Diode Dynamics DD7986 is a pair of Elite Series Type Y LED fog lamps in selective yellow (3000K). Each lamp is built around a single-piece toroidal lens and produces an asymmetric pattern with an 80-degree spread. The yellow lamp pairs a yellow multi-die LED emitter with a yellow-tinted lens, and each lamp has an integrated amber backlight. The lamps bolt in place of the factory fog light assembly using the included 3D-printed brackets.
Notes:
- The SAE F3 fog lamp standard applies to this fog lamp. Check local laws and regulations for aiming, installation and applicability.
- The amber backlight can be wired to any constant 12-volt supply using the included tap connector, and it shuts off automatically when the main beam is activated. Check local laws and regulations for acceptable use.
- The brackets have built-in adjustment, so the lamps can be aimed after installation.
Included:
- Two Elite Series fog lamps
- 3D-printed brackets
- Pair of waterproof plug-and-play adapters for the factory bulb sockets
- Tap connector for the amber backlight
Specifications:
- Brand: Diode Dynamics
- Part Number: DD7986
- Series: Elite Series
- Type: Type Y
- Quantity: Pair
- Color: Yellow
- Color Temperature (K): 3000
- Spread: 80-degree
- Lens: Single-piece toroidal lens
- Backlight Color: Amber
- LED: Multi-die automotive emitters
- Circuit Board: Full-copper circuit boards
FAQ
What is the Diode Dynamics DD7986?
DD7986 is a pair of Elite Series Type Y fog lamps in yellow at 3000K. The lamps replace the factory fog light assembly, so confirm that Type Y matches the fog light assembly on the vehicle before ordering.
What color and beam spread is the DD7986?
DD7986 is selective yellow at 3000K. The lamps have an asymmetric pattern with an 80-degree spread.
How does the DD7986 connect?
A pair of waterproof plug-and-play adapters are included to connect the lamps to the factory bulb sockets. The main beam is plug and play with no modification needed.
How does the DD7986 backlight work?
Each lamp has an integrated amber backlight. It can be wired to any constant 12-volt supply using the included tap connector, and it shuts off automatically if the main beam is activated.
Does the DD7986 meet a fog lamp standard?
The SAE F3 fog lamp standard applies to this fog lamp. Check local laws and regulations for aiming, installation and applicability.

