This BluePrint Engines 454 cubic inch GM big block crate engine is a deluxe dressed build that BluePrint lists as a Cruiser with a polished pulley kit, rated at 460 horsepower and 479 lb-ft of torque. It uses a cast iron 4-bolt main block, hydraulic roller cam, and BluePrint PS8013 aluminum heads, and it comes with a Holley Sniper 2 EFI System, dual plane intake, distributor, harmonic balancer, and the front accessory drive components listed below.
Specifications:
- Displacement: 454 c.i.
- Horsepower: 460 HP
- Torque: 479 lb-ft
- Bore: 4.250 in
- Stroke: 4.000 in
- Compression ratio: 9.85:1
- Block: High-strength cast iron 454 BBC, manufactured and machined in the USA, standard deck, 4-bolt main, 4.250 in bore, 1-piece rear main seal, mechanical fuel pump provision
- Crankshaft: Cast, 4.000 in stroke
- Connecting rods: OEM type, 6.135 in, with 150,000 PSI bolts
- Pistons: Hypereutectic, dome, 26cc
- Cylinder heads: BluePrint aluminum PS8013, 119cc chamber, 2.30 in intake / 1.88 in exhaust valves, 316cc intake / 124cc exhaust runners, .300 in raised exhaust port versus OEM casting (verify header and exhaust clearance)
- Camshaft: Hydraulic roller, .501 in intake / .510 in exhaust lift, 216/228 duration at .050, 112 deg LSA
- Induction: Fuel injected: Holley Sniper 2 EFI System (BPP550-510-3XX)
- Balance: Externally balanced front and rear (external 42.5 oz. imbalance)
- Ignition timing: Initial 10-16 degrees, total 32-34 degrees
- Fuel: 91+ octane
- Part number: BP454CTFK
What's Included: This is a deluxe dressed, fuel injected engine with a polished pulley kit. BluePrint itemizes the following: Holley Sniper 2 EFI System (BPP550-510-3XX), Pro Billet ready run distributor (BPP350RBK), dual plane satin aluminum intake manifold, harmonic balancer (BPP454E), BluePrint valve covers, BluePrint dipstick, timing cover, oil pump, oil pan, polished pulley kit (BPP454FDPSAC4), reverse rotation short water pump, 1-wire 140 amp alternator, peanut style air conditioning compressor, and Type II power steering pump with remote reservoir.
Engine Platform: Built to the GM big block (BBC) platform, listed by BluePrint as a Cruiser. The engine has an external 42.5 oz. imbalance, and BluePrint recommends its flywheel 14096987 or flex plate 399973. BluePrint also recommends electric fans producing 4000 cfm or more for engines over 400 c.i. The front accessory drive fits many vehicles, but BluePrint advises measuring to confirm fitment.
Prop 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information visit www.P65Warnings.ca.gov.
FAQ
What comes on the BP454CTFK deluxe dressed engine?
BluePrint itemizes a Holley Sniper 2 EFI System (BPP550-510-3XX), a Pro Billet ready run distributor (BPP350RBK), a dual plane satin aluminum intake manifold, a harmonic balancer (BPP454E), BluePrint valve covers, a BluePrint dipstick, a timing cover, an oil pump, and an oil pan, plus a polished pulley kit (BPP454FDPSAC4), a reverse rotation short water pump, a 1-wire 140 amp alternator, a peanut style air conditioning compressor, and a Type II power steering pump with remote reservoir.
How much power does it make?
It is rated at 460 horsepower and 479 lb-ft of torque.
What EFI system does it use?
It uses the Holley Sniper 2 EFI System, part number BPP550-510-3XX. BluePrint lists an EFI fuel pump kit (BPP5267) only as a related product, not as an included item.
What octane does it require?
It is a 9.85:1 engine that BluePrint lists for 91+ octane fuel.
Does the front accessory drive fit every vehicle?
BluePrint states the front accessory drive fits many vehicles but must be measured and confirmed for your application. It is low profile, and power steering hoses, alternator wiring, fittings, or fabrication may be needed.
