The Edelbrock 77929 is a Victor aluminum cylinder head for competition big-block Chrysler B and RB engines, supplied with 2.20 in intake and 1.81 in exhaust valves. Intake ports are raised 0.650 in and exhaust ports 0.250 in, and the intake flange is extended 0.950 in so no intake spacer plates are needed. It has 280 cc intake runners, 72 cc combustion chambers and a 15 degree valve angle. The exhaust flange is extended 0.300 in from stock (same as Mopar Stage 6) and has dry exhaust bolt holes with Heli-Coil thread inserts. Sold as a single head.
Notes:
- Sold without valve springs or retainers; choose springs to match the camshaft.
- Fits Edelbrock Victor intake manifolds for both low-deck and high-deck engines.
- Offset intake rockers are required; the exhaust side accepts standard rockers.
- Some combinations may need additional pushrod hole clearance.
- Deck thickness: 5/8 in. Pushrod diameter: 3/8 in. Spark plug: 14 mm x 3/4 in reach, flat gasket seat.
- Sold individually; order two for a V8.
Specifications:
- Brand: Edelbrock
- Part Number: 77929
- Part Type: Engine Cylinder Head
- Intake Valve Diameter: 2.20 in
- Series: Victor
- Guide Plate Material: Hardened Steel
- Seat Angle: Exhaust 45 deg/Intake 45 deg
- Intake Runner Volume: 280 cc
- Material: Aluminum
- Valve Angle: 15 Degree
- Exhaust Valve Diameter: 1.81 in
- EGR Port: No
- Valve Stem Diameter: 0.3438
- Retainer Included: No
- Deck Thickness: 0.625 in
- Exhaust Port Location: +.250
- Exhaust Runner Volume: 100 cc
- Construction Type: Bare With Valves
- CNC Ported: No
- Guide Material: Manganese Bronze
- Valve Included: Yes
- Combustion Chamber Volume: 72 cc
- Valve Springs Included: No
- Seat Material: Ductile Iron
- Guide Plates Included: No
- Sold as: Each
- Manufacturer warranty: 12 months
Emissions Status
- For racing use only.
Race Use Only: This product is manufactured and sold for installation on vehicles used solely for competition. Once installed, the vehicle may not be used, registered, or licensed for use on a public road or highway. Installation on a street-driven vehicle may violate the Clean Air Act 203(a)(3), 42 U.S.C. 7522(a)(3).
FAQ
What engines does the Edelbrock 77929 fit?
Competition big-block Chrysler B and RB engines, low deck and high deck, with Edelbrock Victor intake manifolds.
Does the 77929 include springs and retainers?
No. It comes with valves installed, but valve springs and retainers are not included.
What rocker arms does the 77929 need?
Offset intake rockers are required. The exhaust side accepts standard rockers.
Do I need intake spacer plates?
No. The intake flange is extended 0.950 in, which removes the need for intake spacer plates.
Is the Edelbrock 77929 street legal?
It is not 50-state legal. Its emissions status is for racing use only.
California Proposition 65: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

