The Edelbrock 60947 is a bare Performer RPM aluminum cylinder head built for NHRA Stock and Super Stock use on 1955-1986 small-block Chevrolet V8s. It has 185 cc intake runners, 64 cc combustion chambers, a 23 degree valve angle and 45 degree intake and exhaust seats. Valve guides (manganese bronze) and seats (ductile iron) are installed, and the rocker stud and exhaust bolt holes have threaded inserts. It is designed for 1,500 to 6,500 RPM. Sold as a single head.
Notes:
- Bare head: no valves, springs or retainers are included. The guides and seats are installed but need final sizing and a valve job to match the valves used.
- Not for engines with less than a 4 in bore (262, 265, 283, 305 and 307 cubic inch) except with camshafts under 0.450 in valve lift.
- Stock rockers require pushrods 0.100 in longer than stock, such as Edelbrock 9629.
- Spark plug: 14 mm x 3/4 in reach with flat gasket seat (Champion RC12YC or equivalent).
- Sold individually; order two for a V8.
Specifications:
- Brand: Edelbrock
- Part Number: 60947
- Part Type: Engine Cylinder Head
- Series: Performer RPM
- Material: Aluminum
- Valve Angle: 23 Degree
- Intake Runner Volume: 185 cc
- Seat Angle: Exhaust 45 deg/Intake 45 deg
- Pushrod Diameter: 0.3125 (5/16) in
- Retainer Included: No
- Construction Type: Bare
- CNC Ported: No
- Exhaust Port Location: Standard
- Exhaust Runner Volume: 65 cc
- Guide Material: Manganese Bronze
- Valve Springs Included: No
- EGR Port: No
- Seat Material: Ductile Iron
- Guide Plates Included: No
- Deck Thickness: 0.5625 in
- Combustion Chamber Volume: 64 cc
- Sold as: Each
- Manufacturer warranty: 12 months
Engine Applications
- Chevrolet Small-Block Gen I: 302 (4.9L), 327 (5.4L), 350 (5.7L), 400 (6.6L)
Emissions Status
- For racing use only.
Race Use Only: This product is manufactured and sold for installation on vehicles used solely for competition. Once installed, the vehicle may not be used, registered, or licensed for use on a public road or highway. Installation on a street-driven vehicle may violate the Clean Air Act 203(a)(3), 42 U.S.C. 7522(a)(3).
FAQ
What engines does the Edelbrock 60947 fit?
It is designed for 1955-1986 small-block Chevrolet V8s, including 302, 327, 350 and 400 cubic inch engines. Engines with less than a 4 in bore can use it only with camshafts under 0.450 in valve lift.
What are the chamber and runner sizes of the 60947?
64 cc combustion chambers and 185 cc intake runners, with a 23 degree valve angle.
Does the 60947 come with valves and springs?
No. It is a bare head with guides and seats installed. It needs final guide sizing and a valve job to match the valves you use, plus valves, springs and retainers.
Is the 60947 sold as a pair?
No. It is sold individually, so a V8 needs two.
Is the Edelbrock 60947 street legal?
It is not 50-state legal. Its emissions status is for racing use only.
California Proposition 65: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

