Design Engineering One 12 inch by 12 inch sheet of Reflect-A-Cool. 10460
Specifications:
| Thickness | .125 |
| Length | 12 |
| Width | 12 |
| Resistant To | Heat |
| Material | Reflect-A-Cool |
| Color | Silver |
| Application Method | Stick |
| Fiber Reinforced | Yes |
| Radiant Heat Resistance | 2000°F |
| Direct Heat Resistance | 400°F |
| Backing | Adhesive |
| Title | DEI 10460 Reflect-A-Cool 12" x 12" 010460 |
| Includes | One 12 inch by 12 inch sheet of Reflect-A-Cool. |
| Prop 65 - Short label | WARNING: Cancer and Reproductive Harm - www.p65warnings.cs.gov |
| Prop 65 - Long label | WARNING: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov |
| Prop 65 Yes/No | Yes |
| Description_ASC | Reflect-A-Cool(TM) solves the problem of heat intrusion into interiors and components. Reflect-A-Cool(TM), constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a race car where typical mechanical fasteners cannot be used and has many industrial uses. Reflect-A-Cool(TM) can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It's that easy. Protect wires, cables, hoses, pipes & tubing from radiant heat sources Radiant heat protection up to 2000F Self-adhesive backing with release liner for easy installation Moisture & solvent resistant Virtually NO clearance needed Light weight and flexible-Trim to size 0.0065 in. thick Easy to apply, won't lift off DO NOT apply directly to exhaust components. |
| Description_DEF | Heat Reflective Tape |
| Description_DES | Reflect-A-Cool 12in x 12in |
| Description_EXT | One 12 inch by 12 inch sheet of Reflect-A-Cool. |
| Description_FAB | Radiant Heat Protection Up To 2000 Degrees F |
| Description_FAB | Self-Adhesive Backing With Release Liner For Easy Installation |
| Description_FAB | Moisture And Solvent Resistant |
| Description_FAB | Virtually NO Clearance Needed |
| Description_FAB | Light Weight And Flexible-Trim To Size |
| Description_FAB | 0.0065 in. Thick |
| Description_FAB | Easy To Apply- Wont Lift Off |
| Description_FAB | 12 in. x 12 in. Sheet |
| Description_INV | Reflect-A-Cool 12x12 |
| Description_KSW | 10460 |
| Description_KSW | adhesive |
| Description_KSW | reflective |
| Description_KSW | silver |
| Description_KSW | aluminum |
| Description_KSW | 010460 |
| Description_KSW | reflect-a-cool |
| Description_KSW | heat |
| Description_KSW | shield |
| Description_KSW | tape |
| Description_KSW | sheet |
| Description_KSW | 010460 |
| Description_KSW | sheets |
| Description_KSW | adhesive |
| Description_KSW | reflective |
| Description_KSW | silver |
| Description_KSW | aluminum |
| Description_KSW | 010460 |
| Description_KSW | reflect-a-cool |
| Description_KSW | heat |
| Description_KSW | shield |
| Description_KSW | tape |
| Description_KSW | sheet |
| Description_KSW | sheets |
| Description_LAB | Reflect-A-Cool(TM) - 12" x 12" |
| Description_MKT | Reflect-A-Cool(TM) solves the problem of heat intrusion into interiors and components. Reflect-A-Cool(TM), constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a race car where typical mechanical fasteners cannot be used and has many industrial uses. Reflect-A-Cool(TM) can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It's that easy. Protect wires, cables, hoses, pipes & tubing from radiant heat sources Radiant heat protection up to 2000F Self-adhesive backing with release liner for easy installation Moisture & solvent resistant Virtually NO clearance needed Light weight and flexible-Trim to size 0.0065 in. thick Easy to apply, won't lift off DO NOT apply directly to exhaust components. |
| Description_SHO | Heat Reflective Tape |