
- Secondary Power Valve: Yes
- Metering Block: Billet- Four Circuit in
- Secondaries: Mechanical
- Intermediate Circuit: Yes
- Standard Vacuum: 2 - 3/8" dia. and 2- 3/16" dia
- Jet Extenders: Yes- Secondary Side
- Flange Shape: 4150 and 4500
- Ported Timed Vacuum: Yes
- Booster Type: Standard straight leg
- Accel Pump Well Size: 30
- Maximum Flow Rating: 750
- Manufacturer warranty: 12 months
Emissions Status
- For use on pre-pollution-controlled vehicles: 1965 and older U.S.-manufactured California-certified vehicles, 1967 and older U.S.-manufactured federally certified vehicles, and 1967 and older foreign-manufactured vehicles.
FAQ
What manifolds does the Edelbrock 1307 fit?
It fits 4150 and 4500 flange intake manifolds without an adapter plate.
What type of secondaries does the 1307 have?
It has mechanical secondaries and power valves on both the primary and secondary sides.
What tuning features does the 1307 have?
It has four-circuit billet metering blocks with screw-in emulsion bleeds, adjustable intermediate fuel circuits, interchangeable idle discharge jets in all four corners and externally adjustable idle bypass air.
Does the 1307 accept a throttle position sensor?
Yes. It has built-in provisions for a standard GM three-wire TPS.
Is the Edelbrock 1307 street legal?
It is not 50-state legal. Its emissions status is for pre-pollution-controlled vehicles.
California Proposition 65: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

