The Edelbrock 36031 is a universal, self-contained high-pressure fuel pump and sump unit that supplies EFI fuel pressure in vehicles with an existing low-pressure carbureted fuel system. It mounts under the hood, is adjustable from 35 to 90 PSI, has a vacuum reference port and flows 67 GPH (255 LPH), which supports up to 600 HP. This complete kit includes the electrical harness, mounting hardware, hose, filter and fittings.
Notes:
- Requires a vent line from the sump overflow vent port to the fuel tank.
- Works with the existing factory fuel tank and pump; no fuel return line, external fuel pressure regulator or fuel tank modification is needed.
- Not intended for off-road use, rock crawling, or applications where the vehicle is held at a sustained incline.
- Not E85 or oxygenated fuel compatible.
- The sump only, without hose, filter and fittings, is part number 36032.
Specifications:
- Brand: Edelbrock
- Part Number: 36031
- Part Type: Fuel Tank Sump
- Fuel Pressure Rating: 35-90 PSI
- Wiring Harness Included: Yes
- Hose Length: 8
- Fittings Included: Yes
- E85 Compatible: No
- Oxygenated Fuel Compatible: No
- Length: 9.5 in
- Material: Plastic
- CFM Rating: 67 gph / 255 lph
- Outlet End Type: Threaded
- Outlet Quantity: 1
- Width: 10
- Maximum Flow Rating: 67 GPH/255 LPH
- Mounting Hardware Included: Yes
- Height: 9
- Hose Included: Yes
- Fuel Pump Included: Yes
- Depth: 3.75
- Sold as: Kit
- Manufacturer warranty: 12 months
Emissions Status
- For use on pre-pollution-controlled vehicles: 1965 and older U.S.-manufactured California-certified vehicles, 1967 and older U.S.-manufactured federally certified vehicles, and 1967 and older foreign-manufactured vehicles.
- For engine swaps into uncontrolled or pre-pollution-controlled vehicles. Not legal for use on pollution-controlled vehicles.
- For racing use only.
Race Use Only: This product is manufactured and sold for installation on vehicles used solely for competition. Once installed, the vehicle may not be used, registered, or licensed for use on a public road or highway. Installation on a street-driven vehicle may violate the Clean Air Act 203(a)(3), 42 U.S.C. 7522(a)(3).
FAQ
What is the Edelbrock 36031 used for?
It provides the high, constant fuel pressure an EFI system needs in a vehicle that has a low-pressure carbureted fuel system, using the existing factory tank and pump.
What fuel pressure and flow does the 36031 deliver?
Fuel pressure is adjustable from 35 to 90 PSI, and the flow rate is 67 GPH (255 LPH), enough to support up to 600 HP.
What comes in the 36031 kit?
The sump with fuel pump, electrical harness, mounting hardware, hose, filter and fittings. A vent line from the sump overflow vent port to the fuel tank must also be installed.
What is the difference between the 36031 and the 36032?
The 36031 is the complete kit with hose, filter and fittings. The 36032 is the sump with harness and mounting hardware only, for installers using their own hose and fittings.
Is the Edelbrock 36031 street legal?
It is not 50-state legal. Its emissions status is for pre-pollution-controlled vehicles, engine swaps into those vehicles, and racing use only.
California Proposition 65: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

