MSD Universal - Use with Holley or MSD EFI Systems 8289-8
Payments are processed through secure, encrypted payment systems. Your credit card information is transmitted directly to the payment processor and is never stored or accessible by us.
MSD Universal - Use with Holley or MSD EFI Systems 8289-8
Specifications:
| Brand | MSD |
| Category | Ignition |
| 2251 | Smart Coil |
| 17 | Red |
| Emission Code | 3 |
| Inductance (mH) | 5.2 |
| Maximum Voltage | 50,000 |
| part type | Ignition Coil |
| Peak Current (mJ) | 201 |
| 3719 | 0.55 |
| Product Type | Ignition Coil |
| Quantity | 8-pack |
| Sub Category | Ignition Coil |
| Turns Ratio | 2.88 |
| Warning | California Proposition 65 |
| Warranty | Manufacturer's Limited 1 Year Warranty |
| Brand | MSD |
| Category | Ignition |
| 2251 | Smart Coil |
| 17 | Red |
| Emission Code | 3 |
| Inductance (mH) | 5.2 |
| Maximum Voltage | 50,000 |
| part type | Ignition Coil |
| Peak Current (mJ) | 201 |
| 3719 | 0.55 |
| Product Type | Ignition Coil |
| Quantity | 8-pack |
| Sub Category | Ignition Coil |
| Turns Ratio | 2.88 |
| Warning | California Proposition 65 |
| Warranty | Manufacturer's Limited 1 Year Warranty |
| Description_INV | COILS,SMARTCOIL,8PACK,RED |
| Description_ASC | The supplied connectors and pins are "Pull to Seat " This means that you need to insert the wire through the connector from the back, crimp the pin and pull it back into the connector for assembly. Always use proper crimping tools to ensure a proper connection. |
| Description_DES | MSD Ignition Coil - Smart - 8-Pack - Red |
| Description_EXT | Universal - Use with Holley or MSD EFI Systems |
| Description_MKT | Unique elongated mounting holes accommodate IGN-1A mounting brackets or allow it to bolt in place of an LS coil with 72mm bolt spacing. The MSD Smart Coil will bolt right on to Holley LS cast aluminum valve covers for a super clean look. Available in red or black, there's a set ready for your build. |
| Description_MKT | The MSD Smart Coil is a direct replacement for the popular IGN-1A coil. Here's the difference; it produces more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. |
| Description_MKT | It is compatible with Holley EFI and many other aftermarket electronic fuel injection systems and will run on traditional 12 volt or 16 volt electrical systems found in race applications. |
| Description_FAB | Available in red or black to match your build |
| Description_FAB | Built-in ignitor for compatibility with Holley EFI and many other aftermarket ECU’s |
| Description_FAB | Maximum operating voltage of 17 volts – for compatibility with both 12 volt and 16 volt electrical systems found in many performance/race applications |
| Description_FAB | Low current draw means less demand on the electrical and charging system |
| Description_FAB | Elongated mounting holes to allow direct replacement of IGN-1A coils and will bolt in place of factory LS 1/2/3/6/7 coils with 72mm bolt spacing |
| Description_FAB | More spark energy than any other IGN-1A smart coil on the market for maximum fuel burn during combustion sequence |
| Description_FAB | Same wiring pinout as other IGN-1A coils for easy plugin upgrades |
| Description_FAB | Direct bolt-on to Holley cast aluminum LS valve covers with 72mm bolt spacing |
| Description_INV | COILS,SMARTCOIL,8PACK,RED |
| Description_ASC | The supplied connectors and pins are "Pull to Seat " This means that you need to insert the wire through the connector from the back, crimp the pin and pull it back into the connector for assembly. Always use proper crimping tools to ensure a proper connection. |
| Description_DES | MSD Ignition Coil - Smart - 8-Pack - Red |
| Description_EXT | Universal - Use with Holley or MSD EFI Systems |
| Description_MKT | Unique elongated mounting holes accommodate IGN-1A mounting brackets or allow it to bolt in place of an LS coil with 72mm bolt spacing. The MSD Smart Coil will bolt right on to Holley LS cast aluminum valve covers for a super clean look. Available in red or black, there's a set ready for your build. |
| Description_MKT | The MSD Smart Coil is a direct replacement for the popular IGN-1A coil. Here's the difference; it produces more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. |
| Description_MKT | It is compatible with Holley EFI and many other aftermarket electronic fuel injection systems and will run on traditional 12 volt or 16 volt electrical systems found in race applications. |
| Description_FAB | Available in red or black to match your build |
| Description_FAB | Built-in ignitor for compatibility with Holley EFI and many other aftermarket ECU’s |
| Description_FAB | Maximum operating voltage of 17 volts – for compatibility with both 12 volt and 16 volt electrical systems found in many performance/race applications |
| Description_FAB | Low current draw means less demand on the electrical and charging system |
| Description_FAB | Elongated mounting holes to allow direct replacement of IGN-1A coils and will bolt in place of factory LS 1/2/3/6/7 coils with 72mm bolt spacing |
| Description_FAB | More spark energy than any other IGN-1A smart coil on the market for maximum fuel burn during combustion sequence |
| Description_FAB | Same wiring pinout as other IGN-1A coils for easy plugin upgrades |
| Description_FAB | Direct bolt-on to Holley cast aluminum LS valve covers with 72mm bolt spacing |
Shipping Policy
Shipping Policy Last Updated: April 2026
We're committed to getting your order to you as quickly and transparently as possible. Here's everything you need to know about how we ship.
Order Cancellations
Once an order is placed, cancellations are not guaranteed as orders are sent to fulfillment quickly. If you need to cancel, contact us immediately at sales@berryperformancesales.com. If a cancellation is possible, the buyer is responsible for any transaction fees incurred. If the order has already shipped, it cannot be cancelled and must go through our standard return process.
Processing Time
In-stock orders are typically processed and shipped within 1–2 business days of receiving payment, unless otherwise noted on the product page. Orders placed on weekends or holidays will be processed on the next business day.
Shipping Costs
Shipping costs are calculated at checkout based on the shipping method selected, package weight and dimensions, and destination address. You can review all shipping costs before finalizing your purchase.
Estimated Delivery Times
Domestic orders typically arrive within 1–7 business days after shipment, depending on your location and the carrier. Please note that delivery times are estimates and are not guaranteed. Delays due to weather, carrier volume, or other circumstances beyond our control may occur.
Tracking Information
Once your order ships, you will receive a confirmation email with tracking information. Use this to monitor your package's progress. If your tracking has not updated within 48 hours of receiving your confirmation email, please contact us and we'll look into it.
Shipping Address
Please ensure your shipping address is accurate and complete before placing your order. If you realize an error after ordering, contact us immediately at sales@berryperformancesales.com — we will do our best to make the correction, but changes cannot be guaranteed once an order is in fulfillment. We are not responsible for orders shipped to incorrect or undeliverable addresses due to customer error.
Please note: We are unable to ship to P.O. Boxes. Please provide a physical delivery address at checkout.
Lost or Stolen Packages
If your tracking shows your order as delivered but you have not received it, please take the following steps:
- Check around your property and with neighbors
- Confirm the shipping address on your order was correct
- Contact the carrier directly with your tracking number
If the issue remains unresolved, contact us at sales@berryperformancesales.com within 5 business days of the marked delivery date. We will work with you and the carrier to investigate. Berry Performance Sales is not responsible for packages confirmed as delivered by the carrier or for packages stolen after delivery.
Damaged in Transit
If your order arrives visibly damaged, please refer to our Returns & Refunds policy for instructions on how to report the issue. Carrier damage claims must be reported within 48 hours of delivery.
International Shipping
We do ship internationally! Because shipping costs, carrier options, and transit times vary significantly by destination, international orders require a custom quote prior to purchase. To request a shipping quote, contact us at sales@berryperformancesales.com with the following:
- Your country and full delivery address
- The item(s) you are interested in ordering
We will respond with a shipping quote as quickly as possible. Please note that customs duties, import taxes, and any other fees charged upon delivery are the sole responsibility of the recipient and are not included in your shipping quote. We recommend checking with your local customs office before placing your order.
Off-Road Use Disclaimer
All products are sold for off-road use only unless otherwise specified. The buyer assumes full responsibility for installation and operation. Berry Performance Sales is not liable for any incidental, indirect, or consequential damages including engine failure, labor charges, or vehicle downtime resulting from the use of any product sold. By placing an order, you acknowledge and accept these terms.
Questions?
We're happy to help before, during, or after your purchase. Email: sales@berryperformancesales.com
Berry Performance Sales reserves the right to update this policy at any time. Changes take effect immediately upon posting. It is the customer's responsibility to review the current policy at the time of purchase.
Return Policy
Returns & Refunds Last Updated: April 2026
We want you to love what you ordered. If something isn't right, here's everything you need to know.
30-Day Return Window
You have 30 days from the date of purchase to initiate a return. After this window, we are unable to accept returns. We do not offer exchanges — all approved returns are refunded per the terms below.
How to Initiate a Return
To request a return, contact us at sales@berryperformancesales.com with your order number and reason for return. All returns must be approved by our team before any item is shipped back to us. Once your return has been approved, your item must be shipped within 10 days of approval. Items shipped without prior approval or outside this window will be refused and returned to sender.
Return Conditions
To be eligible for a return, items must be:
- Unused and in original condition
- In original packaging
- Inclusive of all parts and accessories
Custom ordered products are non-returnable. If you're unsure whether your item qualifies, contact us before purchasing.
Once we receive your return, we will inspect the item before processing any refund. We reserve the right to deny or adjust your refund if the item is received in a condition that differs from what was originally shipped — including signs of use, missing parts, or damage that occurred after delivery.
Fees to Know Upfront
We believe in being transparent about costs:
- Restocking Fee: 20% — deducted from all return refunds
- Return Shipping: Buyer's responsibility on all standard returns
- Cancellation (Installment/Payment Plan): 7% fee to cover transaction costs
- Cancellation (Credit Card/PayPal): 3.5% processing fee
Damaged or Defective Items
If your order arrives damaged or defective, you must contact us within 48 hours of delivery at sales@berryperformancesales.com. Claims reported outside this window may not be eligible for resolution.
When contacting us, please include:
- Your order number
- A description of the issue
- Clear photos or video of the damage or defect
If your item was damaged during shipping, this is handled as a carrier claim separate from our standard return process — we will assist you in filing that claim. Items confirmed to be defective due to a manufacturing or fulfillment error will have return shipping costs covered by Berry Performance Sales.
Refunds
Once we receive and inspect your return, refunds are processed within 3–5 business days back to your original payment method. You'll receive a confirmation once it's been issued.
Questions?
We're happy to help before, during, or after your purchase. Email: sales@berryperformancesales.com
Berry Performance Sales reserves the right to update this policy at any time. Changes take effect immediately upon posting. It is the customer's responsibility to review the current policy at the time of purchase.
Disclaimer
All products are sold for off-road use only unless otherwise specified. Buyer assumes all responsibility for installation and operation. Seller is not liable for any incidental, indirect, or consequential damages — including engine failure, labor costs, or vehicle downtime — resulting from the use of any product sold.
By making a purchase from Berry Performance Sales, you acknowledge and agree to abide by the terms and conditions of these Policies.
For any questions or concerns, please contact us — we’re always happy to help.