Edelbrock part #3712 Performer-Plus camshaft is designed for small-block Oldsmobile 350-403 V-8 applications. This Edelbrock cam kit produced 330 ft-lbs. of torque when used with #3711 intake and stock iron cylinder heads on a 350 engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions. Camshaft Specifications: - Duration @ .050 Intake: 204 degrees - Duration @ .050 Exhaust: 214 degrees - Lift @ Valve Intake: .449" - Lift @ Valve Exhaust: .473" - Lobe Separation: 114 Degrees - Intake Centerline: 106 Degrees - Idle Vacuum @ 1000 RPM's: 16"
Edelbrock Engine Camshaft and Lifter Kit 3712
Specifications:
| Lifter Type | Hydraulic |
| Intake Duration .050 Inch Lift | 204 |
| Grade Type | Performance |
| Lifter Materials | Hardened Steel |
| Cam Type | Cast |
| Exhaust Valve Lift | 0.472 |
| RGL | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Advertised Intake Duration | 280 |
| Advertised Exhaust Duration | 290 |
| Intake Valve Lift | 0.448 |
| Exhaust Duration at .050 inch Lift | 204 |
| Computer Controlled Compatible | No |
| Lobe Separation | 114 |
| Description_ABR | Cam Lift kit |
| Description_INV | Edelbrock Performer-Plus Camshaft Kit |
| Description_LAB | Performer-Plus Camshaft Kit for Small-Block Oldsmobile 350-403 V8 |
| Description_ASM | Oldsmobile:Small-Block:350 (5.7L)/403 (6.6L) |
| Description_EXT | Edelbrock part #3712 Performer-Plus camshaft is designed for small-block Oldsmobile 350-403 V-8 applications. This Edelbrock cam kit produced 330 ft-lbs. of torque when used with #3711 intake and stock iron cylinder heads on a 350 engine. |
| Description_MKT | Edelbrock part #3712 Performer-Plus camshaft is designed for small-block Oldsmobile 350-403 V-8 applications. This Edelbrock cam kit produced 330 ft-lbs. of torque when used with #3711 intake and stock iron cylinder heads on a 350 engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions. Camshaft Specifications: - Duration @ .050 Intake: 204 degrees - Duration @ .050 Exhaust: 214 degrees - Lift @ Valve Intake: .449" - Lift @ Valve Exhaust: .473" - Lobe Separation: 114 Degrees - Intake Centerline: 106 Degrees - Idle Vacuum @ 1000 RPM's: 16" |
| Description_TRA | Recommended Valve Springs for OEM heads: Edelbrock part #5812 |
| Description_TRA | May require longer than stock pushrods. |
| Description_TRA | Will not fit 1966 & earlier. |
| Description_TRA | In order for this Performer-Plus cam and lifter kit to be covered under ANY WARRANTY you must use either the correct Edelbrock Sure Seat valve springs or the stock original equipment valve springs. |
| Description_TRA | Oil/additive must contain Zinc designed for use with flat tappet camshafts. |
| Description_TRA | Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring during initial start-up. |
| Description_TRA | Do not allow the engine to run under 2000 rpm for the first 1/2 hour. Slow idle speeds may result in severe cam and lifter wear. Start the engine and bring to break-in rpm. |
| Description_DEF | Engine Camshaft and Lifter Kit |
This Part Fits:
| Year | Make | Model | Submodel | Notes |
|---|---|---|---|---|
| 1973 | Buick | Apollo | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1974 | Buick | Apollo | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | Buick | Apollo | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1973 | Buick | Centurion | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1973 | Buick | Century | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1974 | Buick | Century | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | Buick | Century | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1976 | Buick | Century | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Buick | Century | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Buick | Century | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Buick | Century | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Buick | Electra | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Buick | Electra | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Buick | Electra | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1978 | Buick | Electra | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1978 | Buick | Electra | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Buick | Electra | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Buick | Electra | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1980 | Buick | Electra | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Buick | Estate Wagon | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Buick | Estate Wagon | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1978 | Buick | Estate Wagon | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1978 | Buick | Estate Wagon | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Buick | Estate Wagon | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Buick | Estate Wagon | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1980 | Buick | Estate Wagon | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Buick | GS | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Buick | LeSabre | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1973 | Buick | LeSabre | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1974 | Buick | LeSabre | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | Buick | LeSabre | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1976 | Buick | LeSabre | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Buick | LeSabre | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Buick | LeSabre | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Buick | LeSabre | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1978 | Buick | LeSabre | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1978 | Buick | LeSabre | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Buick | LeSabre | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1980 | Buick | LeSabre | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1973 | Buick | Regal | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1974 | Buick | Regal | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | Buick | Regal | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1976 | Buick | Regal | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Buick | Regal | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Buick | Regal | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Buick | Riviera | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Buick | Riviera | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Buick | Riviera | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1978 | Buick | Riviera | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1978 | Buick | Riviera | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Buick | Riviera | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1980 | Buick | Riviera | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Buick | Skylark | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Buick | Sportwagon | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Cadillac | Eldorado | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1980 | Cadillac | Eldorado | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1976 | Cadillac | Seville | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Cadillac | Seville | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1978 | Cadillac | Seville | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Cadillac | Seville | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1980 | Cadillac | Seville | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Chevrolet | Bel Air | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1973 | Chevrolet | Bel Air | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1974 | Chevrolet | Bel Air | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | Chevrolet | Bel Air | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Chevrolet | Biscayne | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Chevrolet | Brookwood | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Chevrolet | C10 Pickup | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Chevrolet | C20 Suburban | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Chevrolet | C30 Pickup | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Chevrolet | Camaro | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1973 | Chevrolet | Camaro | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1974 | Chevrolet | Camaro | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | Chevrolet | Camaro | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Chevrolet | Caprice | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1973 | Chevrolet | Caprice | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1974 | Chevrolet | Caprice | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | Chevrolet | Caprice | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Chevrolet | Chevelle | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1973 | Chevrolet | Chevelle | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Chevrolet | El Camino | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1973 | Chevrolet | El Camino | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1974 | Chevrolet | El Camino | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | Chevrolet | El Camino | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Chevrolet | G20 Van | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Chevrolet | Impala | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1973 | Chevrolet | Impala | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1974 | Chevrolet | Impala | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | Chevrolet | Impala | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Chevrolet | K10 Pickup | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Chevrolet | K10 Suburban | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Chevrolet | K20 Pickup | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Chevrolet | K20 Suburban | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Chevrolet | K30 Pickup | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Chevrolet | Kingswood | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1973 | Chevrolet | Laguna | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1974 | Chevrolet | Laguna | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | Chevrolet | Laguna | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1973 | Chevrolet | Malibu | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1974 | Chevrolet | Malibu | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | Chevrolet | Malibu | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Chevrolet | Monte Carlo | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1973 | Chevrolet | Monte Carlo | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1974 | Chevrolet | Monte Carlo | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | Chevrolet | Monte Carlo | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Chevrolet | Nova | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1973 | Chevrolet | Nova | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1974 | Chevrolet | Nova | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | Chevrolet | Nova | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Chevrolet | Townsman | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | GMC | C15/C1500 Pickup | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | GMC | C15/C1500 Suburban | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | GMC | C25/C2500 Pickup | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | GMC | C25/C2500 Suburban | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | GMC | C35/C3500 Pickup | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | GMC | K15/K1500 Pickup | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | GMC | K25/K2500 Pickup | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | GMC | K25/K2500 Suburban | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | GMC | K35/K3500 Pickup | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | GMC | Sprint | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1973 | GMC | Sprint | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1974 | GMC | Sprint | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | GMC | Sprint | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1966 | Oldsmobile | 442 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1967 | Oldsmobile | 442 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1968 | Oldsmobile | 442 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1969 | Oldsmobile | 442 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Oldsmobile | 98 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Oldsmobile | 98 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1978 | Oldsmobile | 98 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1978 | Oldsmobile | 98 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Oldsmobile | 98 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Oldsmobile | 98 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1980 | Oldsmobile | 98 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Oldsmobile | Custom Cruiser | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Oldsmobile | Custom Cruiser | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1978 | Oldsmobile | Custom Cruiser | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1978 | Oldsmobile | Custom Cruiser | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Oldsmobile | Custom Cruiser | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Oldsmobile | Custom Cruiser | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1980 | Oldsmobile | Custom Cruiser | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1966 | Oldsmobile | Cutlass | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1967 | Oldsmobile | Cutlass | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1968 | Oldsmobile | Cutlass | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1968 | Oldsmobile | Cutlass | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1969 | Oldsmobile | Cutlass | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1970 | Oldsmobile | Cutlass | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1971 | Oldsmobile | Cutlass | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Oldsmobile | Cutlass | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1973 | Oldsmobile | Cutlass | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1974 | Oldsmobile | Cutlass | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | Oldsmobile | Cutlass | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1976 | Oldsmobile | Cutlass | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Oldsmobile | Cutlass | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Oldsmobile | Cutlass | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Oldsmobile | Cutlass | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1980 | Oldsmobile | Cutlass | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Oldsmobile | Cutlass Calais | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1980 | Oldsmobile | Cutlass Calais | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1980 | Oldsmobile | Cutlass Cruiser | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | Oldsmobile | Cutlass Salon | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1976 | Oldsmobile | Cutlass Salon | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Oldsmobile | Cutlass Salon | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Oldsmobile | Cutlass Salon | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Oldsmobile | Cutlass Salon | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1968 | Oldsmobile | Cutlass Supreme | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1969 | Oldsmobile | Cutlass Supreme | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1970 | Oldsmobile | Cutlass Supreme | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1971 | Oldsmobile | Cutlass Supreme | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Oldsmobile | Cutlass Supreme | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1973 | Oldsmobile | Cutlass Supreme | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1974 | Oldsmobile | Cutlass Supreme | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | Oldsmobile | Cutlass Supreme | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1976 | Oldsmobile | Cutlass Supreme | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Oldsmobile | Cutlass Supreme | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Oldsmobile | Cutlass Supreme | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Oldsmobile | Cutlass Supreme | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1980 | Oldsmobile | Cutlass Supreme | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1976 | Oldsmobile | Cutlass Tiara | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1968 | Oldsmobile | Delmont 88 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1968 | Oldsmobile | Delta 88 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1969 | Oldsmobile | Delta 88 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1970 | Oldsmobile | Delta 88 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1971 | Oldsmobile | Delta 88 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Oldsmobile | Delta 88 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1973 | Oldsmobile | Delta 88 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1974 | Oldsmobile | Delta 88 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | Oldsmobile | Delta 88 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1976 | Oldsmobile | Delta 88 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Oldsmobile | Delta 88 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Oldsmobile | Delta 88 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1978 | Oldsmobile | Delta 88 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1978 | Oldsmobile | Delta 88 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Oldsmobile | Delta 88 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Oldsmobile | Delta 88 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1980 | Oldsmobile | Delta 88 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1966 | Oldsmobile | F85 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1968 | Oldsmobile | F85 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1969 | Oldsmobile | F85 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1970 | Oldsmobile | F85 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1971 | Oldsmobile | F85 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Oldsmobile | F85 | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1973 | Oldsmobile | Omega | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1974 | Oldsmobile | Omega | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | Oldsmobile | Omega | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1976 | Oldsmobile | Omega | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Oldsmobile | Omega | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Oldsmobile | Toronado | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1978 | Oldsmobile | Toronado | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Oldsmobile | Toronado | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1980 | Oldsmobile | Toronado | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1968 | Oldsmobile | Vista Cruiser | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1968 | Oldsmobile | Vista Cruiser | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1969 | Oldsmobile | Vista Cruiser | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1969 | Oldsmobile | Vista Cruiser | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1970 | Oldsmobile | Vista Cruiser | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1971 | Oldsmobile | Vista Cruiser | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Oldsmobile | Vista Cruiser | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1973 | Oldsmobile | Vista Cruiser | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1974 | Oldsmobile | Vista Cruiser | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | Oldsmobile | Vista Cruiser | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Pontiac | Bonneville | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Pontiac | Bonneville | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Pontiac | Bonneville | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1978 | Pontiac | Bonneville | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1978 | Pontiac | Bonneville | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Pontiac | Bonneville | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Pontiac | Bonneville | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1980 | Pontiac | Bonneville | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Pontiac | Catalina | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Pontiac | Catalina | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Pontiac | Catalina | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1978 | Pontiac | Catalina | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1978 | Pontiac | Catalina | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Pontiac | Catalina | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Pontiac | Catalina | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1980 | Pontiac | Catalina | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1976 | Pontiac | Firebird | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Pontiac | Firebird | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Pontiac | Firebird | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Pontiac | Firebird | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1978 | Pontiac | Firebird | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1979 | Pontiac | Firebird | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | Pontiac | Grand Am | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | Pontiac | Grand LeMans | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1976 | Pontiac | Grand LeMans | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Pontiac | Grand LeMans | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Pontiac | Grand LeMans | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Pontiac | Grand LeMans | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1976 | Pontiac | Grand Prix | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Pontiac | Grand Prix | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Pontiac | Grand Prix | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Pontiac | Grand Prix | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Pontiac | Grand Safari | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Pontiac | Grand Safari | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1978 | Pontiac | Grand Safari | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977,1980 | Pontiac | Laurentian | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | Pontiac | LeMans | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1976 | Pontiac | LeMans | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Pontiac | LeMans | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Pontiac | LeMans | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Pontiac | LeMans | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1972 | Pontiac | Parisienne | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1973 | Pontiac | Parisienne | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1974 | Pontiac | Parisienne | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Pontiac | Phoenix | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1975 | Pontiac | Ventura | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1976 | Pontiac | Ventura | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads,Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads | |
| 1977 | Pontiac | Ventura | Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 204/214 Deg.; Lift at Valve Int/Exh 0.449/0.473 in.; Lobe Spes 114 Deg.; Intake Center Line 106 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads |
Read More
Shipping Policy
Cancellations: Once an order is placed, in most cases it cannot be cancelled as they are sent for fulfillment almost immediately after receiving the order. If there is an ability to cancel the order, the buyer is responsible for the transaction fees charged from the transaction.
Processing Time: In stock orders are typically processed and shipped within 1-2 business days of receiving payment, unless otherwise stated on the product page. Orders placed on weekends or holidays will be processed on the next business day.
Shipping Costs: Shipping costs are calculated based on the shipping method selected, the weight and dimensions of the package, and the destination address. You can view the shipping costs for your order during the checkout process before finalizing your purchase.
Tracking Information: Once your order has been shipped, you will receive a shipping confirmation email with tracking information. You can use this information to track the status of your package and monitor its delivery progress.
Delivery Time: While we make every effort to ensure timely delivery, please note that delivery times may vary due to factors beyond our control, such as weather conditions or carrier delays.
International Shipping: For international orders, please be aware that customs duties, taxes, and other fees may apply upon delivery. These additional charges are the responsibility of the recipient and are not included in the shipping cost paid at checkout. Please check with your local customs office for information on potential fees before placing your order.
Shipping Address: Please ensure that the shipping address provided during checkout is accurate and complete. We are not responsible for orders shipped to incorrect or undeliverable addresses due to customer error.
Refund Policy
Thank you for shopping with us! We want you to be completely satisfied with your purchase. If you need to return an item, please make sure you read and understand our return policy outlined below:
Return Period: You have 30 calendar days from the date of purchase to return an item.
Restocking Fee: All returned items are subject to a 20% restocking fee. This fee will be deducted from your refund amount.
Shipping Responsibility: The buyer is responsible for all shipping costs associated with the return of the item. This includes the cost of shipping the item back to us.
RMA Number Requirement: Before returning any item, you must obtain a Return Merchandise Authorization (RMA) number from us. Please contact our customer service team to initiate the return process and receive your RMA number. Items returned without an RMA number will not be accepted.
Condition of Returned Items: All returned items must be in their original condition and packaging. Items must be unused, undamaged, and include all original parts and accessories.
Refund Process: Once we receive the returned item and verify its condition, we will process your refund within 3-5 business days. Refunds will be issued to the original payment method used for the purchase.
Damaged or Defective Items: If you receive a damaged or defective item, please contact us immediately for assistance. We will work with you to resolve the issue as quickly as possible.
Non-Returnable Items: Custom ordered products are not eligible for return. Please contact us for clarification before making your purchase.
Cancellations: Orders placed using installment or "payment plan" options that are canceled at the customer's request will be subject to a 7% fee to cover transaction-related costs. Standard transactions paid via credit card or PayPal that are canceled at the customer's request will incur a 3.5% processing fee.
Policy Changes: We reserve the right to update or modify this return policy at any time without prior notice. Any changes will be effective immediately upon posting on our website.
By making a purchase from us, you acknowledge that you have read, understood, and agreed to our return policy.
If you have any questions or concerns about our return policy, please don't hesitate to contact our customer service team for assistance.
Thank you for your understanding and cooperation.
Berry Performance Sales
sales@berryperformancesales.com
Frequently Asked Questions (FAQ)
How can I place an order?
To place an order, simply browse our website and add the desired items to your cart. Proceed to checkout, where you'll enter your shipping and payment information. Once your order is confirmed, you'll receive an email confirmation with your order details.
What payment methods do you accept?
We accept a variety of payment methods, including credit/debit cards (Visa, Mastercard, American Express), PayPal, and bank transfers.
Can I modify or cancel my order after it's been placed?
Unfortunately, after orders are processed and fulfilled, they cannot be modified or canceled. If you notice you need to make a change right after ordering, contact us immediately. If the order hasn’t been processed and fulfilled yet, we can make changes for you.
How do I track my order?
Once your order has been shipped, you will receive a shipping confirmation email with a tracking number. You can use this tracking number to monitor the progress of your shipment.
What is your return policy?
We offer a 30-day return period with a 20% restocking fee. Buyers are responsible for return shipping costs, and an RMA number is required for all returns. Please refer to our detailed return policy for more information.
Do you offer international shipping?
Yes, we offer international shipping to select countries. Shipping rates and delivery times may vary depending on the destination. Please contact us for more information regarding international shipping options.
How can I contact customer support?
Our customer support team is available via email sales@berryperformancesales.com or through the contact form on our website. We strive to respond to all inquiries within 24-48 hours during business days.
Are your products covered by a warranty?
Yes, many of our products come with a manufacturer's warranty. Warranty details vary by product, so please refer to the product description or contact us for specific warranty information.
I can’t find the product/brand I am looking for.
We are always expanding and have more products loading to our website daily. If you can't find what you need on our site, contact us and we can see if we can help.
How do the Rewards work?
Every $1 spent earns you 1 point. You can then use these points as discounts toward future purchases. You can view your existing points and ways to earn more by clicking the Rewards button at the bottom left corner of your screen. You must have an account with Berry Performance Sales to participate.
