Holley EFI Gen III HEMI Main Harness Late w/ TPS and Idle Air Control Connections 558-116
Specifications:
| Description_INV | HEMI MAIN HARNESS, LATE, W/ TPS & IAC |
| Description_ASC | Note: The TPS and IAC connectors are designed for Holley 4 BBL style throttle bodies. If you are using a different throttle body, you may have to change the pins and connectors. When using the 558-116 Harness you MUST use a Chrysler 514-9230-AA Crank Sensor. This sensor MUST be used when utilizing a 60-2 Ignition Strategy. This sensor is standard on 2009-12 Chrysler/Dodge/Jeep applications and is a direct replacement sensor for 2013+ engines. |
| Description_DES | Gen III HEMI Main Harness Late w/ TPS and Idle Air Control Connections |
| Description_EXT | Gen III HEMI Main Harness w/Throttle Position Sensor & Idle Air Control, For Late Crank & Cam Sensors, for HP EFI & Dominator EFI, For use with Cable Throttle Body. |
| Description_MKT | Gen III HEMI Harness with TPS and Idle Air Control Connections. This wiring harness interfaces a Holley EFI ECU to a Gen III HEMI engine with an aftermarket cable actuated throttle body. It is meant to be used in conjunction with an injector harness, a coil harness, and two ignition modules. Most stock sensors are used with this harness. There are two optional connectors for interfacing with CAN-based Holley modules. |
| Description_FAB | Gen III Hemi Main Harness with IAC motor wiring/connector and TPS wiring/connector |
| Description_FAB | Take control of your Gen III HEMI with Holley EFI by controlling fuel and spark. Great for power upgrades and engine swaps. |
| Description_FAB | Capable of tuning with power adders such as nitrous, superchargers or turbos and compatible with methanol and water injection |
| Description_FAB | Harnesses are available to connect to a Gen III HEMI engine for the most advanced fuel and timing controls available |
| Description_FAB | Each Harness is designed in fit and function specifically for the Gen III HEMI engine platform |
| Description_FAB | All wiring is TXL grade copper wiring with minimal weight, high temp sleeve in a small diameter |
| Description_FAB | Factory style terminations provide a strong, secure connection |
| Description_FAB | Connectors are OEM grade for a correct, positive fit |
| Description_FAB | Each harness is routed through a split-loom braid for protection and great looks |
| Brand | Holley EFI |
| Category | Air and Fuel Delivery |
| Emission Code | 4 |
| Harness Application | HEMI |
| Harness Type | Main |
| Ignition Type | Not Included |
| Injector Connector | Not Included |
| part type | Fuel Injection Harness |
| Product Type | Hemi Main Engine Harness |
| Sub Category | Wire, Cable and Related Components |
| Warning | California Proposition 65 |
| Brand | Holley EFI |
| Category | Air and Fuel Delivery |
| Emission Code | 4 |
| Harness Application | HEMI |
| Harness Type | Main |
| Ignition Type | Not Included |
| Injector Connector | Not Included |
| part type | Fuel Injection Harness |
| Product Type | Hemi Main Engine Harness |
| Sub Category | Wire, Cable and Related Components |
| Warning | California Proposition 65 |
| Description_INV | HEMI MAIN HARNESS, LATE, W/ TPS & IAC |
| Description_ASC | Note: The TPS and IAC connectors are designed for Holley 4 BBL style throttle bodies. If you are using a different throttle body, you may have to change the pins and connectors. When using the 558-116 Harness you MUST use a Chrysler 514-9230-AA Crank Sensor. This sensor MUST be used when utilizing a 60-2 Ignition Strategy. This sensor is standard on 2009-12 Chrysler/Dodge/Jeep applications and is a direct replacement sensor for 2013+ engines. |
| Description_DES | Gen III HEMI Main Harness Late w/ TPS and Idle Air Control Connections |
| Description_EXT | Gen III HEMI Main Harness w/Throttle Position Sensor & Idle Air Control, For Late Crank & Cam Sensors, for HP EFI & Dominator EFI, For use with Cable Throttle Body. |
| Description_MKT | Gen III HEMI Harness with TPS and Idle Air Control Connections. This wiring harness interfaces a Holley EFI ECU to a Gen III HEMI engine with an aftermarket cable actuated throttle body. It is meant to be used in conjunction with an injector harness, a coil harness, and two ignition modules. Most stock sensors are used with this harness. There are two optional connectors for interfacing with CAN-based Holley modules. |
| Description_FAB | Gen III Hemi Main Harness with IAC motor wiring/connector and TPS wiring/connector |
| Description_FAB | Take control of your Gen III HEMI with Holley EFI by controlling fuel and spark. Great for power upgrades and engine swaps. |
| Description_FAB | Capable of tuning with power adders such as nitrous, superchargers or turbos and compatible with methanol and water injection |
| Description_FAB | Harnesses are available to connect to a Gen III HEMI engine for the most advanced fuel and timing controls available |
| Description_FAB | Each Harness is designed in fit and function specifically for the Gen III HEMI engine platform |
| Description_FAB | All wiring is TXL grade copper wiring with minimal weight, high temp sleeve in a small diameter |
| Description_FAB | Factory style terminations provide a strong, secure connection |
| Description_FAB | Connectors are OEM grade for a correct, positive fit |
| Description_FAB | Each harness is routed through a split-loom braid for protection and great looks |