This BluePrint Engines 302 cubic inch Ford small block crate engine is a base dressed, carbureted rear sump build rated at 361 horsepower and 334 lb-ft of torque. It arrives with the Holley 600 CFM Street Warrior carburetor, intake manifold, distributor, harmonic balancer, valve covers, and timing cover already installed. It is built on a cast iron block with a hydraulic roller cam, hypereutectic pistons, and BluePrint aluminum HP9008 heads. Every BluePrint crate engine is dyno tested and ships with a dyno printout of its results.
Specifications:
- Displacement: 302 c.i. (4.9L)
- Horsepower: 361 HP
- Torque: 334 lb-ft
- Bore: 4.000 in
- Stroke: 3.000 in
- Compression ratio: 9.4:1
- Block: High-strength cast iron with increased deck thickness and strength webbing, priority main oiling, 4-bolt main, 1-piece rear main seal, improved water jacket design
- Crankshaft: Cast, 3.000 in stroke
- Connecting rods: OEM type, 5.090 in
- Pistons: Hypereutectic
- Cylinder heads: BluePrint aluminum HP9008, 60cc chamber, 2.02 in intake / 1.60 in exhaust valves, 190cc intake / 60cc exhaust runners
- Camshaft: Hydraulic roller, .533 in intake / .544 in exhaust lift, 215/220 duration at .050, 114 deg lobe separation
- Induction: Carbureted: Holley 600 CFM Street Warrior (BPP080457SA) on intake manifold BPP302INT
- Oil pan: Rear sump
- Balance: 50 oz, externally balanced front and rear
- Ignition timing: 10-16 degrees initial, 32-34 total
- Fuel: 87+ octane
- Part number: BP302RCTC
What's Included: This is a base dressed, carbureted, rear sump engine. Per the BluePrint listing, it includes: Dual/Rear Sump Oil Pan - BPP302RSPAN; Holley 600 CFM Street Warrior Carburetor - BPP080457SA; Intake Manifold - BPP302INT; Pro-Series Ready Run Distributor - BPP3023BK; 50oz Harmonic Balancer - BPP50; BluePrint Logo'd Valve Covers - BPP9237; BluePrint Timing Cover - BPP302351TC; BluePrint Dipstick - BPP6920.
Engine Platform: Built to the Ford small block platform. It runs on 87+ octane fuel, and the BluePrint HP9008 aluminum heads use 2.02 in intake and 1.60 in exhaust valves.
Prop 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information visit www.P65Warnings.ca.gov.
FAQ
What is included with the BP302RCTC base dressed engine?
It includes the Holley 600 CFM Street Warrior carburetor (BPP080457SA), intake manifold (BPP302INT), Pro-Series Ready Run distributor (BPP3023BK), 50 oz harmonic balancer (BPP50), logo valve covers (BPP9237), and timing cover (BPP302351TC). The BluePrint page does not list a flywheel or flex plate, starter, or clutch or converter among the included items.
How much power does it make?
It is rated at 361 horsepower and 334 lb-ft of torque, and ships with a dyno printout of its tested results.
Does it use EFI or a carburetor?
It uses a Holley 600 CFM Street Warrior carburetor (BPP080457SA) on intake manifold BPP302INT, with a Pro-Series Ready Run distributor for ignition.
Is this a rear sump engine?
Yes, this listing is the rear sump configuration. The oil pan is listed by BluePrint as the Dual/Rear Sump Oil Pan (BPP302RSPAN).
What driving use is it designed for?
BluePrint describes it as a street cruiser and daily driver build. It runs on 87+ octane fuel, and BluePrint recommends electric fans producing 3000 cfm or more for engines of 400 cubic inches or less.
