This BluePrint Engines 347 cubic inch Ford Small Block crate engine is a base dressed, electronic fuel injected build rated at 415 horsepower and 415 lb-ft of torque. It arrives with the EFI system, intake, distributor, and other top-end components already installed, built on a cast iron block with forged rods, a hydraulic roller cam, and BluePrint aluminum heads. The 347 cubic inch displacement comes from a 4.000 in bore and a 3.400 in stroke.
Specifications:
- Displacement: 347 c.i. (5.7L)
- Horsepower: 415 HP
- Torque: 415 lb-ft
- Bore: 4.000 in
- Stroke: 3.400 in
- Compression ratio: 10.0:1
- Block: High-strength cast iron, increased deck thickness and strength webbing, priority main oiling, 4-bolt main, 1-piece rear main seal, improved water jacket design
- Crankshaft: Cast, 3.400 in stroke
- Connecting rods: Forged, 5.400 in
- Pistons: Forged
- Cylinder heads: BluePrint aluminum HP9009, 60cc chamber, 2.02 in intake / 1.60 in exhaust valves, 190cc intake / 60cc exhaust runners
- Camshaft: Hydraulic roller, .543 in intake / .554 in exhaust lift, 218/226 duration at .050, 112 deg LSA
- Induction: EFI: Holley Sniper 2 EFI System (BPP550-510-3XX) on a dual plane satin aluminum intake manifold (BPP302INT)
- Balance: 28oz externally balanced front and rear
- Ignition timing: 10-16 degrees initial, 32-34 total
- Fuel: 91+ octane
- Part number: BP3479CTF
What's Included: This is a base dressed, EFI engine. It comes with the Holley Sniper 2 EFI System (BPP550-510-3XX), a dual plane satin aluminum intake manifold (BPP302INT), a Pro-Series Ready Run distributor (BPP3023BK), a 28 oz harmonic balancer (BPP28), a black front sump oil pan (BPP302FSPAN), BluePrint logo'd valve covers (BPP9237), a BluePrint timing cover (BPP302351TC), and a BluePrint dipstick (BPP6920). BluePrint's description also mentions a water pump, spark plugs and wires, and a thermostat with housing, but its itemized list does not show them, so confirm with BPS before ordering if they are needed. The itemized list does not include a flywheel or flex plate, or a starter.
Engine Platform: Built to the Ford small block platform. It is specified for 91+ octane fuel.
Prop 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information visit www.P65Warnings.ca.gov.
FAQ
What comes on the BP3479CTF base dressed engine?
It includes the Holley Sniper 2 EFI System (BPP550-510-3XX), a dual plane satin aluminum intake manifold (BPP302INT), a Pro-Series Ready Run distributor (BPP3023BK), a 28 oz harmonic balancer (BPP28), a black front sump oil pan (BPP302FSPAN), BluePrint logo'd valve covers (BPP9237), a BluePrint timing cover (BPP302351TC), and a BluePrint dipstick (BPP6920). BluePrint's description also mentions a water pump, spark plugs and wires, and a thermostat with housing, but its itemized list does not show them, so confirm with BPS before ordering if they are needed. The itemized list does not include a flywheel or flex plate, or a starter.
How much power does it make?
It is rated at 415 horsepower and 415 lb-ft of torque by BluePrint Engines.
What EFI system is on it?
It comes with the Holley Sniper 2 EFI System (BPP550-510-3XX), which BluePrint lists as part of the engine package, on a dual plane satin aluminum intake.
What octane does it require?
It is a 10.0:1 engine specified for 91 octane or higher.
Is this a complete engine?
It is a base dressed long block with the components listed above installed. It does not include a flywheel or flex plate, or a starter.
