The Edelbrock 85772 is an E-Series cylinder head bolt kit for 1992 and later Small-Block Chrysler 5.2L (318) and 5.9L (360) Magnum engines with Edelbrock Performer RPM cylinder heads 61767, 61769, 61779 and 61775. It is a complete set of head bolts and washers for a pair of heads to replace the factory bolts. The kit has ten 2.125 in and ten 4.625 in bolts, all 1/2 in coarse thread chromoly. E-Series bolts have a 190,000 PSI yield tensile strength, threads rolled after heat treating, a small hex head for socket clearance, a black oxide finish with sealer and an E stamped on the head.
Notes:
- Complete set of bolts and washers for a pair of heads.
- Torque to 95 ft-lbs in three steps (45, 65, 95) following the factory sequence, and re-torque after initial start-up and cool-down.
Specifications:
- Brand: Edelbrock
- Part Number: 85772
- Part Type: Engine Cylinder Head Bolt Set
- Thread Type: Coarse
- Thread Diameter: 0.50 in
- Minimum Length: 2.125 in
- Finish: Black Oxide
- Length: (10) 2.125 in, (10) 4.625 in
- Material: Chromoly
- Sold as: Kit
- Manufacturer warranty: 12 months
Engine Applications
- Chrysler Magnum: 318 (5.2L), 360 (5.9L)
FAQ
What engines does the Edelbrock 85772 fit?
1992 and later Chrysler 5.2L and 5.9L Magnum V8 engines with Edelbrock Performer RPM heads 61767, 61769, 61779 or 61775.
What is included in the 85772 kit?
Head bolts and washers for a pair of heads: ten 2.125 in and ten 4.625 in bolts, all 1/2 in diameter.
What torque is used with the 85772 bolts?
95 ft-lbs in three steps (45, 65, 95) following the factory sequence, with a re-torque after initial start-up and cool-down.
What material and finish are the 85772 bolts?
Chromoly steel with a black oxide finish and sealer, rated at 190,000 PSI yield tensile strength.
California Proposition 65: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

