COMP Cams Engine Valve Spring Kit 26987-16
Specifications:
| Compatible Retainers | 744 Steel Retainers for 7° Locks and 3/8 Valves |
| Compatible Seats | 4704 Spring Seats for OD Locator |
| Compatible shims | 4754 Spring Shims |
| Valve spring finish | Raw |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov |
| Number of Springs | 16 |
| Spring Rate | 391 |
| Seat Pressure | 120 |
| Seat Height | 1.800 |
| Outer Spring Outside Diameter | 1.442 |
| Outer Spring Inside Diameter | 1.150 |
| Inner Spring Inside Diameter | 0.710 |
| Coil Bind Height | 1.130 |
| Damper | Yes |
| C.A.R.B. Exempt for On-Road Vehicles? | Yes |
| C.A.R.B. Exemption Reason | No impact on pollution output of vehicle. |
| C.A.R.B. E.O. Number | N/A |
| Description_SHO | Engine Valve Spring |
| Description_INV | DUAL SPRING W/DAMPER,1.442 OD,1.800 IH |
| Description_KSW | Valve Springs |
| Description_KSW | Dual Valve Springs |
| Description_KSW | Single Valve Springs |
| Description_KSW | Springs |
| Description_KSW | Conical Springs |
| Description_KSW | Valve Lift |
| Description_KSW | Max Lift |
| Description_KSW | Spring Kit |
| Description_DES | DUAL SPRING W/ DAMPER |
| Description_DES | 1.442 OD |
| Description_DES | 1.800 IH |
| Description_DES | .600 LIFT |
| Description_DES | 391 LBS/IN |
| Description_EXT | Designed for flat tappet and hydraulic roller cams |
| Description_EXT | 26987 fits applications near a 1.800" installed height and a spring pocket of 1.442". It has a 391 lbs/in rate and a 355 lbs open load for many street roller or flat tappet applications. |
| Description_MKT | COMP Cams' new 26987 dual valve springs are a product of innovative design and superior craftsmanship. Engineered with state-of-the-art techniques and premium wire |
| Description_MKT | they redefine reliability and consistency in the performance automotive aftermarket. The 26987 is the go-to dual for a wide range of applications |
| Description_MKT | accommodating hydraulic flat tappets and street hydraulic roller cams. They are designed to operate around a 1.800" installed height and can run .575" lift while still being under 350 lbs open load for flat tappet applications or run .610" lift for hydraulic rollers! They easily fit numerous spring pockets with a 1.442" outer diameter |
| Description_MKT | offering versatility across many applications. Boasting an open load of over 350 pounds |
| Description_MKT | these valve springs are geared toward early hydraulic roller street or flat tappet applications |
| Description_MKT | ensuring exceptional performance and durability. Whether you're seeking improved dynamics |
| Description_MKT | enhanced valve control |
| Description_MKT | or unmatched reliability |
| Description_MKT | we have the valve springs to deliver the perfect solution. Elevate your engine's dependability and confidence on the road with COMP Cams valve springs. |
| Description_DEF | Engine Valve Spring Kit |