Design Engineering One 10 inch by 10 inch sheet of Floor & Tunnel. 95503

Floor & Tunnel Shield II(TM) solves the problem of needing a high heat barrier to block heat from any source intruding into interiors and damaging components and electronics. Use as a barrier to reflect and insulate from any heat source. Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor annd Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. Constructed with an embossed 10 mil aluminum face bonded to 1/8 in. composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor and Tunnel Shield II withstands up to 1750F. The adhesive side holds past 450F. Its improved multifaceted modern aluminum surface offers improved reflection and rigidity and allows for ease of installation - aluminum side must face the heat source. At only 3/16 in. thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor and Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound. Floor and Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. 10 mil dimpled aluminum face Protection for engine compartments Protection for painted body parts Comfortable interior at any temperature Hi-temp adhesive for a do-it-once install Extreme heat barrier - aluminum side should face the heat Only 3/16 in. thick Use as barrier to reflect and insulate from any heat source Great for exterior applications DO NOT apply directly to exhaust components.

Design Engineering One 10 inch by 10 inch sheet of Floor & Tunnel. 95503

Specifications:

Length	10
Width	10
Grade Type	Performance
Color	Silver
Universal Or Specific Fit	Specific
Adhesive	Yes
Direct Heat Resistance	1750°F
Backing	Adhesive
Title	DEI 95503 Floor & Tunnel Shield II 10" x 10" 050503-16
Includes	One 10 inch by 10 inch sheet of Floor & Tunnel.
Prop 65 - Short label	WARNING: Cancer and Reproductive Harm - www.p65warnings.cs.gov
Prop 65 - Long label	WARNING: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Prop 65 Yes/No	Yes
Description_ASC	Floor & Tunnel Shield II(TM) solves the problem of needing a high heat barrier to block heat from any source intruding into interiors and damaging components and electronics. Use as a barrier to reflect and insulate from any heat source. Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor annd Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. Constructed with an embossed 10 mil aluminum face bonded to 1/8 in. composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor and Tunnel Shield II withstands up to 1750F. The adhesive side holds past 450F. Its improved multifaceted modern aluminum surface offers improved reflection and rigidity and allows for ease of installation - aluminum side must face the heat source. At only 3/16 in. thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor and Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound. Floor and Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. 10 mil dimpled aluminum face Protection for engine compartments Protection for painted body parts Comfortable interior at any temperature Hi-temp adhesive for a do-it-once install Extreme heat barrier - aluminum side should face the heat Only 3/16 in. thick Use as barrier to reflect and insulate from any heat source Great for exterior applications DO NOT apply directly to exhaust components.
Description_DEF	Sound Dampening Sheet
Description_DES	Floor & Tunnel Shield II 10in x 10in
Description_EXT	One 10 inch by 10 inch sheet of Floor & Tunnel.
Description_FAB	Ideal For Firewalls/Under Vehicle/Floor Pans/Oil Tank Box/etc.
Description_FAB	Just Trim Peel And Stick
Description_FAB	10 in x 10 in / 0.83 sq ft
Description_FAB	Peel and stick adhesive backing
Description_FAB	Blocks Radiant Heat From Entering Driver Compartment
Description_FAB	Withstands Direct High Temperatures Up To 1750Degrees
Description_FAB	Serves As A Barrier To Unwanted Road/Tire And Engine Noise
Description_FAB	Constructed From 10 Mil Aluminum
Description_FAB	Easy To Form To Shapes And Contours
Description_FAB	Aggressive Self-Adhesive Backing Holds Past 450 Degrees F
Description_FAB	Adheres To Almost Any Surface/Material/Fiberglass
Description_FAB	Minimum Clearance Required Only 3/16 in. Thick
Description_INV	Floor & Tunnel Shield II 10x10
Description_KSW	95503
Description_KSW	050503-16
Description_KSW	050503-16
Description_KSW	floor
Description_KSW	tunnel
Description_KSW	shield
Description_KSW	extreme
Description_KSW	heat
Description_LAB	Floor & Tunnel Shield II(TM) - 10" x 10"
Description_MKT	Floor & Tunnel Shield II(TM) solves the problem of needing a high heat barrier to block heat from any source intruding into interiors and damaging components and electronics. Use as a barrier to reflect and insulate from any heat source. Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor annd Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. Constructed with an embossed 10 mil aluminum face bonded to 1/8 in. composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor and Tunnel Shield II withstands up to 1750F. The adhesive side holds past 450F. Its improved multifaceted modern aluminum surface offers improved reflection and rigidity and allows for ease of installation - aluminum side must face the heat source. At only 3/16 in. thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor and Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound. Floor and Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. 10 mil dimpled aluminum face Protection for engine compartments Protection for painted body parts Comfortable interior at any temperature Hi-temp adhesive for a do-it-once install Extreme heat barrier - aluminum side should face the heat Only 3/16 in. thick Use as barrier to reflect and insulate from any heat source Great for exterior applications DO NOT apply directly to exhaust components.
Description_SHO	SoundDampMaterial