Design Engineering One 7 inch by 24 inch Versa Shied. 10908
Specifications:
| Length | 24 |
| Width | 7 |
| Material | Fabric/Aluminized |
| Color | Silver |
| Radiant Heat Resistance | 2000°F |
| Max Temperature Rating | 500 Degree |
| Direct Heat Resistance | 500°F |
| Title | DEI 10908 Versa Shield Starter Shield 010908 |
| A/N Size | N/A |
| Includes | One 7 inch by 24 inch Versa Shied. |
| Prop 65 - Short label | WARNING: Cancer and Reproductive Harm - www.p65warnings.cs.gov |
| Prop 65 - Long label | WARNING: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov |
| Prop 65 Yes/No | Yes |
| Description_ASC | Versa-Shield was designed to protect starters from potential failure caused by under hood heat soak conditions. Constructed using an aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier, Versa-Shield is capable of reflecting radiant heat up to 2000F. Simply wrap desired component with Versa-Shield and trim excess material. Edges attach to itself using a hook & loop edge closure design. In most cases there is no need to remove component when installing Versa-Shield. |
| Description_DEF | Exhaust Heat Shield |
| Description_DES | Versa Shield 7in x 24in |
| Description_EXT | One 7 inch by 24 inch Versa Shied. |
| Description_FAB | Withstands 500 Degrees F Of Direct Heat/2000 Degrees Radiant |
| Description_FAB | Edges Attach To Itself With Hook And Loop Closure Design |
| Description_FAB | Universal-Trim Length To Size |
| Description_FAB | Can Easily Be Removed For Shows |
| Description_FAB | No Need To Remove Starter For Installation In Most Cases |
| Description_FAB | Protect Master Cylinders/Cool Cans/Distributor /Fuel Pumps |
| Description_FAB | 7 in. Wide x 24 in. Long |
| Description_INV | Versa Shield Starter Shield |
| Description_KSW | 14150 |
| Description_KSW | heat |
| Description_KSW | shield |
| Description_KSW | velcro |
| Description_KSW | starter |
| Description_KSW | 10402 |
| Description_KSW | 010402 |
| Description_KSW | 10908 |
| Description_KSW | 010908 |
| Description_KSW | Versa Shield |
| Description_KSW | Starter Shield |
| Description_KSW | Starter Heat Shield |
| Description_KSW | versa |
| Description_LAB | Versa Shield(TM) Starter Shield |
| Description_MKT | Versa-Shield was designed to protect starters from potential failure caused by under hood heat soak conditions. Constructed using an aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier, Versa-Shield is capable of reflecting radiant heat up to 2000F. Simply wrap desired component with Versa-Shield and trim excess material. Edges attach to itself using a hook & loop edge closure design. In most cases there is no need to remove component when installing Versa-Shield. |
| Description_SHO | Heat Shield |