{"product_id":"mishimoto-25mm-wheel-spacers-6x139-7-black-bnws-001-250bk","title":"Mishimoto Wheel Spacers, 25mm, 6x139.7, 93.1mm Bore, M12 x 1.5, Black — 2022+ Ford Bronco \u0026 2019-2022 Ranger | BNWS-001-250BK","description":"\u003cp\u003eMishimoto BNWS-001-250BK is a pair of 25mm hub-centric wheel spacers from the Borne Off-Road line for vehicles with a 6x139.7 bolt pattern, 93.1mm center bore and M12 x 1.5 studs, including the Ford Bronco and Ford Ranger. Each spacer is forged from 6061-T6 aluminum with a black anodized finish for corrosion protection and has grade-12.9 steel studs pre-installed. The hub-centric design acts as a direct extension of the axle hub for accurate wheel fitment and reduced load on the hardware. Spacers like these add track width and can create brake clearance or prevent tire rub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold in pairs.\u003c\/li\u003e\n\u003cli\u003eMeasure the vehicle to confirm thread pattern, center bore and thickness before ordering. Fitment with aftermarket wheels must be confirmed by the buyer before ordering.\u003c\/li\u003e\n\u003cli\u003eStock wheel studs must not touch the back of the wheel once the spacers are installed. Trimming the stock studs may be required for clearance.\u003c\/li\u003e\n\u003cli\u003eWheel lug nuts must engage the studs for 7 full turns. If the lug nuts cannot be turned 7 or more times before reaching full torque, do not use the spacers.\u003c\/li\u003e\n\u003cli\u003eRemove corrosion from the hub before installation, since excessive corrosion can keep the spacer from fully seating.\u003c\/li\u003e\n\u003cli\u003eAn alignment is recommended after installation because track width changes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e(2) Aluminum Wheel Spacers\u003c\/li\u003e\n\u003cli\u003e(12) M12 X 1.5 Wheel Nuts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Mishimoto\u003c\/li\u003e\n\u003cli\u003ePart Number: BNWS-001-250BK\u003c\/li\u003e\n\u003cli\u003eThickness: 25mm\u003c\/li\u003e\n\u003cli\u003eBolt Pattern: 6x139.7\u003c\/li\u003e\n\u003cli\u003eCenter Bore: 93.1mm\u003c\/li\u003e\n\u003cli\u003eStud Thread: M12 x 1.5\u003c\/li\u003e\n\u003cli\u003eMaterial: 6061-T6 aluminum\u003c\/li\u003e\n\u003cli\u003eStuds: Grade-12.9 steel\u003c\/li\u003e\n\u003cli\u003eDesign: Hub-centric\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eQuantity: Pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2022 Ford Bronco I4 (2.3)\u003c\/li\u003e\n\u003cli\u003e2022 Ford Bronco V6 (2.7)\u003c\/li\u003e\n\u003cli\u003e2019 Ford Ranger I4 (2.3)\u003c\/li\u003e\n\u003cli\u003e2020 Ford Ranger I4 (2.3)\u003c\/li\u003e\n\u003cli\u003e2021 Ford Ranger I4 (2.3)\u003c\/li\u003e\n\u003cli\u003e2022 Ford Ranger I4 (2.3)\u003c\/li\u003e\n\u003cli\u003e2019 Ford Ranger I4 (2.5)\u003c\/li\u003e\n\u003cli\u003e2020 Ford Ranger I4 (2.5)\u003c\/li\u003e\n\u003cli\u003e2021 Ford Ranger I4 (2.5)\u003c\/li\u003e\n\u003cli\u003e2019 Ford Ranger I5 (3.2)\u003c\/li\u003e\n\u003cli\u003e2020 Ford Ranger I5 (3.2)\u003c\/li\u003e\n\u003cli\u003e2021 Ford Ranger I5 (3.2)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMishimoto fitment covers the Ford Bronco 2.3L and 2.7L from 2022 onward in its application table, while its product summary gives 2021 and later. Confirm the 6x139.7 bolt pattern, 93.1mm center bore and M12 x 1.5 studs on the vehicle before ordering.\u003c\/p\u003e\u003cp\u003eFitment is from Mishimoto fitment data for this part number. Confirm year, model and engine before ordering.\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhich vehicles do the Mishimoto BNWS-001-250BK wheel spacers fit?\u003c\/h5\u003e\u003cp\u003eThey fit 2022 and later Ford Bronco 2.3L I4 and 2.7L V6 models, 2019-2022 Ford Ranger 2.3L I4 models, and 2019-2021 Ranger 2.5L I4 and 3.2L I5 versions. They also fit other vehicles with a 6x139.7 bolt pattern, M12 x 1.5 studs and a 93.1mm center bore.\u003c\/p\u003e\u003ch5\u003eWhat is included with the Mishimoto BNWS-001-250BK?\u003c\/h5\u003e\u003cp\u003eThe kit includes two aluminum wheel spacers with pre-installed studs and twelve M12 x 1.5 wheel nuts.\u003c\/p\u003e\u003ch5\u003eDo the stock wheel studs need to be trimmed for the Mishimoto BNWS-001-250BK?\u003c\/h5\u003e\u003cp\u003eThey may. The stock studs must not touch the back of the wheel with the spacers installed, and trimming them may be required for clearance.\u003c\/p\u003e\u003ch5\u003eHow far must the lug nuts thread onto the Mishimoto BNWS-001-250BK studs?\u003c\/h5\u003e\u003cp\u003eThe wheel lug nuts must engage the studs for 7 full turns. If they cannot be turned 7 or more times before reaching full torque, the spacers should not be used.\u003c\/p\u003e\u003ch5\u003eIs an alignment needed after installing the Mishimoto BNWS-001-250BK?\u003c\/h5\u003e\u003cp\u003eAn alignment is recommended after installation because the spacers change the track width.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Which vehicles do the Mishimoto BNWS-001-250BK wheel spacers fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They fit 2022 and later Ford Bronco 2.3L I4 and 2.7L V6 models, 2019-2022 Ford Ranger 2.3L I4 models, and 2019-2021 Ranger 2.5L I4 and 3.2L I5 versions. They also fit other vehicles with a 6x139.7 bolt pattern, M12 x 1.5 studs and a 93.1mm center bore.\"}}, {\"@type\": \"Question\", \"name\": \"What is included with the Mishimoto BNWS-001-250BK?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The kit includes two aluminum wheel spacers with pre-installed studs and twelve M12 x 1.5 wheel nuts.\"}}, {\"@type\": \"Question\", \"name\": \"Do the stock wheel studs need to be trimmed for the Mishimoto BNWS-001-250BK?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They may. The stock studs must not touch the back of the wheel with the spacers installed, and trimming them may be required for clearance.\"}}, {\"@type\": \"Question\", \"name\": \"How far must the lug nuts thread onto the Mishimoto BNWS-001-250BK studs?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The wheel lug nuts must engage the studs for 7 full turns. If they cannot be turned 7 or more times before reaching full torque, the spacers should not be used.\"}}, {\"@type\": \"Question\", \"name\": \"Is an alignment needed after installing the Mishimoto BNWS-001-250BK?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"An alignment is recommended after installation because the spacers change the track width.\"}}]}\u003c\/script\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":50916696719408,"sku":"MISBNWS-001-250BK","price":148.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/62af5aa1a4f6614c35b46585983cc3f3L_b92b8a99-adde-44a3-a4d3-2d4ba2c9a3de.jpg?v=1793304154","url":"https:\/\/berryperformancesales.com\/products\/mishimoto-25mm-wheel-spacers-6x139-7-black-bnws-001-250bk","provider":"Berry Performance Sales","version":"1.0","type":"link"}