Low friction economical OEM-style ball joint from Allstar Performance, built as a high-performance unit for smooth suspension travel. The pin is hardened and installed in a stock-type housing that is not rebuildable, making it legal for classes that require non-take-apart ball joints. For off-road use only.
This lower, screw-in low friction joint uses a 1-1/2 in/ft taper matching the K727 style, with a 2 in body at thread, at standard (non-extended) length. Hardware is included.
Spec Sheet: Allstar Low Friction Ball Joint Spec Sheet (PDF)
Compatibility
The ALL56030 is a low friction OEM-style ball joint matching the K727 taper and pin style. It is not vehicle-specific — verify housing bore and taper against the ball joint being replaced before ordering.
FAQ
Is the Allstar Performance ALL56030 low friction ball joint rebuildable?
No. The ALL56030 uses a hardened pin in a stock-type housing and is not rebuildable. It is legal for racing classes that require non-take-apart ball joints and is intended for off-road use only.
What taper does the ALL56030 use?
The ALL56030 is a screw-in lower ball joint with a 1-1/2 in/ft taper (K727 style) and a 2 in body at thread, at standard length. Hardware is included.

