The Edelbrock 85582 is an E-Series cylinder head bolt kit for 1965-1976 big-block Oldsmobile 400, 425 and 455 engines with Edelbrock cylinder heads 60529, 60515 and 60519. It is a complete set of head bolts and hardened washers for a pair of heads and is required when installing Edelbrock heads on an engine that previously had cast-iron heads; the bolts are longer to make up for the washer thickness. The kit has sixteen 4.180 in and four 3.060 in bolts, all 7/16 in coarse thread chromoly. E-Series bolts have a 190,000 PSI yield tensile strength, threads rolled after heat treating, a small hex head for socket clearance, a black oxide finish with sealer and an E stamped on the head.
Notes:
- Complete set of bolts and hardened washers for a pair of heads.
- Use Edelbrock head gasket 7340 or equivalent.
- Torque 7/16 in bolts to 85 ft-lbs in three even steps. Heads drilled out for 1/2 in bolts are torqued to 90 ft-lbs.
Specifications:
- Brand: Edelbrock
- Part Number: 85582
- Part Type: Engine Cylinder Head Bolt Set
- Thread Type: Coarse
- Thread Diameter: 0.4375 in
- Finish: Black Oxide
- Length: (16) 4.180 in, (4) 3.060 in
- Material: Chromoly
- Sold as: Kit
- Manufacturer warranty: 12 months
Engine Applications
- Oldsmobile: 307 (5.0L)-403 (6.6L)
- Oldsmobile: 400 (6.6L)-455 (7.5L)
FAQ
What engines does the Edelbrock 85582 fit?
1965-1976 big-block Oldsmobile 400, 425 and 455 engines with Edelbrock heads 60529, 60515 or 60519.
What is included in the 85582 kit?
Head bolts and hardened washers for a pair of heads: sixteen 4.180 in and four 3.060 in bolts, all 7/16 in diameter.
What torque is used with the 85582 bolts?
85 ft-lbs for the 7/16 in bolts, applied in three even steps.
Which head gasket goes with the 85582?
Edelbrock head gasket 7340 or an equivalent.
California Proposition 65: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

