The PDR-2 is a high-power solenoid actuator built to release stubborn door or trunk latches. It delivers 35 lbs of pulling force over 3/4 in of travel and mounts vertically or horizontally in nearly any location. The kit ships with a relay and a heavy-duty, water-resistant switch so the high-current solenoid can be triggered by a lower-current switch or a remote entry system.
Specifications:
- Function: door / trunk / power lock solenoid actuator
- Pull force: 35 lbs
- Travel: 3/4 in (0.750 in)
- Housing material: plastic
- Housing color: black
- Included hardware: 30A relay, heavy-duty water-resistant switch (rated 40A), 18 in cable with crimp fittings, fuse holder with 30A fuse, mounting bolts and lock-nuts, wiring connectors
- Mounting: universal, vertical or horizontal orientation
- Part Number: PDR-2
The white activation wire should only be switched to 12 volts briefly; leaving it powered continuously can burn out the solenoid.
FAQ
How much pulling force does the Dakota Digital PDR-2 provide?
35 lbs of pull over 3/4 in of travel, enough to release most door and trunk latches.
What is included with the PDR-2 actuator?
The solenoid, a 30A relay, a heavy-duty water-resistant switch, an 18 in cable with crimp fittings, a fuse holder with 30A fuse, and universal mounting hardware.
Can the PDR-2 be mounted in any orientation?
Yes, it can be mounted vertically or horizontally as long as the plunger pulls in a straight line.
How is the PDR-2 activated?
By grounding the black wire and momentarily switching the white wire to 12 volts. The white wire should not stay powered for more than a few seconds.
