The Edelbrock 7562 is a Performer RPM Air-Gap 2-R dual-plane, high-rise aluminum intake manifold for 396-502 cubic inch big-block Chevrolet V8s with rectangular-port cylinder heads. Its air-gap design separates the runners from the hot engine oil, and it uses a 180-degree firing order layout. It has a natural aluminum (satin) finish, a square-bore 4150-style carburetor flange, an operating range of 1,500 to 6,500 RPM and no EGR provision. It is cast and machined in the USA.
Notes:
- For rectangular-port heads and square-bore carburetors only.
- Will not fit under the stock hood of a Corvette, 1964-1967 Chevelle or 1967-1981 Camaro.
- Includes rear water outlets, two distributor clamp locations and nitrous bosses.
- Accepts late-model waterneck, A/C and alternator brackets, and H.E.I. distributors.
- No provision for exhaust-heated chokes and no exhaust crossover.
- Manifold height: 4.45 in front, 6.0 in rear. Carburetor pad height: 5.22 in.
- Port exit dimensions: 1.56 in x 2.24 in.
- Gaskets are not included. The matching intake gasket is Edelbrock 7202.
Specifications:
- Brand: Edelbrock
- Part Number: 7562
- Part Type: Engine Intake Manifold
- Series: RPM Air-Gap
- Material: Aluminum
- Finish: Satin
- RPM Operating Range: 1500-6500 RPM
- Gasket Included: No
- Rear Maximum Height: 6.000 in
- Plane Type: Dual
- Flange Type: 4150
- CNC Ported: No
- Center Maximum Height: 5.220 in
- EGR Port: No
- Front Maximum Height: 4.450 in
- Manufacturer warranty: 12 months
Engine Applications
- Chevrolet Big-Block Mark IV: 396 (6.5L)-502 (8.2L)
Vehicle Applications
- Avanti: II 1973-1974
- Chevrolet: Bel Air 1965-1975; Biscayne 1965-1972; Blazer 1973-1974; Brookwood 1969-1972; C10 1975-1980; C10 Pickup 1968-1974; C10 Suburban 1968-1980; C20 1975-1986; C20 Pickup 1968-1974; C20 Suburban 1968-1986; C30 1975-1986; C30 Pickup 1968-1974; Camaro 1967-1972; Caprice 1966-1976; Chevelle 1965-1973; Chevy II 1968; Corvette 1965-1974; El Camino 1968-1975; Estate 1969-1970; G10 Van 1973-1974; G20 1976; G20 Van 1973-1974; G30 1975-1976; G30 Van 1973-1974; Impala 1965-1976; K10 1976-1980; K10 Pickup 1968-1974; K10 Suburban 1968-1974; K20 1976-1978; K20 Pickup 1968-1974; K20 Suburban 1968-1972; K30 Pickup 1968-1974; K5 Blazer 1976-1978; Kingswood 1969-1972; Laguna 1973-1975; Malibu 1965-1967, 1973-1975; Monte Carlo 1970-1973; Nova 1969-1972; R30 1987-1988; R3500 1989; Townsman 1969-1972; V30 1987-1988; V3500 1989
- GMC: C15 1975-1978; C15 Suburban 1975-1978; C15/C1500 Pickup 1968-1974; C15/C1500 Suburban 1968-1974; C1500 1979-1980; C1500 Suburban 1979-1980; C25 1975-1978; C25 Suburban 1975-1978; C25/C2500 Pickup 1968-1974; C25/C2500 Suburban 1968-1974; C2500 1979-1986; C2500 Suburban 1979-1986; C35 1975-1978; C35/C3500 Pickup 1968-1974; C3500 1979-1986; G25 1975-1976; G35 1976; G35/G3500 Van 1973-1974; K15 1976; K15/K1500 Pickup 1968-1974; K15/K1500 Suburban 1968-1974; K1500 1980; K25 1976-1978; K25 Suburban 1976-1977; K25/K2500 Pickup 1968-1974; K25/K2500 Suburban 1968-1974; K35/K3500 Pickup 1968-1974; K3500 1979-1986; R3500 1987-1989; Sprint 1971-1975; V3500 1987-1989
- Pontiac: Acadian 1968-1971; Beaumont 1965-1969; Laurentian 1966-1970; Parisienne 1966-1970; Strato-Chief 1965-1970
Grouped by make, with model years for each model (80 models, 427 year, make and model combinations).
Fits only the versions of these vehicles equipped with a 396-502 big-block Chevrolet V8 with rectangular-port heads.
Emissions Status
- For use on pre-pollution-controlled vehicles: 1965 and older U.S.-manufactured California-certified vehicles, 1967 and older U.S.-manufactured federally certified vehicles, and 1967 and older foreign-manufactured vehicles.
- For engine swaps into uncontrolled or pre-pollution-controlled vehicles. Not legal for use on pollution-controlled vehicles.
FAQ
What engines does the Edelbrock 7562 fit?
It fits 396 to 502 cubic inch big-block Chevrolet Mark IV V8s with rectangular-port cylinder heads.
Will the 7562 fit under a stock hood?
It will not fit under the stock hood of a Corvette, a 1964-1967 Chevelle or a 1967-1981 Camaro.
What carburetor does the 7562 accept?
It has a square-bore 4150-style flange and is for square-bore carburetors only.
What features are built into the 7562?
It has rear water outlets, two distributor clamp locations and nitrous bosses, and it accepts late-model waterneck, A/C, alternator and H.E.I. components.
Is the Edelbrock 7562 street legal?
It is not 50-state legal. Its emissions status is for pre-pollution-controlled vehicles and engine swaps into those vehicles only.
California Proposition 65: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
