Product help request
Notify Me When Available
BMR Suspension Sway Bar Kit, Rear, Hollow 29mm, Adjustable, Stamped Steel Bracket SB345H
Regular Price
$279.95
The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB345 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 29mm DOM tubing, the SB345 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB345 attaches to your 1982-2002 F-Body with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The fabricated laser cut, TIG-welded steel sway bar end links are reinforced to minimize deflection. BMR Suspension designed the SB345 sway bar for street performance, drag race, and road race applications. The large adjustable sway bar has two positions, giving you the versatility to drive to and from the track and still out handle the competition with the same sway bar. The SB345 gives you a 290%-394% increase in rate over the stock bar. These rate increases and adjustability allow you to fine-tune the handling characteristics of the suspension so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength without adding a lot of weight. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension! BMR Suspensions SB345 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!
BMR Suspension Sway Bar Kit, Rear, Hollow 29mm, Adjustable, Stamped Steel Bracket SB345H
Specifications:
| Description_ASC | [B@15ce8dcf |
| Description_DEF | [B@53bd51ca |
| Description_DES | [B@c2b1b57 |
| Description_EXT | [B@6d68da83 |
| Description_INV | [B@ca99214 |
| Description_MKT | [B@3523b14a |
| Description_SHO | [B@6186e51a |
| Mounting Hardware Included | Yes |
| Position | Rear |
| Quantity | Sold as a kit |
| Rear Sway Bar Adjustable | Adjustable |
| Rear Sway Bar Diameter (in) | 1.125 inches |
| Rear Sway Bar Diameter (mm) | 29.0 mm |
| Rear Sway Bar Type | Hollow |
| Sway Bar Finish | Black hammertone powdercoated |
| Sway Bar Material | Steel |
