{"title":"QA1","description":"\u003cp\u003eQA1 suspension and chassis parts, including shock absorbers, coilovers, coil springs, control arms, rod end bearings and tie rods for street, strip and circle track builds. Check each listing for fitment and spring rates.\u003c\/p\u003e","products":[{"product_id":"qa1-high-travel-coil-over-spring-qap10ht200","title":"QA1 High Travel Coil-Over Spring | 2.5in ID, 10in, 200 lb\/in, Silver | 10HT200","description":"\u003cp\u003eThe QA1 High Travel Coil Spring is a 2-1\/2 inch inner diameter coil-over spring with a 10 inch free length and a 200 lb\/in spring rate. It is wound from high-tensile chrome silicon alloy wire, which allows fewer coils and a smaller wire diameter, so the spring is lighter and travels farther while reducing unsprung weight and reacting faster. Both ends are squared and ground for straight, consistent operation, and each spring is marked with its free length and rate. The spring can be compressed to coil bind without affecting rate or free height, and it is backed by a lifetime guarantee to stay within 2 percent of its original rate and free height under normal use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: high travel coil-over spring\u003c\/li\u003e\n\u003cli\u003eInner diameter: 2-1\/2 in\u003c\/li\u003e\n\u003cli\u003eFree length: 10 in\u003c\/li\u003e\n\u003cli\u003eSpring rate: 200 lb\/in\u003c\/li\u003e\n\u003cli\u003eMaterial: chrome silicon alloy spring wire\u003c\/li\u003e\n\u003cli\u003eFinish: silver powder coat\u003c\/li\u003e\n\u003cli\u003eEnds: squared and ground\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee within 2% of original rate and free height\u003c\/li\u003e\n\u003cli\u003ePart number: 10HT200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat size is the QA1 10HT200 spring?\u003c\/h5\u003e\u003cp\u003eIt has a 2-1\/2 inch inner diameter, a 10 inch free length, and a 200 lb\/in spring rate.\u003c\/p\u003e\u003ch5\u003eWhat is the spring made from?\u003c\/h5\u003e\u003cp\u003eIt is wound from high-tensile chrome silicon alloy spring wire and finished in silver powder coat.\u003c\/p\u003e\u003ch5\u003eCan the spring be compressed to coil bind?\u003c\/h5\u003e\u003cp\u003eYes. The design allows it to be compressed to coil bind without affecting the spring rate or free height.\u003c\/p\u003e\u003ch5\u003eIs the QA1 10HT200 spring guaranteed?\u003c\/h5\u003e\u003cp\u003eYes. It carries a lifetime guarantee to remain within 2 percent of its original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What size is the QA1 10HT200 spring?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It has a 2-1\/2 inch inner diameter, a 10 inch free length, and a 200 lb\/in spring rate.\"}}, {\"@type\": \"Question\", \"name\": \"What is the spring made from?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is wound from high-tensile chrome silicon alloy spring wire and finished in silver powder coat.\"}}, {\"@type\": \"Question\", \"name\": \"Can the spring be compressed to coil bind?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The design allows it to be compressed to coil bind without affecting the spring rate or free height.\"}}, {\"@type\": \"Question\", \"name\": \"Is the QA1 10HT200 spring guaranteed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It carries a lifetime guarantee to remain within 2 percent of its original free height and rate under normal operating conditions.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846052651056,"sku":"QAP10HT200","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/649a25a63d337fcf3c5c739b298dd58e_f0d0fdcf-f47c-4fc7-8ffb-f58d041cf94a.jpg?v=1739510342"},{"product_id":"qa1-high-travel-coil-over-spring-qap10ht200b","title":"QA1 High Travel Coil-Over Spring | 2.5in ID, 10in, 200 lb\/in, Black | 10HT200B","description":"\u003cp\u003eThe QA1 high travel coil-over spring is a 2-1\/2 inch inner diameter spring with a 10 inch free length and a 200 lb\/in spring rate. It is wound from high-tensile chrome silicon alloy wire, which allows fewer coils and a smaller wire diameter, so the spring is lighter and travels farther while reducing unsprung weight and reacting faster. Both ends are squared and ground for straight, consistent operation, and each spring is marked with its free length and rate. The spring can be compressed to coil bind without affecting rate or free height, and it is backed by a lifetime guarantee to stay within 2 percent of its original rate and free height under normal use. It is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: high travel coil-over spring\u003c\/li\u003e\n\u003cli\u003eInner diameter: 2-1\/2 in\u003c\/li\u003e\n\u003cli\u003eFree length: 10 in\u003c\/li\u003e\n\u003cli\u003eSpring rate: 200 lb\/in\u003c\/li\u003e\n\u003cli\u003eMaterial: high-tensile chrome silicon alloy spring wire\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coat\u003c\/li\u003e\n\u003cli\u003eEnds: squared and ground\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee within 2% of original rate and free height\u003c\/li\u003e\n\u003cli\u003ePart number: 10HT200B\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat size is the QA1 10HT200B spring?\u003c\/h5\u003e\u003cp\u003eIt has a 2-1\/2 inch inner diameter, a 10 inch free length, and a 200 lb\/in spring rate.\u003c\/p\u003e\u003ch5\u003eWhat is the spring made from?\u003c\/h5\u003e\u003cp\u003eIt is wound from high-tensile chrome silicon alloy spring wire and finished in black powder coat.\u003c\/p\u003e\u003ch5\u003eCan the spring be compressed to coil bind?\u003c\/h5\u003e\u003cp\u003eYes. The design allows it to be compressed to coil bind without affecting the spring rate or free height.\u003c\/p\u003e\u003ch5\u003eIs the QA1 10HT200B spring guaranteed?\u003c\/h5\u003e\u003cp\u003eYes. It carries a lifetime guarantee to remain within 2 percent of its original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What size is the QA1 10HT200B spring?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It has a 2-1\/2 inch inner diameter, a 10 inch free length, and a 200 lb\/in spring rate.\"}}, {\"@type\": \"Question\", \"name\": \"What is the spring made from?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is wound from high-tensile chrome silicon alloy spring wire and finished in black powder coat.\"}}, {\"@type\": \"Question\", \"name\": \"Can the spring be compressed to coil bind?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The design allows it to be compressed to coil bind without affecting the spring rate or free height.\"}}, {\"@type\": \"Question\", \"name\": \"Is the QA1 10HT200B spring guaranteed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It carries a lifetime guarantee to remain within 2 percent of its original free height and rate under normal operating conditions.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846052716592,"sku":"QAP10HT200B","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/48a02bfc5e921073d3244e392feae437_4252af4a-0cbe-493f-9839-d1fc243083e3.jpg?v=1739510343"},{"product_id":"qa1-high-travel-coil-over-spring-qap10ht450","title":"QA1 High Travel Coil-Over Spring | 2.5in ID, 10in, 450 lb\/in, Silver | 10HT450","description":"\u003cp\u003eThe QA1 high travel coil-over spring is a 2-1\/2 inch inner diameter spring with a 10 inch free length and a 450 lb\/in spring rate. It is wound from high-tensile chrome silicon alloy wire, which allows fewer coils and a smaller wire diameter, so the spring is lighter and travels farther while reducing unsprung weight and reacting faster. Both ends are squared and ground for straight, consistent operation, and each spring is marked with its free length and rate. The spring can be compressed to coil bind without affecting rate or free height, and it is backed by a lifetime guarantee to stay within 2 percent of its original rate and free height under normal use. It is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: high travel coil-over spring\u003c\/li\u003e\n\u003cli\u003eInner diameter: 2-1\/2 in\u003c\/li\u003e\n\u003cli\u003eFree length: 10 in\u003c\/li\u003e\n\u003cli\u003eSpring rate: 450 lb\/in\u003c\/li\u003e\n\u003cli\u003eMaterial: high-tensile chrome silicon alloy spring wire\u003c\/li\u003e\n\u003cli\u003eFinish: silver powder coat\u003c\/li\u003e\n\u003cli\u003eEnds: squared and ground\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee within 2% of original rate and free height\u003c\/li\u003e\n\u003cli\u003ePart number: 10HT450\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat size is the QA1 10HT450 spring?\u003c\/h5\u003e\u003cp\u003eIt has a 2-1\/2 inch inner diameter, a 10 inch free length, and a 450 lb\/in spring rate.\u003c\/p\u003e\u003ch5\u003eWhat is the spring made from?\u003c\/h5\u003e\u003cp\u003eIt is wound from high-tensile chrome silicon alloy spring wire and finished in silver powder coat.\u003c\/p\u003e\u003ch5\u003eCan the spring be compressed to coil bind?\u003c\/h5\u003e\u003cp\u003eYes. The design allows it to be compressed to coil bind without affecting the spring rate or free height.\u003c\/p\u003e\u003ch5\u003eIs the QA1 10HT450 spring guaranteed?\u003c\/h5\u003e\u003cp\u003eYes. It carries a lifetime guarantee to remain within 2 percent of its original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What size is the QA1 10HT450 spring?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It has a 2-1\/2 inch inner diameter, a 10 inch free length, and a 450 lb\/in spring rate.\"}}, {\"@type\": \"Question\", \"name\": \"What is the spring made from?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is wound from high-tensile chrome silicon alloy spring wire and finished in silver powder coat.\"}}, {\"@type\": \"Question\", \"name\": \"Can the spring be compressed to coil bind?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The design allows it to be compressed to coil bind without affecting the spring rate or free height.\"}}, {\"@type\": \"Question\", \"name\": \"Is the QA1 10HT450 spring guaranteed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It carries a lifetime guarantee to remain within 2 percent of its original free height and rate under normal operating conditions.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846053273648,"sku":"QAP10HT450","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/649a25a63d337fcf3c5c739b298dd58e_55ddf5ae-7ab4-418f-9b52-b08a135c003e.jpg?v=1739510350"},{"product_id":"qa1-high-travel-coil-over-spring-qap12ht110","title":"QA1 High Travel Coil-Over Spring | 2.5in ID, 12in, 110 lb\/in, Silver | 12HT110","description":"\u003cp\u003eThe QA1 high travel coil-over spring is a 2-1\/2 inch inner diameter spring with a 12 inch free length and a 110 lb\/in spring rate. It is wound from high-tensile chrome silicon alloy wire, which allows fewer coils and a smaller wire diameter, so the spring is lighter and travels farther while reducing unsprung weight and reacting faster. Both ends are squared and ground for straight, consistent operation, and each spring is marked with its free length and rate. The spring can be compressed to coil bind without affecting rate or free height, and it is backed by a lifetime guarantee to stay within 2 percent of its original rate and free height under normal use. It is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: high travel coil-over spring\u003c\/li\u003e\n\u003cli\u003eInner diameter: 2-1\/2 in\u003c\/li\u003e\n\u003cli\u003eFree length: 12 in\u003c\/li\u003e\n\u003cli\u003eSpring rate: 110 lb\/in\u003c\/li\u003e\n\u003cli\u003eMaterial: high-tensile chrome silicon alloy spring wire\u003c\/li\u003e\n\u003cli\u003eFinish: silver powder coat\u003c\/li\u003e\n\u003cli\u003eEnds: squared and ground\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee within 2% of original rate and free height\u003c\/li\u003e\n\u003cli\u003ePart number: 12HT110\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat size is the QA1 12HT110 spring?\u003c\/h5\u003e\u003cp\u003eIt has a 2-1\/2 inch inner diameter, a 12 inch free length, and a 110 lb\/in spring rate.\u003c\/p\u003e\u003ch5\u003eWhat is the spring made from?\u003c\/h5\u003e\u003cp\u003eIt is wound from high-tensile chrome silicon alloy spring wire and finished in silver powder coat.\u003c\/p\u003e\u003ch5\u003eCan the spring be compressed to coil bind?\u003c\/h5\u003e\u003cp\u003eYes. The design allows it to be compressed to coil bind without affecting the spring rate or free height.\u003c\/p\u003e\u003ch5\u003eIs the QA1 12HT110 spring guaranteed?\u003c\/h5\u003e\u003cp\u003eYes. It carries a lifetime guarantee to remain within 2 percent of its original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What size is the QA1 12HT110 spring?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It has a 2-1\/2 inch inner diameter, a 12 inch free length, and a 110 lb\/in spring rate.\"}}, {\"@type\": \"Question\", \"name\": \"What is the spring made from?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is wound from high-tensile chrome silicon alloy spring wire and finished in silver powder coat.\"}}, {\"@type\": \"Question\", \"name\": \"Can the spring be compressed to coil bind?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The design allows it to be compressed to coil bind without affecting the spring rate or free height.\"}}, {\"@type\": \"Question\", \"name\": \"Is the QA1 12HT110 spring guaranteed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It carries a lifetime guarantee to remain within 2 percent of its original free height and rate under normal operating conditions.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846053404720,"sku":"QAP12HT110","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/776fe118ff580038cad6474a5202b136.jpg?v=1739510352"},{"product_id":"qa1-high-travel-coil-over-spring-qap12ht130","title":"QA1 High Travel Coil-Over Spring | 2-1\/2in ID, 12in, 130 lbs\/in, Silver Powder Coated | 12HT130","description":"\u003cp\u003eQA1 high travel coil-over springs are wound from specially designed high-tensile chrome silicon alloy spring wire, which allows fewer coils and a smaller wire diameter. The result is a lighter spring with increased travel from the larger gap between coils, reducing unsprung weight and reacting faster for improved suspension response. Careful heat-treating and post-processing extend fatigue life, and the coil design lets the spring compress to coil-bind without affecting spring rate or free height. This spring is ground at both ends for straight, consistent operation, finished in silver powder coat, and made in the USA. All QA1 springs carry a lifetime guarantee to remain within 2% of the original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: high travel coil-over spring\u003c\/li\u003e\n\u003cli\u003eInside diameter: 2-1\/2in (2.5in)\u003c\/li\u003e\n\u003cli\u003eFree length: 12in\u003c\/li\u003e\n\u003cli\u003eSpring rate: 130 lbs\/in\u003c\/li\u003e\n\u003cli\u003eMaterial: chrome silicon alloy spring wire\u003c\/li\u003e\n\u003cli\u003eFinish: silver powder coated\u003c\/li\u003e\n\u003cli\u003eEnds: ground square both ends\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee within 2% of original free height and rate\u003c\/li\u003e\n\u003cli\u003ePart number: 12HT130\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat is the inside diameter of this QA1 high travel spring?\u003c\/h5\u003e\u003cp\u003eThis spring has a 2-1\/2in (2.5in) inside diameter, sized for QA1 coil-over shocks and other coil-over systems that use standard 2.5in ID springs.\u003c\/p\u003e\u003ch5\u003eWhat are this spring's free length and rate?\u003c\/h5\u003e\u003cp\u003eIt has a 12in free length and a 130 lbs\/in spring rate.\u003c\/p\u003e\u003ch5\u003eWhat makes QA1 high travel springs lighter than standard springs?\u003c\/h5\u003e\u003cp\u003eThey are wound from high-tensile chrome silicon alloy spring wire, which uses fewer coils and a smaller wire diameter to cut weight and increase travel while reducing unsprung mass.\u003c\/p\u003e\u003ch5\u003eAre QA1 springs guaranteed?\u003c\/h5\u003e\u003cp\u003eYes. QA1 springs are lifetime guaranteed to remain within 2% of their original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is the inside diameter of this QA1 high travel spring?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This spring has a 2-1\/2in (2.5in) inside diameter, sized for QA1 coil-over shocks and other coil-over systems that use standard 2.5in ID springs.\"}}, {\"@type\": \"Question\", \"name\": \"What are this spring's free length and rate?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It has a 12in free length and a 130 lbs\/in spring rate.\"}}, {\"@type\": \"Question\", \"name\": \"What makes QA1 high travel springs lighter than standard springs?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are wound from high-tensile chrome silicon alloy spring wire, which uses fewer coils and a smaller wire diameter to cut weight and increase travel while reducing unsprung mass.\"}}, {\"@type\": \"Question\", \"name\": \"Are QA1 springs guaranteed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. QA1 springs are lifetime guaranteed to remain within 2% of their original free height and rate under normal operating conditions.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846053535792,"sku":"QAP12HT130","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/776fe118ff580038cad6474a5202b136_6b296a0d-ac26-4f03-9a17-bc4e2f2ecf6a.jpg?v=1739510354"},{"product_id":"qa1-high-travel-coil-over-spring-qap12ht150","title":"QA1 High Travel Coil-Over Spring | 2-1\/2in ID, 12in, 150 lbs\/in, Silver Powder Coated | 12HT150","description":"\u003cp\u003eQA1 high travel coil-over springs are wound from specially designed high-tensile chrome silicon alloy spring wire, which allows fewer coils and a smaller wire diameter. The result is a lighter spring with increased travel from the larger gap between coils, reducing unsprung weight and reacting faster for improved suspension response. Careful heat-treating and post-processing extend fatigue life, and the coil design lets the spring compress to coil-bind without affecting spring rate or free height. This spring is ground at both ends for straight, consistent operation, finished in silver powder coat, and made in the USA. All QA1 springs carry a lifetime guarantee to remain within 2% of the original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: high travel coil-over spring\u003c\/li\u003e\n\u003cli\u003eInside diameter: 2-1\/2in (2.5in)\u003c\/li\u003e\n\u003cli\u003eFree length: 12in\u003c\/li\u003e\n\u003cli\u003eSpring rate: 150 lbs\/in\u003c\/li\u003e\n\u003cli\u003eMaterial: chrome silicon alloy spring wire\u003c\/li\u003e\n\u003cli\u003eFinish: silver powder coated\u003c\/li\u003e\n\u003cli\u003eEnds: ground square both ends\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee within 2% of original free height and rate\u003c\/li\u003e\n\u003cli\u003ePart number: 12HT150\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat is the inside diameter of this QA1 high travel spring?\u003c\/h5\u003e\u003cp\u003eThis spring has a 2-1\/2in (2.5in) inside diameter, sized for QA1 coil-over shocks and other coil-over systems that use standard 2.5in ID springs.\u003c\/p\u003e\u003ch5\u003eWhat are this spring's free length and rate?\u003c\/h5\u003e\u003cp\u003eIt has a 12in free length and a 150 lbs\/in spring rate.\u003c\/p\u003e\u003ch5\u003eWhat makes QA1 high travel springs lighter than standard springs?\u003c\/h5\u003e\u003cp\u003eThey are wound from high-tensile chrome silicon alloy spring wire, which uses fewer coils and a smaller wire diameter to cut weight and increase travel while reducing unsprung mass.\u003c\/p\u003e\u003ch5\u003eAre QA1 springs guaranteed?\u003c\/h5\u003e\u003cp\u003eYes. QA1 springs are lifetime guaranteed to remain within 2% of their original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is the inside diameter of this QA1 high travel spring?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This spring has a 2-1\/2in (2.5in) inside diameter, sized for QA1 coil-over shocks and other coil-over systems that use standard 2.5in ID springs.\"}}, {\"@type\": \"Question\", \"name\": \"What are this spring's free length and rate?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It has a 12in free length and a 150 lbs\/in spring rate.\"}}, {\"@type\": \"Question\", \"name\": \"What makes QA1 high travel springs lighter than standard springs?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are wound from high-tensile chrome silicon alloy spring wire, which uses fewer coils and a smaller wire diameter to cut weight and increase travel while reducing unsprung mass.\"}}, {\"@type\": \"Question\", \"name\": \"Are QA1 springs guaranteed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. QA1 springs are lifetime guaranteed to remain within 2% of their original free height and rate under normal operating conditions.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846053666864,"sku":"QAP12HT150","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/776fe118ff580038cad6474a5202b136_1bcfa9ee-8980-4ce3-8ba3-55d298c1c509.jpg?v=1739510355"},{"product_id":"qa1-high-travel-coil-over-spring-qap12ht150b","title":"QA1 High Travel Coil-Over Spring | 2-1\/2in ID, 12in, 150 lbs\/in, Black Powder Coated | 12HT150B","description":"\u003cp\u003eQA1 high travel coil-over springs are wound from specially designed high-tensile chrome silicon alloy spring wire, which allows fewer coils and a smaller wire diameter. The result is a lighter spring with increased travel from the larger gap between coils, reducing unsprung weight and reacting faster for improved suspension response. Careful heat-treating and post-processing extend fatigue life, and the coil design lets the spring compress to coil-bind without affecting spring rate or free height. This spring is ground at both ends for straight, consistent operation, finished in black powder coat, and made in the USA. All QA1 springs carry a lifetime guarantee to remain within 2% of the original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: high travel coil-over spring\u003c\/li\u003e\n\u003cli\u003eInside diameter: 2-1\/2in (2.5in)\u003c\/li\u003e\n\u003cli\u003eFree length: 12in\u003c\/li\u003e\n\u003cli\u003eSpring rate: 150 lbs\/in\u003c\/li\u003e\n\u003cli\u003eMaterial: chrome silicon alloy spring wire\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coated\u003c\/li\u003e\n\u003cli\u003eEnds: ground square both ends\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee within 2% of original free height and rate\u003c\/li\u003e\n\u003cli\u003ePart number: 12HT150B\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat is the inside diameter of this QA1 high travel spring?\u003c\/h5\u003e\u003cp\u003eThis spring has a 2-1\/2in (2.5in) inside diameter, sized for QA1 coil-over shocks and other coil-over systems that use standard 2.5in ID springs.\u003c\/p\u003e\u003ch5\u003eWhat are this spring's free length and rate?\u003c\/h5\u003e\u003cp\u003eIt has a 12in free length and a 150 lbs\/in spring rate.\u003c\/p\u003e\u003ch5\u003eWhat makes QA1 high travel springs lighter than standard springs?\u003c\/h5\u003e\u003cp\u003eThey are wound from high-tensile chrome silicon alloy spring wire, which uses fewer coils and a smaller wire diameter to cut weight and increase travel while reducing unsprung mass.\u003c\/p\u003e\u003ch5\u003eAre QA1 springs guaranteed?\u003c\/h5\u003e\u003cp\u003eYes. QA1 springs are lifetime guaranteed to remain within 2% of their original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is the inside diameter of this QA1 high travel spring?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This spring has a 2-1\/2in (2.5in) inside diameter, sized for QA1 coil-over shocks and other coil-over systems that use standard 2.5in ID springs.\"}}, {\"@type\": \"Question\", \"name\": \"What are this spring's free length and rate?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It has a 12in free length and a 150 lbs\/in spring rate.\"}}, {\"@type\": \"Question\", \"name\": \"What makes QA1 high travel springs lighter than standard springs?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are wound from high-tensile chrome silicon alloy spring wire, which uses fewer coils and a smaller wire diameter to cut weight and increase travel while reducing unsprung mass.\"}}, {\"@type\": \"Question\", \"name\": \"Are QA1 springs guaranteed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. QA1 springs are lifetime guaranteed to remain within 2% of their original free height and rate under normal operating conditions.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846053732400,"sku":"QAP12HT150B","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/48a02bfc5e921073d3244e392feae437_7000df74-e424-4ebd-a08d-63703d08068e.jpg?v=1739510356"},{"product_id":"qa1-high-travel-coil-over-spring-qap12ht170","title":"QA1 High Travel Coil-Over Spring | 2-1\/2in ID, 12in, 170 lbs\/in, Silver Powder Coated | 12HT170","description":"\u003cp\u003eQA1 high travel coil-over springs are wound from specially designed high-tensile chrome silicon alloy spring wire, which allows fewer coils and a smaller wire diameter. The result is a lighter spring with increased travel from the larger gap between coils, reducing unsprung weight and reacting faster for improved suspension response. Careful heat-treating and post-processing extend fatigue life, and the coil design lets the spring compress to coil-bind without affecting spring rate or free height. This spring is ground at both ends for straight, consistent operation, finished in silver powder coat, and made in the USA. All QA1 springs carry a lifetime guarantee to remain within 2% of the original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: high travel coil-over spring\u003c\/li\u003e\n\u003cli\u003eInside diameter: 2-1\/2in (2.5in)\u003c\/li\u003e\n\u003cli\u003eFree length: 12in\u003c\/li\u003e\n\u003cli\u003eSpring rate: 170 lbs\/in\u003c\/li\u003e\n\u003cli\u003eMaterial: chrome silicon alloy spring wire\u003c\/li\u003e\n\u003cli\u003eFinish: silver powder coated\u003c\/li\u003e\n\u003cli\u003eEnds: ground square both ends\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee within 2% of original free height and rate\u003c\/li\u003e\n\u003cli\u003ePart number: 12HT170\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat is the inside diameter of this QA1 high travel spring?\u003c\/h5\u003e\u003cp\u003eThis spring has a 2-1\/2in (2.5in) inside diameter, sized for QA1 coil-over shocks and other coil-over systems that use standard 2.5in ID springs.\u003c\/p\u003e\u003ch5\u003eWhat are this spring's free length and rate?\u003c\/h5\u003e\u003cp\u003eIt has a 12in free length and a 170 lbs\/in spring rate.\u003c\/p\u003e\u003ch5\u003eWhat makes QA1 high travel springs lighter than standard springs?\u003c\/h5\u003e\u003cp\u003eThey are wound from high-tensile chrome silicon alloy spring wire, which uses fewer coils and a smaller wire diameter to cut weight and increase travel while reducing unsprung mass.\u003c\/p\u003e\u003ch5\u003eAre QA1 springs guaranteed?\u003c\/h5\u003e\u003cp\u003eYes. QA1 springs are lifetime guaranteed to remain within 2% of their original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is the inside diameter of this QA1 high travel spring?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This spring has a 2-1\/2in (2.5in) inside diameter, sized for QA1 coil-over shocks and other coil-over systems that use standard 2.5in ID springs.\"}}, {\"@type\": \"Question\", \"name\": \"What are this spring's free length and rate?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It has a 12in free length and a 170 lbs\/in spring rate.\"}}, {\"@type\": \"Question\", \"name\": \"What makes QA1 high travel springs lighter than standard springs?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are wound from high-tensile chrome silicon alloy spring wire, which uses fewer coils and a smaller wire diameter to cut weight and increase travel while reducing unsprung mass.\"}}, {\"@type\": \"Question\", \"name\": \"Are QA1 springs guaranteed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. QA1 springs are lifetime guaranteed to remain within 2% of their original free height and rate under normal operating conditions.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846053830704,"sku":"QAP12HT170","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/776fe118ff580038cad6474a5202b136_af27b3b6-3025-4940-b01e-57de70e1dcf6.jpg?v=1739510357"},{"product_id":"qa1-high-travel-coil-over-spring-qap14ht110","title":"QA1 High Travel Coil-Over Spring | 2-1\/2in ID, 14in, 110 lbs\/in, Silver Powder Coated | 14HT110","description":"\u003cp\u003eQA1 high travel coil-over springs are wound from specially designed high-tensile chrome silicon alloy spring wire, which allows fewer coils and a smaller wire diameter. The result is a lighter spring with increased travel from the larger gap between coils, reducing unsprung weight and reacting faster for improved suspension response. Careful heat-treating and post-processing extend fatigue life, and the coil design lets the spring compress to coil-bind without affecting spring rate or free height. This spring is ground at both ends for straight, consistent operation, finished in silver powder coat, and made in the USA. All QA1 springs carry a lifetime guarantee to remain within 2% of the original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: high travel coil-over spring\u003c\/li\u003e\n\u003cli\u003eInside diameter: 2-1\/2in (2.5in)\u003c\/li\u003e\n\u003cli\u003eFree length: 14in\u003c\/li\u003e\n\u003cli\u003eSpring rate: 110 lbs\/in\u003c\/li\u003e\n\u003cli\u003eMaterial: chrome silicon alloy spring wire\u003c\/li\u003e\n\u003cli\u003eFinish: silver powder coated\u003c\/li\u003e\n\u003cli\u003eEnds: ground square both ends\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee within 2% of original free height and rate\u003c\/li\u003e\n\u003cli\u003ePart number: 14HT110\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat is the inside diameter of this QA1 high travel spring?\u003c\/h5\u003e\u003cp\u003eThis spring has a 2-1\/2in (2.5in) inside diameter, sized for QA1 coil-over shocks and other coil-over systems that use standard 2.5in ID springs.\u003c\/p\u003e\u003ch5\u003eWhat are this spring's free length and rate?\u003c\/h5\u003e\u003cp\u003eIt has a 14in free length and a 110 lbs\/in spring rate.\u003c\/p\u003e\u003ch5\u003eWhat makes QA1 high travel springs lighter than standard springs?\u003c\/h5\u003e\u003cp\u003eThey are wound from high-tensile chrome silicon alloy spring wire, which uses fewer coils and a smaller wire diameter to cut weight and increase travel while reducing unsprung mass.\u003c\/p\u003e\u003ch5\u003eAre QA1 springs guaranteed?\u003c\/h5\u003e\u003cp\u003eYes. QA1 springs are lifetime guaranteed to remain within 2% of their original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is the inside diameter of this QA1 high travel spring?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This spring has a 2-1\/2in (2.5in) inside diameter, sized for QA1 coil-over shocks and other coil-over systems that use standard 2.5in ID springs.\"}}, {\"@type\": \"Question\", \"name\": \"What are this spring's free length and rate?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It has a 14in free length and a 110 lbs\/in spring rate.\"}}, {\"@type\": \"Question\", \"name\": \"What makes QA1 high travel springs lighter than standard springs?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are wound from high-tensile chrome silicon alloy spring wire, which uses fewer coils and a smaller wire diameter to cut weight and increase travel while reducing unsprung mass.\"}}, {\"@type\": \"Question\", \"name\": \"Are QA1 springs guaranteed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. QA1 springs are lifetime guaranteed to remain within 2% of their original free height and rate under normal operating conditions.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846053961776,"sku":"QAP14HT110","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/66aba056c8928a343443309a537a8296L.jpg?v=1739510359"},{"product_id":"qa1-high-travel-coil-over-spring-qap14ht130","title":"QA1 High Travel Coil-Over Spring | 2-1\/2in ID, 14in, 130 lbs\/in, Silver Powder Coated | 14HT130","description":"\u003cp\u003eQA1 high travel coil-over springs are wound from specially designed high-tensile chrome silicon alloy spring wire, which allows fewer coils and a smaller wire diameter. The result is a lighter spring with increased travel from the larger gap between coils, reducing unsprung weight and reacting faster for improved suspension response. Careful heat-treating and post-processing extend fatigue life, and the coil design lets the spring compress to coil-bind without affecting spring rate or free height. This spring is ground at both ends for straight, consistent operation, finished in silver powder coat, and made in the USA. All QA1 springs carry a lifetime guarantee to remain within 2% of the original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: high travel coil-over spring\u003c\/li\u003e\n\u003cli\u003eInside diameter: 2-1\/2in (2.5in)\u003c\/li\u003e\n\u003cli\u003eFree length: 14in\u003c\/li\u003e\n\u003cli\u003eSpring rate: 130 lbs\/in\u003c\/li\u003e\n\u003cli\u003eMaterial: chrome silicon alloy spring wire\u003c\/li\u003e\n\u003cli\u003eFinish: silver powder coated\u003c\/li\u003e\n\u003cli\u003eEnds: ground square both ends\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee within 2% of original free height and rate\u003c\/li\u003e\n\u003cli\u003ePart number: 14HT130\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat is the inside diameter of this QA1 high travel spring?\u003c\/h5\u003e\u003cp\u003eThis spring has a 2-1\/2in (2.5in) inside diameter, sized for QA1 coil-over shocks and other coil-over systems that use standard 2.5in ID springs.\u003c\/p\u003e\u003ch5\u003eWhat are this spring's free length and rate?\u003c\/h5\u003e\u003cp\u003eIt has a 14in free length and a 130 lbs\/in spring rate.\u003c\/p\u003e\u003ch5\u003eWhat makes QA1 high travel springs lighter than standard springs?\u003c\/h5\u003e\u003cp\u003eThey are wound from high-tensile chrome silicon alloy spring wire, which uses fewer coils and a smaller wire diameter to cut weight and increase travel while reducing unsprung mass.\u003c\/p\u003e\u003ch5\u003eAre QA1 springs guaranteed?\u003c\/h5\u003e\u003cp\u003eYes. QA1 springs are lifetime guaranteed to remain within 2% of their original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is the inside diameter of this QA1 high travel spring?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This spring has a 2-1\/2in (2.5in) inside diameter, sized for QA1 coil-over shocks and other coil-over systems that use standard 2.5in ID springs.\"}}, {\"@type\": \"Question\", \"name\": \"What are this spring's free length and rate?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It has a 14in free length and a 130 lbs\/in spring rate.\"}}, {\"@type\": \"Question\", \"name\": \"What makes QA1 high travel springs lighter than standard springs?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are wound from high-tensile chrome silicon alloy spring wire, which uses fewer coils and a smaller wire diameter to cut weight and increase travel while reducing unsprung mass.\"}}, {\"@type\": \"Question\", \"name\": \"Are QA1 springs guaranteed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. QA1 springs are lifetime guaranteed to remain within 2% of their original free height and rate under normal operating conditions.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846054125616,"sku":"QAP14HT130","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/66aba056c8928a343443309a537a8296L_7be6d2d8-b19b-4c4c-ac96-e8b267be9a89.jpg?v=1739510361"},{"product_id":"qa1-high-travel-coil-over-spring-qap14ht130b","title":"QA1 High Travel Coil-Over Spring | 2-1\/2in ID, 14in, 130 lbs\/in, Black Powder Coated | 14HT130B","description":"\u003cp\u003eQA1 high travel coil-over springs are wound from specially designed high-tensile chrome silicon alloy spring wire, which allows fewer coils and a smaller wire diameter. The result is a lighter spring with increased travel from the larger gap between coils, reducing unsprung weight and reacting faster for improved suspension response. Careful heat-treating and post-processing extend fatigue life, and the coil design lets the spring compress to coil-bind without affecting spring rate or free height. This spring is ground at both ends for straight, consistent operation, finished in black powder coat, and made in the USA. All QA1 springs carry a lifetime guarantee to remain within 2% of the original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: high travel coil-over spring\u003c\/li\u003e\n\u003cli\u003eInside diameter: 2-1\/2in (2.5in)\u003c\/li\u003e\n\u003cli\u003eFree length: 14in\u003c\/li\u003e\n\u003cli\u003eSpring rate: 130 lbs\/in\u003c\/li\u003e\n\u003cli\u003eMaterial: chrome silicon alloy spring wire\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coated\u003c\/li\u003e\n\u003cli\u003eEnds: ground square both ends\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee within 2% of original free height and rate\u003c\/li\u003e\n\u003cli\u003ePart number: 14HT130B\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat is the inside diameter of this QA1 high travel spring?\u003c\/h5\u003e\u003cp\u003eThis spring has a 2-1\/2in (2.5in) inside diameter, sized for QA1 coil-over shocks and other coil-over systems that use standard 2.5in ID springs.\u003c\/p\u003e\u003ch5\u003eWhat are this spring's free length and rate?\u003c\/h5\u003e\u003cp\u003eIt has a 14in free length and a 130 lbs\/in spring rate.\u003c\/p\u003e\u003ch5\u003eWhat makes QA1 high travel springs lighter than standard springs?\u003c\/h5\u003e\u003cp\u003eThey are wound from high-tensile chrome silicon alloy spring wire, which uses fewer coils and a smaller wire diameter to cut weight and increase travel while reducing unsprung mass.\u003c\/p\u003e\u003ch5\u003eAre QA1 springs guaranteed?\u003c\/h5\u003e\u003cp\u003eYes. QA1 springs are lifetime guaranteed to remain within 2% of their original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is the inside diameter of this QA1 high travel spring?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This spring has a 2-1\/2in (2.5in) inside diameter, sized for QA1 coil-over shocks and other coil-over systems that use standard 2.5in ID springs.\"}}, {\"@type\": \"Question\", \"name\": \"What are this spring's free length and rate?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It has a 14in free length and a 130 lbs\/in spring rate.\"}}, {\"@type\": \"Question\", \"name\": \"What makes QA1 high travel springs lighter than standard springs?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are wound from high-tensile chrome silicon alloy spring wire, which uses fewer coils and a smaller wire diameter to cut weight and increase travel while reducing unsprung mass.\"}}, {\"@type\": \"Question\", \"name\": \"Are QA1 springs guaranteed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. QA1 springs are lifetime guaranteed to remain within 2% of their original free height and rate under normal operating conditions.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846054191152,"sku":"QAP14HT130B","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/48a02bfc5e921073d3244e392feae437_2075b500-ec5a-4243-9978-036352e2f582.jpg?v=1739510362"},{"product_id":"qa1-high-travel-coil-over-spring-qap14ht150b","title":"QA1 High Travel Coil-Over Spring | 2-1\/2in ID, 14in, 150 lbs\/in, Black Powder Coated | 14HT150B","description":"\u003cp\u003eQA1 high travel coil-over springs are wound from specially designed high-tensile chrome silicon alloy spring wire, which allows fewer coils and a smaller wire diameter. The result is a lighter spring with increased travel from the larger gap between coils, reducing unsprung weight and reacting faster for improved suspension response. Careful heat-treating and post-processing extend fatigue life, and the coil design lets the spring compress to coil-bind without affecting spring rate or free height. This spring is ground at both ends for straight, consistent operation, finished in black powder coat, and made in the USA. All QA1 springs carry a lifetime guarantee to remain within 2% of the original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: high travel coil-over spring\u003c\/li\u003e\n\u003cli\u003eInside diameter: 2-1\/2in (2.5in)\u003c\/li\u003e\n\u003cli\u003eFree length: 14in\u003c\/li\u003e\n\u003cli\u003eSpring rate: 150 lbs\/in\u003c\/li\u003e\n\u003cli\u003eMaterial: chrome silicon alloy spring wire\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coated\u003c\/li\u003e\n\u003cli\u003eEnds: ground square both ends\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee within 2% of original free height and rate\u003c\/li\u003e\n\u003cli\u003ePart number: 14HT150B\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat is the inside diameter of this QA1 high travel spring?\u003c\/h5\u003e\u003cp\u003eThis spring has a 2-1\/2in (2.5in) inside diameter, sized for QA1 coil-over shocks and other coil-over systems that use standard 2.5in ID springs.\u003c\/p\u003e\u003ch5\u003eWhat are this spring's free length and rate?\u003c\/h5\u003e\u003cp\u003eIt has a 14in free length and a 150 lbs\/in spring rate.\u003c\/p\u003e\u003ch5\u003eWhat makes QA1 high travel springs lighter than standard springs?\u003c\/h5\u003e\u003cp\u003eThey are wound from high-tensile chrome silicon alloy spring wire, which uses fewer coils and a smaller wire diameter to cut weight and increase travel while reducing unsprung mass.\u003c\/p\u003e\u003ch5\u003eAre QA1 springs guaranteed?\u003c\/h5\u003e\u003cp\u003eYes. QA1 springs are lifetime guaranteed to remain within 2% of their original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is the inside diameter of this QA1 high travel spring?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This spring has a 2-1\/2in (2.5in) inside diameter, sized for QA1 coil-over shocks and other coil-over systems that use standard 2.5in ID springs.\"}}, {\"@type\": \"Question\", \"name\": \"What are this spring's free length and rate?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It has a 14in free length and a 150 lbs\/in spring rate.\"}}, {\"@type\": \"Question\", \"name\": \"What makes QA1 high travel springs lighter than standard springs?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are wound from high-tensile chrome silicon alloy spring wire, which uses fewer coils and a smaller wire diameter to cut weight and increase travel while reducing unsprung mass.\"}}, {\"@type\": \"Question\", \"name\": \"Are QA1 springs guaranteed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. QA1 springs are lifetime guaranteed to remain within 2% of their original free height and rate under normal operating conditions.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846054322224,"sku":"QAP14HT150B","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/48a02bfc5e921073d3244e392feae437_ddf9b81c-c9be-41c8-b3ce-2a46d51b1007.jpg?v=1739510364"},{"product_id":"qa1-high-travel-coil-over-spring-qap14ht250","title":"QA1 High Travel Coil-Over Spring | 2-1\/2in ID, 14in, 250 lbs\/in, Silver Powder Coated | 14HT250","description":"\u003cp\u003eQA1 high travel coil-over springs are wound from specially designed high-tensile chrome silicon alloy spring wire, which allows fewer coils and a smaller wire diameter. The result is a lighter spring with increased travel from the larger gap between coils, reducing unsprung weight and reacting faster for improved suspension response. Careful heat-treating and post-processing extend fatigue life, and the coil design lets the spring compress to coil-bind without affecting spring rate or free height. This spring is ground at both ends for straight, consistent operation, finished in silver powder coat, and made in the USA. All QA1 springs carry a lifetime guarantee to remain within 2% of the original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: high travel coil-over spring\u003c\/li\u003e\n\u003cli\u003eInside diameter: 2-1\/2in (2.5in)\u003c\/li\u003e\n\u003cli\u003eFree length: 14in\u003c\/li\u003e\n\u003cli\u003eSpring rate: 250 lbs\/in\u003c\/li\u003e\n\u003cli\u003eMaterial: chrome silicon alloy spring wire\u003c\/li\u003e\n\u003cli\u003eFinish: silver powder coated\u003c\/li\u003e\n\u003cli\u003eEnds: ground square both ends\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee within 2% of original free height and rate\u003c\/li\u003e\n\u003cli\u003ePart number: 14HT250\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat is the inside diameter of this QA1 high travel spring?\u003c\/h5\u003e\u003cp\u003eThis spring has a 2-1\/2in (2.5in) inside diameter, sized for QA1 coil-over shocks and other coil-over systems that use standard 2.5in ID springs.\u003c\/p\u003e\u003ch5\u003eWhat are this spring's free length and rate?\u003c\/h5\u003e\u003cp\u003eIt has a 14in free length and a 250 lbs\/in spring rate.\u003c\/p\u003e\u003ch5\u003eWhat makes QA1 high travel springs lighter than standard springs?\u003c\/h5\u003e\u003cp\u003eThey are wound from high-tensile chrome silicon alloy spring wire, which uses fewer coils and a smaller wire diameter to cut weight and increase travel while reducing unsprung mass.\u003c\/p\u003e\u003ch5\u003eAre QA1 springs guaranteed?\u003c\/h5\u003e\u003cp\u003eYes. QA1 springs are lifetime guaranteed to remain within 2% of their original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is the inside diameter of this QA1 high travel spring?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This spring has a 2-1\/2in (2.5in) inside diameter, sized for QA1 coil-over shocks and other coil-over systems that use standard 2.5in ID springs.\"}}, {\"@type\": \"Question\", \"name\": \"What are this spring's free length and rate?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It has a 14in free length and a 250 lbs\/in spring rate.\"}}, {\"@type\": \"Question\", \"name\": \"What makes QA1 high travel springs lighter than standard springs?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are wound from high-tensile chrome silicon alloy spring wire, which uses fewer coils and a smaller wire diameter to cut weight and increase travel while reducing unsprung mass.\"}}, {\"@type\": \"Question\", \"name\": \"Are QA1 springs guaranteed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. QA1 springs are lifetime guaranteed to remain within 2% of their original free height and rate under normal operating conditions.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846054387760,"sku":"QAP14HT250","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/66aba056c8928a343443309a537a8296L_e75bc44d-6352-450e-beab-7222b6219d7b.jpg?v=1739510365"},{"product_id":"qa1-lower-boxed-trailing-arms-qap5205","title":"QA1 Lower Boxed Trailing Arms | 1964-1972 GM A-Body | 5205","description":"\u003cp\u003eThe QA1 lower boxed trailing arms replace the factory rear lower control arms on 1964-1972 GM A-Body vehicles. They are constructed from 0.120 inch wall cold rolled steel tubing for strength and to eliminate flex, and use fluted, greasable polyurethane bushings on both ends in place of the softer stock rubber bushings for improved traction and more predictable handling. The arms are powder-coated gloss black, bolt in directly, and are made in the USA. Sold as a pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBoxed construction from 0.120 inch wall cold rolled steel tubing\u003c\/li\u003e\n\u003cli\u003eFluted, greasable polyurethane bushings on both ends\u003c\/li\u003e\n\u003cli\u003ePowder-coated gloss black finish\u003c\/li\u003e\n\u003cli\u003eBolt-in installation\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003cli\u003ePart number: 5205\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1964 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1965 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1966 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1967 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1968 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1969 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1970 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1971 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1964 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1965 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1966 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1967 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1968 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1969 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1970 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1971 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1972 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1964 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1965 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1966 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1967 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1968 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1969 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1970 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1971 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1972 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1964 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1965 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1966 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1967 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1968 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1969 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1970 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1971 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1972 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1964 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1965 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1966 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1967 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1968 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1969 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1970 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1971 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1972 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1965 Buick Gran Sport\u003c\/li\u003e\n\u003cli\u003e1966 Buick Gran Sport\u003c\/li\u003e\n\u003cli\u003e1967 Buick Gran Sport\u003c\/li\u003e\n\u003cli\u003e1964 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1965 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1966 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1967 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1968 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1969 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1970 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1971 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1972 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1964 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1965 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1966 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1967 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1968 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1969 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1970 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1971 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1972 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1964 Buick Special\u003c\/li\u003e\n\u003cli\u003e1965 Buick Special\u003c\/li\u003e\n\u003cli\u003e1966 Buick Special\u003c\/li\u003e\n\u003cli\u003e1967 Buick Special\u003c\/li\u003e\n\u003cli\u003e1968 Buick Special\u003c\/li\u003e\n\u003cli\u003e1969 Buick Special\u003c\/li\u003e\n\u003cli\u003e1971 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1972 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1964 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1965 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1966 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1967 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1968 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1969 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1970 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1964 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1965 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1966 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1967 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1968 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1969 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1970 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1971 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1972 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/d8c2bd5d2bbd7aa33d41b085fdbd40ea.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat vehicles do these QA1 boxed trailing arms fit?\u003c\/h5\u003e\u003cp\u003eThey fit 1964-1972 GM A-Body vehicles. See the Vehicle Applications list for the covered models and years.\u003c\/p\u003e\u003ch5\u003eWhat are the arms made from?\u003c\/h5\u003e\u003cp\u003eThey are boxed from 0.120 inch wall cold rolled steel tubing for maximum strength and to eliminate flex.\u003c\/p\u003e\u003ch5\u003eWhat type of bushings do they use?\u003c\/h5\u003e\u003cp\u003eThey use fluted, greasable polyurethane bushings on both ends, which are firmer and longer lasting than the stock rubber bushings.\u003c\/p\u003e\u003ch5\u003eWhat finish do they have?\u003c\/h5\u003e\u003cp\u003eThe boxed trailing arms are powder-coated gloss black for a long-lasting finish.\u003c\/p\u003e\u003ch5\u003eAre they sold individually or in pairs?\u003c\/h5\u003e\u003cp\u003eThey are sold as a pair and bolt in directly.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What vehicles do these QA1 boxed trailing arms fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They fit 1964-1972 GM A-Body vehicles. See the Vehicle Applications list for the covered models and years.\"}}, {\"@type\": \"Question\", \"name\": \"What are the arms made from?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are boxed from 0.120 inch wall cold rolled steel tubing for maximum strength and to eliminate flex.\"}}, {\"@type\": \"Question\", \"name\": \"What type of bushings do they use?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They use fluted, greasable polyurethane bushings on both ends, which are firmer and longer lasting than the stock rubber bushings.\"}}, {\"@type\": \"Question\", \"name\": \"What finish do they have?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The boxed trailing arms are powder-coated gloss black for a long-lasting finish.\"}}, {\"@type\": \"Question\", \"name\": \"Are they sold individually or in pairs?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are sold as a pair and bolt in directly.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846054518832,"sku":"QAP5205","price":386.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/3d0241caa0045446603e31f7e3355ea4.jpg?v=1739510366"},{"product_id":"qa1-non-adjustable-rear-frame-support-qap5211","title":"QA1 Non-Adjustable Rear Frame Support | 1968-1972 GM A-Body | 5211","description":"\u003cp\u003eThese QA1 tubular rear frame supports reinforce the rear trailing arm mounts on GM A-body cars to improve traction, reduce wheel hop, and put more power to the ground. They are a non-adjustable design, install with all necessary hardware, and are sold in pairs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: rear frame support (trailing arm brace)\u003c\/li\u003e\n\u003cli\u003eAdjustability: non-adjustable\u003c\/li\u003e\n\u003cli\u003eConstruction: tubular steel\u003c\/li\u003e\n\u003cli\u003eReinforces the rear trailing arm mounts\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eAll installation hardware included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003ePart number: 5211\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1968 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1969 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1970 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1971 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1972 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1968 Buick Special\u003c\/li\u003e\n\u003cli\u003e1969 Buick Special\u003c\/li\u003e\n\u003cli\u003e1968 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1969 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1970 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1971 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1972 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1968 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1969 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1970 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1971 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1972 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1970 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1971 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1972 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1971 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1972 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1968 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1969 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1970 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1971 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1968 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1969 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1970 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1971 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1972 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1968 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1969 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1970 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1971 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1972 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1968 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1969 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1970 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1971 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1972 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1969 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1970 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1971 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1972 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1968 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1969 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1970 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1971 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1972 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1968 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1969 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1970 Pontiac Tempest\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/cbed5db683d4743013a17418d19b2611.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat does the QA1 5211 rear frame support do?\u003c\/h5\u003e\u003cp\u003eIt reinforces the rear trailing arm mounts to improve traction, reduce wheel hop, and cut chassis flex.\u003c\/p\u003e\u003ch5\u003eIs the 5211 support adjustable?\u003c\/h5\u003e\u003cp\u003eNo. This is a non-adjustable rear frame support.\u003c\/p\u003e\u003ch5\u003eIs hardware included?\u003c\/h5\u003e\u003cp\u003eYes. All necessary installation hardware is included, and the supports are sold in pairs.\u003c\/p\u003e\u003ch5\u003eAre these sold individually or in pairs?\u003c\/h5\u003e\u003cp\u003eThey are sold in pairs.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does the QA1 5211 rear frame support do?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It reinforces the rear trailing arm mounts to improve traction, reduce wheel hop, and cut chassis flex.\"}}, {\"@type\": \"Question\", \"name\": \"Is the 5211 support adjustable?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. This is a non-adjustable rear frame support.\"}}, {\"@type\": \"Question\", \"name\": \"Is hardware included?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. All necessary installation hardware is included, and the supports are sold in pairs.\"}}, {\"@type\": \"Question\", \"name\": \"Are these sold individually or in pairs?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are sold in pairs.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846054584368,"sku":"QAP5211","price":193.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/1731b997de5a981af860955d1a3ade6aL.jpg?v=1739510367"},{"product_id":"qa1-k-member-engine-mount-kit-5-0l-qap52113","title":"QA1 K-Member Engine Mount Kit (5.0L) | 1979-1995 Ford Mustang | 52113","description":"\u003cp\u003eThese QA1 engine mounts let an owner who already has a QA1 Mustang K-member upgrade to a 5.0L engine. They are made for QA1 Mustang K-members only and are offered as part of QA1's multiple engine-swap mounting options.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: K-member engine mount kit\u003c\/li\u003e\n\u003cli\u003eEngine: 5.0L\u003c\/li\u003e\n\u003cli\u003eCompatibility: QA1 Mustang K-members only\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003ePart number: 52113\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1979 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1980 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1981 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1982 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1983 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1984 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1985 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1986 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1987 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1988 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1989 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1990 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1991 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1992 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1993 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1994 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1995 Ford Mustang\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/e558bbfd2dcafca67a39ad18bed43ac8.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat is this mount kit for?\u003c\/h5\u003e\u003cp\u003eIt mounts a 5.0L engine to a QA1 Mustang K-member on the 1979-1995 Ford Mustang.\u003c\/p\u003e\u003ch5\u003eWill it work with a stock K-member?\u003c\/h5\u003e\u003cp\u003eNo. These mounts are for use with QA1 Mustang K-members only.\u003c\/p\u003e\u003ch5\u003eDoes it support engine swaps?\u003c\/h5\u003e\u003cp\u003eYes. QA1 offers multiple engine-mount options so the K-member can be set up for different engines.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is this mount kit for?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It mounts a 5.0L engine to a QA1 Mustang K-member on the 1979-1995 Ford Mustang.\"}}, {\"@type\": \"Question\", \"name\": \"Will it work with a stock K-member?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. These mounts are for use with QA1 Mustang K-members only.\"}}, {\"@type\": \"Question\", \"name\": \"Does it support engine swaps?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. QA1 offers multiple engine-mount options so the K-member can be set up for different engines.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846054649904,"sku":"QAP52113","price":117.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/af1d0e7b1b63cbdc46114e830661b76a.jpg?v=1739510368"},{"product_id":"qa1-k-member-engine-mount-kit-ls-qap52115","title":"QA1 K-Member Engine Mount Kit (LS) | 1979-2004 Ford Mustang | 52115","description":"\u003cp\u003eThese QA1 engine mounts let an owner who already has a QA1 Mustang K-member run an LS engine. They are made for QA1 Mustang K-members only and are part of QA1's multiple engine-swap mounting options.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: K-member engine mount kit\u003c\/li\u003e\n\u003cli\u003eEngine: LS\u003c\/li\u003e\n\u003cli\u003eCompatibility: QA1 Mustang K-members only\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003ePart number: 52115\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1979 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1980 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1981 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1982 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1983 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1984 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1985 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1986 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1987 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1988 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1989 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1990 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1991 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1992 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1993 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1994 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1995 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1996 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1997 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1998 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1999 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2000 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2001 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2002 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2003 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2004 Ford Mustang\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/e558bbfd2dcafca67a39ad18bed43ac8.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat is this mount kit for?\u003c\/h5\u003e\u003cp\u003eIt mounts an LS engine to a QA1 Mustang K-member on the 1979-2004 Ford Mustang.\u003c\/p\u003e\u003ch5\u003eWill it work with a stock K-member?\u003c\/h5\u003e\u003cp\u003eNo. These mounts are for use with QA1 Mustang K-members only.\u003c\/p\u003e\u003ch5\u003eDoes it support engine swaps?\u003c\/h5\u003e\u003cp\u003eYes. QA1 offers multiple engine-mount options so the K-member can be set up for different engines.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is this mount kit for?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It mounts an LS engine to a QA1 Mustang K-member on the 1979-2004 Ford Mustang.\"}}, {\"@type\": \"Question\", \"name\": \"Will it work with a stock K-member?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. These mounts are for use with QA1 Mustang K-members only.\"}}, {\"@type\": \"Question\", \"name\": \"Does it support engine swaps?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. QA1 offers multiple engine-mount options so the K-member can be set up for different engines.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846054715440,"sku":"QAP52115","price":117.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/1ac016b49763a36864eb6974110fe340L.jpg?v=1739510369"},{"product_id":"qa1-rear-anti-hop-bars-qap5213","title":"QA1 Rear Anti-Hop Bars | 1964-1972 GM A-Body | 5213","description":"\u003cp\u003eQA1 rear anti-hop bars relocate the upper trailing arms to change the instant center of the rear suspension. The revised geometry improves chassis reaction and increases forward bite and traction while reducing suspension bind and wheel hop. They are one of the most effective and easily installed traction improvements and include graphite polyurethane bushings. Adjustable trailing arms are strongly recommended for maximum adjustability. The bars have a durable powder coat finish and are made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: rear anti-hop bars\u003c\/li\u003e\n\u003cli\u003eFunction: relocate upper trailing arms to improve instant center and forward bite\u003c\/li\u003e\n\u003cli\u003eBushings: graphite polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: durable powder coat\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003ePart number: 5213\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1965 Buick Gran Sport\u003c\/li\u003e\n\u003cli\u003e1966 Buick Gran Sport\u003c\/li\u003e\n\u003cli\u003e1967 Buick Gran Sport\u003c\/li\u003e\n\u003cli\u003e1964 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1965 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1966 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1967 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1964 Buick Special\u003c\/li\u003e\n\u003cli\u003e1965 Buick Special\u003c\/li\u003e\n\u003cli\u003e1966 Buick Special\u003c\/li\u003e\n\u003cli\u003e1967 Buick Special\u003c\/li\u003e\n\u003cli\u003e1964 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1965 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1966 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1967 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1964 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1965 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1966 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1967 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1970 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1971 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1972 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1964 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1965 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1966 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1967 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1964 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1965 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1966 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1967 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1964 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1965 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1966 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1967 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1964 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1965 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1966 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1967 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1969 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1970 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1971 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1972 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1964 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1965 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1966 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1967 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1964 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1965 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1966 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1967 Pontiac Tempest\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/5bea86e8e11ac63ba38b79c5bd433ccb.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat do anti-hop bars do?\u003c\/h5\u003e\u003cp\u003eThey relocate the upper trailing arms to change the instant center of the rear suspension, which increases forward bite and traction and reduces wheel hop.\u003c\/p\u003e\u003ch5\u003eAre adjustable trailing arms required?\u003c\/h5\u003e\u003cp\u003eThey are not required, but QA1 strongly recommends adjustable trailing arms for maximum adjustability and performance.\u003c\/p\u003e\u003ch5\u003eAre these made in the USA?\u003c\/h5\u003e\u003cp\u003eYes. QA1 part number 5213 is made in the USA.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What do anti-hop bars do?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They relocate the upper trailing arms to change the instant center of the rear suspension, which increases forward bite and traction and reduces wheel hop.\"}}, {\"@type\": \"Question\", \"name\": \"Are adjustable trailing arms required?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are not required, but QA1 strongly recommends adjustable trailing arms for maximum adjustability and performance.\"}}, {\"@type\": \"Question\", \"name\": \"Are these made in the USA?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. QA1 part number 5213 is made in the USA.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846054846512,"sku":"QAP5213","price":315.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/c1bc4f0a450772514976f935751c0cb3.jpg?v=1739510371"},{"product_id":"qa1-lower-boxed-trailing-arms-qap5221","title":"QA1 Lower Boxed Trailing Arms | 1979-2004 Ford Mustang \u0026 1979-1986 Mercury Capri | 5221","description":"\u003cp\u003eThe QA1 Lower Boxed Trailing Arms are a bolt-in rear suspension upgrade for 1979-2004 Ford Mustang and 1979-1986 Mercury Capri. They are constructed from 0.120 inch wall cold rolled steel tubing that is boxed for maximum strength and to eliminate flex, and they use fluted, greasable polyurethane bushings on both ends in place of the soft stock rubber bushings. Keeping the tires planted more firmly improves traction and gives a more predictable, better handling car. The arms are powder coated gloss black for a long lasting finish and are sold as a pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: lower boxed trailing arms, sold in pairs\u003c\/li\u003e\n\u003cli\u003eConstruction: 0.120 in wall cold rolled boxed steel tubing\u003c\/li\u003e\n\u003cli\u003eBushings: fluted, greasable polyurethane on both ends\u003c\/li\u003e\n\u003cli\u003eFinish: gloss black powder coat\u003c\/li\u003e\n\u003cli\u003eInstall: bolt-in\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003ePart number: 5221\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1979 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1980 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1981 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1982 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1983 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1984 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1985 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1986 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1987 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1988 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1989 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1990 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1991 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1992 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1993 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1994 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1995 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1996 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1997 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1998 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1999 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2000 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2001 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2002 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2003 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2004 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1979 Mercury Capri\u003c\/li\u003e\n\u003cli\u003e1980 Mercury Capri\u003c\/li\u003e\n\u003cli\u003e1981 Mercury Capri\u003c\/li\u003e\n\u003cli\u003e1982 Mercury Capri\u003c\/li\u003e\n\u003cli\u003e1983 Mercury Capri\u003c\/li\u003e\n\u003cli\u003e1984 Mercury Capri\u003c\/li\u003e\n\u003cli\u003e1985 Mercury Capri\u003c\/li\u003e\n\u003cli\u003e1986 Mercury Capri\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/18018d84476951bcef059cb7efd04f25.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat does the QA1 5221 trailing arm kit include?\u003c\/h5\u003e\u003cp\u003eIt includes two lower boxed trailing arms with greasable polyurethane bushings, sold as a pair.\u003c\/p\u003e\u003ch5\u003eWhat vehicles do the 5221 trailing arms fit?\u003c\/h5\u003e\u003cp\u003eThey fit 1979-2004 Ford Mustang and 1979-1986 Mercury Capri.\u003c\/p\u003e\u003ch5\u003eAre these a bolt-in installation?\u003c\/h5\u003e\u003cp\u003eYes. The arms are a direct bolt-in replacement for the stock lower trailing arms.\u003c\/p\u003e\u003ch5\u003eWhat bushings do they use?\u003c\/h5\u003e\u003cp\u003eThey use fluted, greasable polyurethane bushings on both ends, which are firmer and longer lasting than the stock rubber bushings.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does the QA1 5221 trailing arm kit include?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It includes two lower boxed trailing arms with greasable polyurethane bushings, sold as a pair.\"}}, {\"@type\": \"Question\", \"name\": \"What vehicles do the 5221 trailing arms fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They fit 1979-2004 Ford Mustang and 1979-1986 Mercury Capri.\"}}, {\"@type\": \"Question\", \"name\": \"Are these a bolt-in installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The arms are a direct bolt-in replacement for the stock lower trailing arms.\"}}, {\"@type\": \"Question\", \"name\": \"What bushings do they use?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They use fluted, greasable polyurethane bushings on both ends, which are firmer and longer lasting than the stock rubber bushings.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846054912048,"sku":"QAP5221","price":398.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/7de26d0f93b926f327082e6e5025fb0fL.jpg?v=1739510372"},{"product_id":"qa1-front-coil-over-conversion-system-qap52346-s400","title":"QA1 Front Coil-Over Conversion System | 1962-1972 Mopar B-Body \u0026 1970-1974 E-Body, Single Adjustable, 0-2in Drop | 52346-S400","description":"\u003cp\u003eThis QA1 system converts classic Mopar B and E-Body cars from torsion bar front suspension to a coil-over system. It includes a tubular K-member for reduced weight and header clearance, modular motor mounts, tubular control arms and rack-and-pinion steering, and it bolts in without cutting or welding. This drag-oriented version uses single-adjustable coil-overs and offers 0in to 2in of drop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTorsion bar to coil-over front suspension conversion\u003c\/li\u003e\n\u003cli\u003eTubular K-member with modular motor mounts for many engine options including Gen 3 Hemi\u003c\/li\u003e\n\u003cli\u003eQA1 tubular control arms with rod ends on upper and lower arms\u003c\/li\u003e\n\u003cli\u003eRack-and-pinion steering\u003c\/li\u003e\n\u003cli\u003eSingle-adjustable QA1 coil-overs\u003c\/li\u003e\n\u003cli\u003eDrag configuration with lighter spring rate for rear grip\u003c\/li\u003e\n\u003cli\u003e0in to 2in of drop\u003c\/li\u003e\n\u003cli\u003eUses Mustang II spindles for multiple brake options\u003c\/li\u003e\n\u003cli\u003eBolts in with no cutting or welding; made in the USA\u003c\/li\u003e\n\u003cli\u003ePart number: 52346-S400\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1970 Dodge Challenger\u003c\/li\u003e\n\u003cli\u003e1971 Dodge Challenger\u003c\/li\u003e\n\u003cli\u003e1972 Dodge Challenger\u003c\/li\u003e\n\u003cli\u003e1973 Dodge Challenger\u003c\/li\u003e\n\u003cli\u003e1974 Dodge Challenger\u003c\/li\u003e\n\u003cli\u003e1966 Dodge Charger\u003c\/li\u003e\n\u003cli\u003e1967 Dodge Charger\u003c\/li\u003e\n\u003cli\u003e1968 Dodge Charger\u003c\/li\u003e\n\u003cli\u003e1969 Dodge Charger\u003c\/li\u003e\n\u003cli\u003e1970 Dodge Charger\u003c\/li\u003e\n\u003cli\u003e1971 Dodge Charger\u003c\/li\u003e\n\u003cli\u003e1972 Dodge Charger\u003c\/li\u003e\n\u003cli\u003e1966 Dodge Coronet\u003c\/li\u003e\n\u003cli\u003e1967 Dodge Coronet\u003c\/li\u003e\n\u003cli\u003e1968 Dodge Coronet\u003c\/li\u003e\n\u003cli\u003e1969 Dodge Coronet\u003c\/li\u003e\n\u003cli\u003e1970 Dodge Coronet\u003c\/li\u003e\n\u003cli\u003e1971 Dodge Coronet\u003c\/li\u003e\n\u003cli\u003e1972 Dodge Coronet\u003c\/li\u003e\n\u003cli\u003e1970 Plymouth Barracuda\u003c\/li\u003e\n\u003cli\u003e1971 Plymouth Barracuda\u003c\/li\u003e\n\u003cli\u003e1972 Plymouth Barracuda\u003c\/li\u003e\n\u003cli\u003e1973 Plymouth Barracuda\u003c\/li\u003e\n\u003cli\u003e1974 Plymouth Barracuda\u003c\/li\u003e\n\u003cli\u003e1966 Plymouth Belvedere\u003c\/li\u003e\n\u003cli\u003e1967 Plymouth Belvedere\u003c\/li\u003e\n\u003cli\u003e1968 Plymouth Belvedere\u003c\/li\u003e\n\u003cli\u003e1969 Plymouth Belvedere\u003c\/li\u003e\n\u003cli\u003e1970 Plymouth Belvedere\u003c\/li\u003e\n\u003cli\u003e1967 Plymouth GTX\u003c\/li\u003e\n\u003cli\u003e1968 Plymouth GTX\u003c\/li\u003e\n\u003cli\u003e1969 Plymouth GTX\u003c\/li\u003e\n\u003cli\u003e1970 Plymouth GTX\u003c\/li\u003e\n\u003cli\u003e1971 Plymouth GTX\u003c\/li\u003e\n\u003cli\u003e1968 Plymouth Road Runner\u003c\/li\u003e\n\u003cli\u003e1969 Plymouth Road Runner\u003c\/li\u003e\n\u003cli\u003e1970 Plymouth Road Runner\u003c\/li\u003e\n\u003cli\u003e1971 Plymouth Road Runner\u003c\/li\u003e\n\u003cli\u003e1972 Plymouth Road Runner\u003c\/li\u003e\n\u003cli\u003e1966 Plymouth Satellite\u003c\/li\u003e\n\u003cli\u003e1967 Plymouth Satellite\u003c\/li\u003e\n\u003cli\u003e1968 Plymouth Satellite\u003c\/li\u003e\n\u003cli\u003e1969 Plymouth Satellite\u003c\/li\u003e\n\u003cli\u003e1970 Plymouth Satellite\u003c\/li\u003e\n\u003cli\u003e1971 Plymouth Satellite\u003c\/li\u003e\n\u003cli\u003e1972 Plymouth Satellite\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eDoes this conversion require cutting or welding?\u003c\/h5\u003e\u003cp\u003eNo. The system bolts in without any cutting or welding and uses Mustang II spindles for a wide range of brake options.\u003c\/p\u003e\u003ch5\u003eHow much drop does it offer?\u003c\/h5\u003e\u003cp\u003eThis drag configuration offers 0in to 2in of drop with its single-adjustable coil-overs.\u003c\/p\u003e\u003ch5\u003eDoes this kit bolt in?\u003c\/h5\u003e\u003cp\u003eThis QA1 kit is designed as a bolt-in installation for the 1962-1974 Mopar B-Body and E-Body using common hand tools, and it ships with the necessary hardware.\u003c\/p\u003e\u003ch5\u003eAre the shocks adjustable?\u003c\/h5\u003e\u003cp\u003eYes. The QA1 coil-over shocks allow ride height adjustment and shock valving adjustment so the ride can be tuned for street or performance use.\u003c\/p\u003e\u003ch5\u003eIs a warranty included?\u003c\/h5\u003e\u003cp\u003eQA1 single and double adjustable shocks are eligible for a best-in-class Limited Lifetime Warranty with registration at QA1.net\/warranty.\u003c\/p\u003e\u003ch5\u003eWhere is it made?\u003c\/h5\u003e\u003cp\u003eQA1 suspension is made in the USA in Lakeville, Minnesota.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Does this conversion require cutting or welding?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. The system bolts in without any cutting or welding and uses Mustang II spindles for a wide range of brake options.\"}}, {\"@type\": \"Question\", \"name\": \"How much drop does it offer?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This drag configuration offers 0in to 2in of drop with its single-adjustable coil-overs.\"}}, {\"@type\": \"Question\", \"name\": \"Does this kit bolt in?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This QA1 kit is designed as a bolt-in installation for the 1962-1974 Mopar B-Body and E-Body using common hand tools, and it ships with the necessary hardware.\"}}, {\"@type\": \"Question\", \"name\": \"Are the shocks adjustable?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The QA1 coil-over shocks allow ride height adjustment and shock valving adjustment so the ride can be tuned for street or performance use.\"}}, {\"@type\": \"Question\", \"name\": \"Is a warranty included?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"QA1 single and double adjustable shocks are eligible for a best-in-class Limited Lifetime Warranty with registration at QA1.net\/warranty.\"}}, {\"@type\": \"Question\", \"name\": \"Where is it made?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"QA1 suspension is made in the USA in Lakeville, Minnesota.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846055010352,"sku":"QAP52346-S400","price":5524.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/d3096d0a1eea5f61be2e8923902e6715L.png?v=1739510373"},{"product_id":"qa1-upper-adjustable-trailing-arms-qap5249","title":"QA1 Upper Adjustable Trailing Arms | 1964-1967 GM A-Body | 5249","description":"\u003cp\u003eThe QA1 Upper Adjustable Trailing Arms are a rear suspension upgrade for 1964-1967 GM A-body cars. The adjustable design lets the pinion angle be set by loosening the jam nuts and turning the arm without removing it from the vehicle, which makes dialing in rear geometry for handling and traction straightforward. They replace the soft OE differential bushings with polyurethane and use a spherical rod end with UHMW polyethylene bushings on the chassis end to let the rear suspension move freely and eliminate bushing bind. The arms are zinc plated and anodized and are sold as a pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: upper adjustable trailing arms, sold in pairs\u003c\/li\u003e\n\u003cli\u003eAdjustment: pinion angle, set on the vehicle via jam nuts\u003c\/li\u003e\n\u003cli\u003eDifferential end: polyurethane bushings\u003c\/li\u003e\n\u003cli\u003eChassis end: spherical rod end with UHMW polyethylene bushings\u003c\/li\u003e\n\u003cli\u003eFinish: zinc plated and anodized\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003ePart number: 5249\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1965 Buick Gran Sport\u003c\/li\u003e\n\u003cli\u003e1966 Buick Gran Sport\u003c\/li\u003e\n\u003cli\u003e1967 Buick Gran Sport\u003c\/li\u003e\n\u003cli\u003e1964 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1965 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1966 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1967 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1964 Buick Special\u003c\/li\u003e\n\u003cli\u003e1965 Buick Special\u003c\/li\u003e\n\u003cli\u003e1966 Buick Special\u003c\/li\u003e\n\u003cli\u003e1967 Buick Special\u003c\/li\u003e\n\u003cli\u003e1964 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1965 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1966 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1967 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1964 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1965 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1966 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1967 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1964 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1965 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1966 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1967 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1964 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1965 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1966 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1967 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1964 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1965 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1966 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1967 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1964 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1965 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1966 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1967 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1964 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1965 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1966 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1967 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1964 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1965 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1966 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1967 Pontiac Tempest\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/ae0534a3b2a1a6a815045d3e121f497d.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat vehicles do the QA1 5249 trailing arms fit?\u003c\/h5\u003e\u003cp\u003eThey fit 1964-1967 GM A-body cars, including the Chevelle, El Camino, GTO, LeMans, Tempest, Skylark, Special, Gran Sport, 442, Cutlass, and Vista Cruiser.\u003c\/p\u003e\u003ch5\u003eWhat makes these arms adjustable?\u003c\/h5\u003e\u003cp\u003eThe pinion angle can be adjusted by loosening the jam nuts and turning the arm without removing it from the vehicle.\u003c\/p\u003e\u003ch5\u003eWhat bushings do they use?\u003c\/h5\u003e\u003cp\u003eThey use polyurethane bushings on the differential end and a spherical rod end with UHMW polyethylene bushings on the chassis end.\u003c\/p\u003e\u003ch5\u003eAre they sold individually or in pairs?\u003c\/h5\u003e\u003cp\u003eThey are sold as a pair.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What vehicles do the QA1 5249 trailing arms fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They fit 1964-1967 GM A-body cars, including the Chevelle, El Camino, GTO, LeMans, Tempest, Skylark, Special, Gran Sport, 442, Cutlass, and Vista Cruiser.\"}}, {\"@type\": \"Question\", \"name\": \"What makes these arms adjustable?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The pinion angle can be adjusted by loosening the jam nuts and turning the arm without removing it from the vehicle.\"}}, {\"@type\": \"Question\", \"name\": \"What bushings do they use?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They use polyurethane bushings on the differential end and a spherical rod end with UHMW polyethylene bushings on the chassis end.\"}}, {\"@type\": \"Question\", \"name\": \"Are they sold individually or in pairs?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are sold as a pair.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846055075888,"sku":"QAP5249","price":386.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/628e4ff06d160e573fe1982d81b6e583.jpg?v=1739510373"},{"product_id":"qa1-heavy-duty-tie-rod-sleeve-kit-5-8-18-x-3-4in-qap5250","title":"QA1 Heavy Duty Tie Rod Sleeve Kit 5\/8-18 x 3.4in | 1964-1992 GM A\/G-Body \u0026 F-Body | 5250","description":"\u003cp\u003eThese heavy duty QA1 tie rod sleeves are manufactured from solid steel hex stock, then zinc plated for corrosion resistance and lasting appearance. They are stronger than stock OE split sleeves and are sold in pairs. Part 5250 fits a wide range of GM applications, including 1964-1970 A-Body, 1978-1987 A\/G-Body, and 1982-1992 Camaro and Firebird.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy duty tie rod sleeve kit\u003c\/li\u003e\n\u003cli\u003e5\/8-18 x 3.4in sleeve\u003c\/li\u003e\n\u003cli\u003e5\/8-18 thread, 4.15in long, with jam nuts\u003c\/li\u003e\n\u003cli\u003eSolid steel hex stock, zinc plated\u003c\/li\u003e\n\u003cli\u003eStronger than OE split sleeves\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003ePart number: 5250\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1965 Buick Gran Sport\u003c\/li\u003e\n\u003cli\u003e1966 Buick Gran Sport\u003c\/li\u003e\n\u003cli\u003e1967 Buick Gran Sport\u003c\/li\u003e\n\u003cli\u003e1978 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1979 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1980 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1981 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1982 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1983 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1984 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1985 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1986 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1987 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1988 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1964 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1965 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1966 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1967 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1968 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1969 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1970 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1964 Buick Special\u003c\/li\u003e\n\u003cli\u003e1965 Buick Special\u003c\/li\u003e\n\u003cli\u003e1966 Buick Special\u003c\/li\u003e\n\u003cli\u003e1967 Buick Special\u003c\/li\u003e\n\u003cli\u003e1968 Buick Special\u003c\/li\u003e\n\u003cli\u003e1969 Buick Special\u003c\/li\u003e\n\u003cli\u003e1982 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1983 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1984 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1985 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1986 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1987 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1988 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1989 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1990 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1991 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1992 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1964 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1965 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1966 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1967 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1968 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1969 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1970 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1964 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1965 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1966 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1967 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1968 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1969 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1970 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1978 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1979 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1980 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1981 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1982 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1983 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1984 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1985 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1986 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1987 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1978 Chevrolet Malibu\u003c\/li\u003e\n\u003cli\u003e1979 Chevrolet Malibu\u003c\/li\u003e\n\u003cli\u003e1980 Chevrolet Malibu\u003c\/li\u003e\n\u003cli\u003e1981 Chevrolet Malibu\u003c\/li\u003e\n\u003cli\u003e1982 Chevrolet Malibu\u003c\/li\u003e\n\u003cli\u003e1978 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1979 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1980 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1981 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1982 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1983 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1984 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1985 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1986 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1987 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1988 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1981 GMC Caballero\u003c\/li\u003e\n\u003cli\u003e1982 GMC Caballero\u003c\/li\u003e\n\u003cli\u003e1983 GMC Caballero\u003c\/li\u003e\n\u003cli\u003e1984 GMC Caballero\u003c\/li\u003e\n\u003cli\u003e1985 GMC Caballero\u003c\/li\u003e\n\u003cli\u003e1986 GMC Caballero\u003c\/li\u003e\n\u003cli\u003e1987 GMC Caballero\u003c\/li\u003e\n\u003cli\u003e1964 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1965 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1966 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1967 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1968 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1969 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1970 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1964 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1965 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1966 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1967 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1968 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1969 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1970 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1978 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1979 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1980 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1981 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1964 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1965 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1966 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1967 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1968 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1969 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1970 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1978 Pontiac Bonneville\u003c\/li\u003e\n\u003cli\u003e1979 Pontiac Bonneville\u003c\/li\u003e\n\u003cli\u003e1980 Pontiac Bonneville\u003c\/li\u003e\n\u003cli\u003e1981 Pontiac Bonneville\u003c\/li\u003e\n\u003cli\u003e1982 Pontiac Bonneville\u003c\/li\u003e\n\u003cli\u003e1983 Pontiac Bonneville\u003c\/li\u003e\n\u003cli\u003e1984 Pontiac Bonneville\u003c\/li\u003e\n\u003cli\u003e1985 Pontiac Bonneville\u003c\/li\u003e\n\u003cli\u003e1986 Pontiac Bonneville\u003c\/li\u003e\n\u003cli\u003e1987 Pontiac Bonneville\u003c\/li\u003e\n\u003cli\u003e1982 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1983 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1984 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1985 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1986 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1987 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1988 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1989 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1990 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1991 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1992 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1964 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1965 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1966 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1967 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1968 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1969 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1970 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1978 Pontiac Grand Am\u003c\/li\u003e\n\u003cli\u003e1979 Pontiac Grand Am\u003c\/li\u003e\n\u003cli\u003e1980 Pontiac Grand Am\u003c\/li\u003e\n\u003cli\u003e1978 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1979 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1980 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1981 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1982 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1983 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1984 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1985 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1986 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1987 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1964 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1965 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1966 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1967 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1968 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1969 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1970 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1978 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1979 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1980 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1981 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1964 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1965 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1966 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1967 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1968 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1969 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1970 Pontiac Tempest\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/5dbe4c5491e04ca61e82e7908b75d8f8.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat vehicles does the QA1 5250 tie rod sleeve kit fit?\u003c\/h5\u003e\u003cp\u003eIt fits a range of GM applications, including 1964-1970 A-Body, 1978-1987 A\/G-Body, and 1982-1992 Camaro and Firebird. See the vehicle applications list for confirmed fitment.\u003c\/p\u003e\u003ch5\u003eAre these sold in pairs?\u003c\/h5\u003e\u003cp\u003eYes. The 5250 tie rod sleeves are sold in pairs.\u003c\/p\u003e\u003ch5\u003eWhat are the sleeves made from?\u003c\/h5\u003e\u003cp\u003eThey are made from solid steel hex stock and zinc plated, making them stronger than OE split sleeves.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What vehicles does the QA1 5250 tie rod sleeve kit fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It fits a range of GM applications, including 1964-1970 A-Body, 1978-1987 A\/G-Body, and 1982-1992 Camaro and Firebird. See the vehicle applications list for confirmed fitment.\"}}, {\"@type\": \"Question\", \"name\": \"Are these sold in pairs?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The 5250 tie rod sleeves are sold in pairs.\"}}, {\"@type\": \"Question\", \"name\": \"What are the sleeves made from?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are made from solid steel hex stock and zinc plated, making them stronger than OE split sleeves.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846055141424,"sku":"QAP5250","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/081d099f07f8b2f657ef945261df4829.jpg?v=1739510374"},{"product_id":"qa1-heavy-duty-tie-rod-sleeve-kit-11-16-18-x-3-5in-qap5252","title":"QA1 Heavy Duty Tie Rod Sleeve Kit 11\/16-18 x 3.5in | 1965-1981 GM A\/F-Body \u0026 Ford Mustang | 5252","description":"\u003cp\u003eThese heavy duty QA1 tie rod sleeves are manufactured from solid steel hex stock, then zinc plated for corrosion resistance and lasting appearance. They are stronger than stock OE split sleeves and are sold in pairs. Part 5252 fits a range of GM A-Body and F-Body models and Ford Mustang, including 1970-1981 Camaro and Firebird and 1971-1977 A-Body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy duty tie rod sleeve kit\u003c\/li\u003e\n\u003cli\u003e11\/16-18 x 3.5in sleeve\u003c\/li\u003e\n\u003cli\u003e11\/16-18 thread, 4.28in long\u003c\/li\u003e\n\u003cli\u003eSolid steel hex stock, zinc plated\u003c\/li\u003e\n\u003cli\u003eStronger than OE split sleeves\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003ePart number: 5252\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1973 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1974 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1975 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1976 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1977 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1971 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1972 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1975 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1970 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1971 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1972 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1973 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1974 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1975 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1976 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1977 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1978 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1979 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1980 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1981 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1971 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1972 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1973 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1975 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1971 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1972 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1973 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1974 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1975 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1976 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1977 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1973 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1974 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1975 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1976 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1977 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1965 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1966 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1967 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1968 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1969 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1970 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1971 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1972 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1973 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1971 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1972 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1973 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1974 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1975 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1976 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1977 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1971 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1971 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1972 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1973 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1974 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1975 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1976 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1977 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1973 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1974 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1975 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1976 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1977 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1971 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1972 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1973 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1974 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1975 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1970 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1971 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1972 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1973 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1974 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1975 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1976 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1977 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1978 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1979 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1980 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1981 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1971 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1972 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1973 Pontiac Grand Am\u003c\/li\u003e\n\u003cli\u003e1974 Pontiac Grand Am\u003c\/li\u003e\n\u003cli\u003e1975 Pontiac Grand Am\u003c\/li\u003e\n\u003cli\u003e1973 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1974 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1975 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1976 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1977 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1971 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1972 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1973 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1974 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1975 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1976 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1977 Pontiac LeMans\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/5dbe4c5491e04ca61e82e7908b75d8f8.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat vehicles does the QA1 5252 tie rod sleeve kit fit?\u003c\/h5\u003e\u003cp\u003eIt fits a range of GM A-Body and F-Body models and Ford Mustang, including 1970-1981 Camaro and Firebird. See the vehicle applications list for confirmed fitment.\u003c\/p\u003e\u003ch5\u003eAre these sold in pairs?\u003c\/h5\u003e\u003cp\u003eYes. The 5252 tie rod sleeves are sold in pairs.\u003c\/p\u003e\u003ch5\u003eWhat are the sleeves made from?\u003c\/h5\u003e\u003cp\u003eThey are made from solid steel hex stock and zinc plated, making them stronger than OE split sleeves.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What vehicles does the QA1 5252 tie rod sleeve kit fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It fits a range of GM A-Body and F-Body models and Ford Mustang, including 1970-1981 Camaro and Firebird. See the vehicle applications list for confirmed fitment.\"}}, {\"@type\": \"Question\", \"name\": \"Are these sold in pairs?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The 5252 tie rod sleeves are sold in pairs.\"}}, {\"@type\": \"Question\", \"name\": \"What are the sleeves made from?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are made from solid steel hex stock and zinc plated, making them stronger than OE split sleeves.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846055206960,"sku":"QAP5252","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/081d099f07f8b2f657ef945261df4829_579429d3-c317-4fea-9e41-4b702c991b7b.jpg?v=1739510375"},{"product_id":"qa1-upper-adjustable-trailing-arms-qap5255","title":"QA1 Upper Adjustable Trailing Arms | 1979-2004 Ford Mustang \u0026 Mercury Capri | 5255","description":"\u003cp\u003eThe QA1 5255 upper adjustable trailing arms allow easy rear suspension adjustment for 1979-2004 Ford Mustang and 1979-1986 Mercury Capri. The pinion angle is set by loosening the jam nuts and turning the arm without removing it from the vehicle. They replace the soft OE differential bushings with polyurethane and use a spherical ball or rod end with UHMW polyethylene bushings on the chassis end to let the suspension move freely and eliminate bushing bind. The adjustable arms are zinc plated and anodized and are sold in pairs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: upper adjustable trailing arms, sold in pairs\u003c\/li\u003e\n\u003cli\u003eAdjustment: pinion angle, set on the vehicle via jam nuts\u003c\/li\u003e\n\u003cli\u003eDifferential end: polyurethane bushings\u003c\/li\u003e\n\u003cli\u003eChassis end: spherical ball or rod end with UHMW polyethylene bushings\u003c\/li\u003e\n\u003cli\u003eFinish: zinc plated and anodized\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003ePart number: 5255\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1979 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1980 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1981 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1982 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1983 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1984 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1985 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1986 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1987 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1988 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1989 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1990 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1991 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1992 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1993 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1994 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1995 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1996 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1997 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1998 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1999 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2000 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2001 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2002 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2003 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2004 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1979 Mercury Capri\u003c\/li\u003e\n\u003cli\u003e1980 Mercury Capri\u003c\/li\u003e\n\u003cli\u003e1981 Mercury Capri\u003c\/li\u003e\n\u003cli\u003e1982 Mercury Capri\u003c\/li\u003e\n\u003cli\u003e1983 Mercury Capri\u003c\/li\u003e\n\u003cli\u003e1984 Mercury Capri\u003c\/li\u003e\n\u003cli\u003e1985 Mercury Capri\u003c\/li\u003e\n\u003cli\u003e1986 Mercury Capri\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/0c3a6a20478e38712ca4b8a1e7c6473b.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat does the QA1 5255 trailing arm kit include?\u003c\/h5\u003e\u003cp\u003eThe kit includes two upper adjustable trailing arms with jam nuts, sold as a pair.\u003c\/p\u003e\u003ch5\u003eHow are these trailing arms adjusted?\u003c\/h5\u003e\u003cp\u003eThe pinion angle is set by loosening the jam nuts and turning the arm, which can be done without removing the arm from the vehicle.\u003c\/p\u003e\u003ch5\u003eWhat bushings do they use?\u003c\/h5\u003e\u003cp\u003eThey use polyurethane bushings on the differential end and a spherical ball or rod end with UHMW polyethylene bushings on the chassis end to eliminate bushing bind.\u003c\/p\u003e\u003ch5\u003eWhat vehicles does the 5255 kit fit?\u003c\/h5\u003e\u003cp\u003eThey fit 1979-2004 Ford Mustang and 1979-1986 Mercury Capri.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does the QA1 5255 trailing arm kit include?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The kit includes two upper adjustable trailing arms with jam nuts, sold as a pair.\"}}, {\"@type\": \"Question\", \"name\": \"How are these trailing arms adjusted?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The pinion angle is set by loosening the jam nuts and turning the arm, which can be done without removing the arm from the vehicle.\"}}, {\"@type\": \"Question\", \"name\": \"What bushings do they use?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They use polyurethane bushings on the differential end and a spherical ball or rod end with UHMW polyethylene bushings on the chassis end to eliminate bushing bind.\"}}, {\"@type\": \"Question\", \"name\": \"What vehicles does the 5255 kit fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They fit 1979-2004 Ford Mustang and 1979-1986 Mercury Capri.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846055272496,"sku":"QAP5255","price":386.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/628e4ff06d160e573fe1982d81b6e583_6d791f90-e1c1-4c50-b41e-e57492b4360c.jpg?v=1739510376"},{"product_id":"qa1-front-coil-over-conversion-kit-63-87-chevrolet-c10-qap52611-s650","title":"QA1 Front Coil-Over Conversion Kit | 63-87 Chevrolet C10 | Single Adjustable, 650 lbs\/in | 52611-S650","description":"\u003cp\u003eQA1's front coil-over conversion kit replaces the factory front suspension on 1963-1987 Chevrolet C10 trucks without the cost of a new chassis or full front end. It delivers adjustable ride height and up to 5in of drop when combined with popular drop spindles. The tubular upper and lower control arms add up to 7 degrees of caster for improved stability and driveability, and the kit uses single adjustable coil-over shocks with high travel springs. The kit includes upper and lower control arms, single adjustable shocks, high travel springs, an upper bracket, and all mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: front coil-over conversion kit\u003c\/li\u003e\n\u003cli\u003eFitment: 1963-1987 Chevrolet C10 (with upper control arm)\u003c\/li\u003e\n\u003cli\u003eShock valving: single adjustable\u003c\/li\u003e\n\u003cli\u003eSpring rate: 650 lbs\/in high travel springs\u003c\/li\u003e\n\u003cli\u003eRide height: adjustable, up to 5in drop with drop spindles\u003c\/li\u003e\n\u003cli\u003eGeometry: up to 7 degrees added caster\u003c\/li\u003e\n\u003cli\u003eIncludes: tubular upper and lower control arms, coil-over shocks, springs, upper bracket, hardware\u003c\/li\u003e\n\u003cli\u003eInstallation: bolt-in\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003ePart number: 52611-S650\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1975 Chevrolet C10\u003c\/li\u003e\n\u003cli\u003e1976 Chevrolet C10\u003c\/li\u003e\n\u003cli\u003e1977 Chevrolet C10\u003c\/li\u003e\n\u003cli\u003e1978 Chevrolet C10\u003c\/li\u003e\n\u003cli\u003e1979 Chevrolet C10\u003c\/li\u003e\n\u003cli\u003e1980 Chevrolet C10\u003c\/li\u003e\n\u003cli\u003e1981 Chevrolet C10\u003c\/li\u003e\n\u003cli\u003e1982 Chevrolet C10\u003c\/li\u003e\n\u003cli\u003e1983 Chevrolet C10\u003c\/li\u003e\n\u003cli\u003e1984 Chevrolet C10\u003c\/li\u003e\n\u003cli\u003e1985 Chevrolet C10\u003c\/li\u003e\n\u003cli\u003e1986 Chevrolet C10\u003c\/li\u003e\n\u003cli\u003e1963 Chevrolet C10 Panel\u003c\/li\u003e\n\u003cli\u003e1964 Chevrolet C10 Panel\u003c\/li\u003e\n\u003cli\u003e1965 Chevrolet C10 Panel\u003c\/li\u003e\n\u003cli\u003e1966 Chevrolet C10 Panel\u003c\/li\u003e\n\u003cli\u003e1967 Chevrolet C10 Panel\u003c\/li\u003e\n\u003cli\u003e1963 Chevrolet C10 Pickup\u003c\/li\u003e\n\u003cli\u003e1964 Chevrolet C10 Pickup\u003c\/li\u003e\n\u003cli\u003e1965 Chevrolet C10 Pickup\u003c\/li\u003e\n\u003cli\u003e1966 Chevrolet C10 Pickup\u003c\/li\u003e\n\u003cli\u003e1967 Chevrolet C10 Pickup\u003c\/li\u003e\n\u003cli\u003e1968 Chevrolet C10 Pickup\u003c\/li\u003e\n\u003cli\u003e1969 Chevrolet C10 Pickup\u003c\/li\u003e\n\u003cli\u003e1970 Chevrolet C10 Pickup\u003c\/li\u003e\n\u003cli\u003e1971 Chevrolet C10 Pickup\u003c\/li\u003e\n\u003cli\u003e1972 Chevrolet C10 Pickup\u003c\/li\u003e\n\u003cli\u003e1973 Chevrolet C10 Pickup\u003c\/li\u003e\n\u003cli\u003e1974 Chevrolet C10 Pickup\u003c\/li\u003e\n\u003cli\u003e1967 Chevrolet C10 Suburban\u003c\/li\u003e\n\u003cli\u003e1968 Chevrolet C10 Suburban\u003c\/li\u003e\n\u003cli\u003e1969 Chevrolet C10 Suburban\u003c\/li\u003e\n\u003cli\u003e1970 Chevrolet C10 Suburban\u003c\/li\u003e\n\u003cli\u003e1971 Chevrolet C10 Suburban\u003c\/li\u003e\n\u003cli\u003e1972 Chevrolet C10 Suburban\u003c\/li\u003e\n\u003cli\u003e1973 Chevrolet C10 Suburban\u003c\/li\u003e\n\u003cli\u003e1974 Chevrolet C10 Suburban\u003c\/li\u003e\n\u003cli\u003e1975 Chevrolet C10 Suburban\u003c\/li\u003e\n\u003cli\u003e1976 Chevrolet C10 Suburban\u003c\/li\u003e\n\u003cli\u003e1977 Chevrolet C10 Suburban\u003c\/li\u003e\n\u003cli\u003e1978 Chevrolet C10 Suburban\u003c\/li\u003e\n\u003cli\u003e1979 Chevrolet C10 Suburban\u003c\/li\u003e\n\u003cli\u003e1980 Chevrolet C10 Suburban\u003c\/li\u003e\n\u003cli\u003e1981 Chevrolet C10 Suburban\u003c\/li\u003e\n\u003cli\u003e1982 Chevrolet C10 Suburban\u003c\/li\u003e\n\u003cli\u003e1983 Chevrolet C10 Suburban\u003c\/li\u003e\n\u003cli\u003e1984 Chevrolet C10 Suburban\u003c\/li\u003e\n\u003cli\u003e1985 Chevrolet C10 Suburban\u003c\/li\u003e\n\u003cli\u003e1986 Chevrolet C10 Suburban\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/b6dc08f4353d9607abb82ed65e320beb.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat does this C10 front coil-over conversion kit include?\u003c\/h5\u003e\u003cp\u003eIt includes tubular upper and lower control arms, coil-over shocks, high travel springs, an upper mounting bracket, and all required hardware for a bolt-in installation.\u003c\/p\u003e\u003ch5\u003eHow much drop does this kit provide?\u003c\/h5\u003e\u003cp\u003eThe kit offers adjustable ride height and can achieve up to 5in of drop when paired with popular drop spindles.\u003c\/p\u003e\u003ch5\u003eWhat is the difference between single and double adjustable shocks?\u003c\/h5\u003e\u003cp\u003eSingle adjustable shocks tune rebound and compression together, while double adjustable shocks let rebound and compression be set independently for finer control.\u003c\/p\u003e\u003ch5\u003eDoes this kit improve suspension geometry?\u003c\/h5\u003e\u003cp\u003eYes. The upper and lower control arms together add up to 7 degrees of caster for added stability and driveability.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does this C10 front coil-over conversion kit include?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It includes tubular upper and lower control arms, coil-over shocks, high travel springs, an upper mounting bracket, and all required hardware for a bolt-in installation.\"}}, {\"@type\": \"Question\", \"name\": \"How much drop does this kit provide?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The kit offers adjustable ride height and can achieve up to 5in of drop when paired with popular drop spindles.\"}}, {\"@type\": \"Question\", \"name\": \"What is the difference between single and double adjustable shocks?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Single adjustable shocks tune rebound and compression together, while double adjustable shocks let rebound and compression be set independently for finer control.\"}}, {\"@type\": \"Question\", \"name\": \"Does this kit improve suspension geometry?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The upper and lower control arms together add up to 7 degrees of caster for added stability and driveability.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846055338032,"sku":"QAP52611-S650","price":2568.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/5b57fad7896d2b46d702e51d3f97895dL.jpg?v=1739510377"},{"product_id":"qa1-front-street-performance-upper-control-arm-kit-qap52718","title":"QA1 Front Street Performance Upper Control Arm Kit | 1970-1996 GM F\/A\/X\/B-Body | 52718","description":"\u003cp\u003eThe QA1 52718 street control arms are an upgrade for vehicles driven mainly for cruising and longer distances. They are configured for QA1 Pro Coil systems with double-shear lower mounting, and high-strength tubing with billet aluminum cross shafts keeps them light while improving strength and durability. Polyurethane bushings isolate road noise for a smoother ride while staying stiff enough for good handling, and the integrated QA1 ball joint is stronger than the factory piece for long service. The arms are robotically welded and powder coated. Used as a set they are designed to add 3 to 4 degrees of caster and 0.5 to 1 degree of negative camber, and about half of those figures when used on their own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: tubular street performance upper control arm kit, sold as a set\u003c\/li\u003e\n\u003cli\u003eBall joint: integrated QA1 ball joint, stronger than factory\u003c\/li\u003e\n\u003cli\u003eBushings: polyurethane to isolate road noise while keeping handling tight\u003c\/li\u003e\n\u003cli\u003eConstruction: high-strength tubing with billet aluminum cross shafts\u003c\/li\u003e\n\u003cli\u003eMounting: configured for QA1 Pro Coil systems with double-shear lower mounting\u003c\/li\u003e\n\u003cli\u003eAlignment: adds 3-4 degrees caster and 0.5 to 1 degree negative camber when used as a set\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003ePart number: 52718\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1975 Buick Apollo\u003c\/li\u003e\n\u003cli\u003e1973 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1974 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1975 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1976 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1977 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1991 Buick Roadmaster\u003c\/li\u003e\n\u003cli\u003e1992 Buick Roadmaster\u003c\/li\u003e\n\u003cli\u003e1993 Buick Roadmaster\u003c\/li\u003e\n\u003cli\u003e1994 Buick Roadmaster\u003c\/li\u003e\n\u003cli\u003e1995 Buick Roadmaster\u003c\/li\u003e\n\u003cli\u003e1996 Buick Roadmaster\u003c\/li\u003e\n\u003cli\u003e1975 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1976 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1977 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1978 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1979 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1970 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1971 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1972 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1973 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1974 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1975 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1976 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1977 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1978 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1979 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1980 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1981 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1978 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1979 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1980 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1981 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1982 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1983 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1984 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1985 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1986 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1987 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1988 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1989 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1990 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1991 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1992 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1993 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1994 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1995 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1996 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1973 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1973 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1974 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1975 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1976 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1977 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1978 Chevrolet Impala\u003c\/li\u003e\n\u003cli\u003e1979 Chevrolet Impala\u003c\/li\u003e\n\u003cli\u003e1980 Chevrolet Impala\u003c\/li\u003e\n\u003cli\u003e1981 Chevrolet Impala\u003c\/li\u003e\n\u003cli\u003e1982 Chevrolet Impala\u003c\/li\u003e\n\u003cli\u003e1983 Chevrolet Impala\u003c\/li\u003e\n\u003cli\u003e1984 Chevrolet Impala\u003c\/li\u003e\n\u003cli\u003e1985 Chevrolet Impala\u003c\/li\u003e\n\u003cli\u003e1994 Chevrolet Impala\u003c\/li\u003e\n\u003cli\u003e1995 Chevrolet Impala\u003c\/li\u003e\n\u003cli\u003e1996 Chevrolet Impala\u003c\/li\u003e\n\u003cli\u003e1973 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1974 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1975 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1976 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1977 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1975 Chevrolet Nova\u003c\/li\u003e\n\u003cli\u003e1976 Chevrolet Nova\u003c\/li\u003e\n\u003cli\u003e1977 Chevrolet Nova\u003c\/li\u003e\n\u003cli\u003e1978 Chevrolet Nova\u003c\/li\u003e\n\u003cli\u003e1979 Chevrolet Nova\u003c\/li\u003e\n\u003cli\u003e1973 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1974 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1975 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1976 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1977 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1978 Oldsmobile Custom Cruiser\u003c\/li\u003e\n\u003cli\u003e1979 Oldsmobile Custom Cruiser\u003c\/li\u003e\n\u003cli\u003e1980 Oldsmobile Custom Cruiser\u003c\/li\u003e\n\u003cli\u003e1981 Oldsmobile Custom Cruiser\u003c\/li\u003e\n\u003cli\u003e1982 Oldsmobile Custom Cruiser\u003c\/li\u003e\n\u003cli\u003e1983 Oldsmobile Custom Cruiser\u003c\/li\u003e\n\u003cli\u003e1984 Oldsmobile Custom Cruiser\u003c\/li\u003e\n\u003cli\u003e1985 Oldsmobile Custom Cruiser\u003c\/li\u003e\n\u003cli\u003e1973 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1974 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1975 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1976 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1977 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1973 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1974 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1975 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1976 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1977 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1973 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1974 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1975 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1970 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1971 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1972 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1973 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1974 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1975 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1976 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1977 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1978 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1979 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1980 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1981 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1973 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1974 Pontiac Grand Am\u003c\/li\u003e\n\u003cli\u003e1975 Pontiac Grand Am\u003c\/li\u003e\n\u003cli\u003e1973 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1974 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1975 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1976 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1977 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1973 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1974 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1975 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1976 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1977 Pontiac LeMans\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat is the QA1 52718 control arm kit for?\u003c\/h5\u003e\u003cp\u003eIt is a street-oriented upgrade for cruising and longer-distance driving, with polyurethane bushings that isolate road noise while keeping handling tight.\u003c\/p\u003e\u003ch5\u003eWhat ball joint does it use?\u003c\/h5\u003e\u003cp\u003eIt uses an integrated QA1 ball joint that is stronger than the factory ball joint for long service.\u003c\/p\u003e\u003ch5\u003eHow much alignment change does it add?\u003c\/h5\u003e\u003cp\u003eUsed as a set the arms are designed to add 3 to 4 degrees of caster and 0.5 to 1 degree of negative camber, and about half of those figures when used on their own.\u003c\/p\u003e\u003ch5\u003eWhat vehicles does the 52718 upper control arm kit fit?\u003c\/h5\u003e\u003cp\u003eIt fits 1970-1996 GM F-body, A-body, X-body and B-body cars including the Camaro, Firebird, Nova, Caprice, Impala, Monte Carlo, Cutlass and Roadmaster.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is the QA1 52718 control arm kit for?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is a street-oriented upgrade for cruising and longer-distance driving, with polyurethane bushings that isolate road noise while keeping handling tight.\"}}, {\"@type\": \"Question\", \"name\": \"What ball joint does it use?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It uses an integrated QA1 ball joint that is stronger than the factory ball joint for long service.\"}}, {\"@type\": \"Question\", \"name\": \"How much alignment change does it add?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Used as a set the arms are designed to add 3 to 4 degrees of caster and 0.5 to 1 degree of negative camber, and about half of those figures when used on their own.\"}}, {\"@type\": \"Question\", \"name\": \"What vehicles does the 52718 upper control arm kit fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It fits 1970-1996 GM F-body, A-body, X-body and B-body cars including the Camaro, Firebird, Nova, Caprice, Impala, Monte Carlo, Cutlass and Roadmaster.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846055534640,"sku":"QAP52718","price":635.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/dfa4ecf9f5a73605985dcf9209fbe85fL.jpg?v=1739510379"},{"product_id":"qa1-street-performance-front-lower-control-arm-kit-qap52720","title":"QA1 Street Performance Front Lower Control Arm Kit | 1970-1996 GM F\/A\/X\/B-Body | 52720","description":"\u003cp\u003eQA1 Street Performance lower control arms are built for vehicles used mainly for cruising and longer drives. They are configured for QA1 Pro Coil systems with a double shear lower mount. High strength tubing paired with billet aluminum cross shafts keeps the arms among the lightest available while improving strength and durability. The arms are robotically welded and powder coated. Polyurethane bushings isolate road noise for a smoother ride while staying firm enough for good handling, and a high quality integrated ball joint that is stronger than the factory unit is included for long service life. Used together as a set the arms add about 3 to 4 degrees of caster and 0.5 to 1 degree of negative camber; used individually they add roughly half of those figures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFront lower control arms, street performance\u003c\/li\u003e\n\u003cli\u003eConfigured for QA1 Pro Coil systems with double shear lower mount\u003c\/li\u003e\n\u003cli\u003eHigh strength tubing with billet aluminum cross shafts\u003c\/li\u003e\n\u003cli\u003eDesigned for use with QA1 Ultimate Ball Joints, integrated ball joint included\u003c\/li\u003e\n\u003cli\u003ePolyurethane bushings for low friction and reduced road noise\u003c\/li\u003e\n\u003cli\u003eAdds about 3 to 4 degrees caster and 0.5 to 1 degree negative camber as a set\u003c\/li\u003e\n\u003cli\u003eRobotically welded and powder coated\u003c\/li\u003e\n\u003cli\u003eEasy bolt-in installation\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003ePart number: 52720\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1975 Buick Apollo\u003c\/li\u003e\n\u003cli\u003e1973 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1974 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1975 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1976 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1977 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1991 Buick Roadmaster\u003c\/li\u003e\n\u003cli\u003e1992 Buick Roadmaster\u003c\/li\u003e\n\u003cli\u003e1993 Buick Roadmaster\u003c\/li\u003e\n\u003cli\u003e1994 Buick Roadmaster\u003c\/li\u003e\n\u003cli\u003e1995 Buick Roadmaster\u003c\/li\u003e\n\u003cli\u003e1996 Buick Roadmaster\u003c\/li\u003e\n\u003cli\u003e1975 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1976 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1977 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1978 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1979 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1973 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1974 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1975 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1976 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1977 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1978 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1979 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1980 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1981 Chevrolet Camaro\u003c\/li\u003e\n\u003cli\u003e1978 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1979 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1980 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1981 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1982 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1983 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1984 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1985 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1986 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1987 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1988 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1989 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1990 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1991 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1992 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1993 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1994 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1995 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1996 Chevrolet Caprice\u003c\/li\u003e\n\u003cli\u003e1973 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1973 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1974 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1975 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1976 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1977 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1978 Chevrolet Impala\u003c\/li\u003e\n\u003cli\u003e1979 Chevrolet Impala\u003c\/li\u003e\n\u003cli\u003e1980 Chevrolet Impala\u003c\/li\u003e\n\u003cli\u003e1981 Chevrolet Impala\u003c\/li\u003e\n\u003cli\u003e1982 Chevrolet Impala\u003c\/li\u003e\n\u003cli\u003e1983 Chevrolet Impala\u003c\/li\u003e\n\u003cli\u003e1984 Chevrolet Impala\u003c\/li\u003e\n\u003cli\u003e1985 Chevrolet Impala\u003c\/li\u003e\n\u003cli\u003e1994 Chevrolet Impala\u003c\/li\u003e\n\u003cli\u003e1995 Chevrolet Impala\u003c\/li\u003e\n\u003cli\u003e1996 Chevrolet Impala\u003c\/li\u003e\n\u003cli\u003e1973 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1974 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1975 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1976 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1977 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1975 Chevrolet Nova\u003c\/li\u003e\n\u003cli\u003e1976 Chevrolet Nova\u003c\/li\u003e\n\u003cli\u003e1977 Chevrolet Nova\u003c\/li\u003e\n\u003cli\u003e1978 Chevrolet Nova\u003c\/li\u003e\n\u003cli\u003e1979 Chevrolet Nova\u003c\/li\u003e\n\u003cli\u003e1973 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1974 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1975 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1976 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1977 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1978 Oldsmobile Custom Cruiser\u003c\/li\u003e\n\u003cli\u003e1979 Oldsmobile Custom Cruiser\u003c\/li\u003e\n\u003cli\u003e1980 Oldsmobile Custom Cruiser\u003c\/li\u003e\n\u003cli\u003e1981 Oldsmobile Custom Cruiser\u003c\/li\u003e\n\u003cli\u003e1982 Oldsmobile Custom Cruiser\u003c\/li\u003e\n\u003cli\u003e1983 Oldsmobile Custom Cruiser\u003c\/li\u003e\n\u003cli\u003e1984 Oldsmobile Custom Cruiser\u003c\/li\u003e\n\u003cli\u003e1985 Oldsmobile Custom Cruiser\u003c\/li\u003e\n\u003cli\u003e1986 Oldsmobile Custom Cruiser\u003c\/li\u003e\n\u003cli\u003e1987 Oldsmobile Custom Cruiser\u003c\/li\u003e\n\u003cli\u003e1988 Oldsmobile Custom Cruiser\u003c\/li\u003e\n\u003cli\u003e1989 Oldsmobile Custom Cruiser\u003c\/li\u003e\n\u003cli\u003e1990 Oldsmobile Custom Cruiser\u003c\/li\u003e\n\u003cli\u003e1991 Oldsmobile Custom Cruiser\u003c\/li\u003e\n\u003cli\u003e1992 Oldsmobile Custom Cruiser\u003c\/li\u003e\n\u003cli\u003e1973 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1974 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1975 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1976 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1977 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1973 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1974 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1975 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1976 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1977 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1978 Oldsmobile Delta 88\u003c\/li\u003e\n\u003cli\u003e1979 Oldsmobile Delta 88\u003c\/li\u003e\n\u003cli\u003e1980 Oldsmobile Delta 88\u003c\/li\u003e\n\u003cli\u003e1981 Oldsmobile Delta 88\u003c\/li\u003e\n\u003cli\u003e1982 Oldsmobile Delta 88\u003c\/li\u003e\n\u003cli\u003e1983 Oldsmobile Delta 88\u003c\/li\u003e\n\u003cli\u003e1984 Oldsmobile Delta 88\u003c\/li\u003e\n\u003cli\u003e1985 Oldsmobile Delta 88\u003c\/li\u003e\n\u003cli\u003e1975 Oldsmobile Omega\u003c\/li\u003e\n\u003cli\u003e1976 Oldsmobile Omega\u003c\/li\u003e\n\u003cli\u003e1977 Oldsmobile Omega\u003c\/li\u003e\n\u003cli\u003e1978 Oldsmobile Omega\u003c\/li\u003e\n\u003cli\u003e1979 Oldsmobile Omega\u003c\/li\u003e\n\u003cli\u003e1973 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1974 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1975 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1978 Pontiac Bonneville\u003c\/li\u003e\n\u003cli\u003e1979 Pontiac Bonneville\u003c\/li\u003e\n\u003cli\u003e1980 Pontiac Bonneville\u003c\/li\u003e\n\u003cli\u003e1981 Pontiac Bonneville\u003c\/li\u003e\n\u003cli\u003e1978 Pontiac Catalina\u003c\/li\u003e\n\u003cli\u003e1979 Pontiac Catalina\u003c\/li\u003e\n\u003cli\u003e1980 Pontiac Catalina\u003c\/li\u003e\n\u003cli\u003e1981 Pontiac Catalina\u003c\/li\u003e\n\u003cli\u003e1970 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1971 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1972 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1973 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1974 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1975 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1976 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1977 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1978 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1979 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1980 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1981 Pontiac Firebird\u003c\/li\u003e\n\u003cli\u003e1973 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1974 Pontiac Grand Am\u003c\/li\u003e\n\u003cli\u003e1975 Pontiac Grand Am\u003c\/li\u003e\n\u003cli\u003e1973 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1974 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1975 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1976 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1977 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1973 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1974 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1975 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1976 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1977 Pontiac LeMans\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat does the QA1 52720 control arm kit fit?\u003c\/h5\u003e\u003cp\u003eIt fits a range of 1970-1996 GM F-Body, A-Body, X-Body and B-Body cars. See the Vehicle Applications list for the specific models and years.\u003c\/p\u003e\u003ch5\u003eAre the 52720 control arms front or rear?\u003c\/h5\u003e\u003cp\u003eThey are front lower control arms.\u003c\/p\u003e\u003ch5\u003eWhat alignment changes do the 52720 control arms provide?\u003c\/h5\u003e\u003cp\u003eUsed together as a set they add about 3 to 4 degrees of caster and 0.5 to 1 degree of negative camber. Used individually they add roughly half of those amounts.\u003c\/p\u003e\u003ch5\u003eWhat bushings do the 52720 control arms use?\u003c\/h5\u003e\u003cp\u003eThey use polyurethane bushings, which isolate road noise while staying firm enough for good handling.\u003c\/p\u003e\u003ch5\u003eIs a ball joint included with the 52720 kit?\u003c\/h5\u003e\u003cp\u003eYes. A high quality integrated ball joint that is stronger than the factory unit is included, and the arms are designed for use with QA1 Ultimate Ball Joints.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does the QA1 52720 control arm kit fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It fits a range of 1970-1996 GM F-Body, A-Body, X-Body and B-Body cars. See the Vehicle Applications list for the specific models and years.\"}}, {\"@type\": \"Question\", \"name\": \"Are the 52720 control arms front or rear?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are front lower control arms.\"}}, {\"@type\": \"Question\", \"name\": \"What alignment changes do the 52720 control arms provide?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Used together as a set they add about 3 to 4 degrees of caster and 0.5 to 1 degree of negative camber. Used individually they add roughly half of those amounts.\"}}, {\"@type\": \"Question\", \"name\": \"What bushings do the 52720 control arms use?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They use polyurethane bushings, which isolate road noise while staying firm enough for good handling.\"}}, {\"@type\": \"Question\", \"name\": \"Is a ball joint included with the 52720 kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. A high quality integrated ball joint that is stronger than the factory unit is included, and the arms are designed for use with QA1 Ultimate Ball Joints.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846055600176,"sku":"QAP52720","price":854.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/78322b608982dd0146b2f36c2ea2633bL.jpg?v=1739510380"},{"product_id":"qa1-front-street-performance-upper-control-arm-kit-qap52722","title":"QA1 Front Street Performance Upper Control Arm Kit | 1964-1972 GM A\/G-Body | 52722","description":"\u003cp\u003eThe QA1 52722 street control arms are an upgrade for vehicles driven mainly for cruising and longer distances. They are configured for QA1 Pro Coil systems with double-shear lower mounting, and high-strength tubing with billet aluminum cross shafts keeps them light while improving strength and durability. Polyurethane bushings isolate road noise for a smoother ride while staying stiff enough for good handling, and the integrated QA1 ball joint is stronger than the factory piece for long service. The arms are robotically welded and powder coated. Used as a set they are designed to add 3 to 4 degrees of caster and 0.5 to 1 degree of negative camber, and about half of those figures when used on their own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: tubular street performance upper control arm kit, sold as a set\u003c\/li\u003e\n\u003cli\u003eBall joint: integrated QA1 ball joint, stronger than factory\u003c\/li\u003e\n\u003cli\u003eBushings: polyurethane to isolate road noise while keeping handling tight\u003c\/li\u003e\n\u003cli\u003eConstruction: high-strength tubing with billet aluminum cross shafts\u003c\/li\u003e\n\u003cli\u003eMounting: configured for QA1 Pro Coil systems with double-shear lower mounting\u003c\/li\u003e\n\u003cli\u003eAlignment: adds 3-4 degrees caster and 0.5 to 1 degree negative camber when used as a set\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003ePart number: 52722\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1964 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1965 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1966 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1967 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1968 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1969 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1970 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1971 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1972 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1964 Buick Special\u003c\/li\u003e\n\u003cli\u003e1965 Buick Special\u003c\/li\u003e\n\u003cli\u003e1966 Buick Special\u003c\/li\u003e\n\u003cli\u003e1967 Buick Special\u003c\/li\u003e\n\u003cli\u003e1968 Buick Special\u003c\/li\u003e\n\u003cli\u003e1969 Buick Special\u003c\/li\u003e\n\u003cli\u003e1964 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1965 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1966 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1967 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1968 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1969 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1970 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1971 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1972 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1964 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1965 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1966 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1967 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1968 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1969 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1970 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1971 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1972 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1970 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1971 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1972 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1964 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1965 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1966 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1967 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1968 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1969 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1970 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1971 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1964 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1965 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1966 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1967 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1968 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1969 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1970 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1971 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1972 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1967 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1968 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1969 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1970 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1971 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1972 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1964 Oldsmobile F85\u003c\/li\u003e\n\u003cli\u003e1965 Oldsmobile F85\u003c\/li\u003e\n\u003cli\u003e1966 Oldsmobile F85\u003c\/li\u003e\n\u003cli\u003e1967 Oldsmobile F85\u003c\/li\u003e\n\u003cli\u003e1970 Oldsmobile F85\u003c\/li\u003e\n\u003cli\u003e1971 Oldsmobile F85\u003c\/li\u003e\n\u003cli\u003e1972 Oldsmobile F85\u003c\/li\u003e\n\u003cli\u003e1964 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1965 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1966 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1967 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1968 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1969 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1970 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1971 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1972 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1964 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1965 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1966 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1967 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1968 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1969 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1970 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1971 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1972 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1969 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1970 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1971 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1972 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1964 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1965 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1966 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1967 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1968 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1969 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1970 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1971 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1972 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1964 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1965 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1966 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1967 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1968 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1969 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1970 Pontiac Tempest\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat is the QA1 52722 control arm kit for?\u003c\/h5\u003e\u003cp\u003eIt is a street-oriented upgrade for cruising and longer-distance driving, with polyurethane bushings that isolate road noise while keeping handling tight.\u003c\/p\u003e\u003ch5\u003eWhat ball joint does it use?\u003c\/h5\u003e\u003cp\u003eIt uses an integrated QA1 ball joint that is stronger than the factory ball joint for long service.\u003c\/p\u003e\u003ch5\u003eHow much alignment change does it add?\u003c\/h5\u003e\u003cp\u003eUsed as a set the arms are designed to add 3 to 4 degrees of caster and 0.5 to 1 degree of negative camber, and about half of those figures when used on their own.\u003c\/p\u003e\u003ch5\u003eWhat vehicles does the 52722 upper control arm kit fit?\u003c\/h5\u003e\u003cp\u003eIt fits 1964-1972 GM A\/G-body cars including the Chevelle, El Camino, Monte Carlo, GTO, Cutlass, 442, F85, LeMans, Tempest, Skylark and Special.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is the QA1 52722 control arm kit for?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is a street-oriented upgrade for cruising and longer-distance driving, with polyurethane bushings that isolate road noise while keeping handling tight.\"}}, {\"@type\": \"Question\", \"name\": \"What ball joint does it use?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It uses an integrated QA1 ball joint that is stronger than the factory ball joint for long service.\"}}, {\"@type\": \"Question\", \"name\": \"How much alignment change does it add?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Used as a set the arms are designed to add 3 to 4 degrees of caster and 0.5 to 1 degree of negative camber, and about half of those figures when used on their own.\"}}, {\"@type\": \"Question\", \"name\": \"What vehicles does the 52722 upper control arm kit fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It fits 1964-1972 GM A\/G-body cars including the Chevelle, El Camino, Monte Carlo, GTO, Cutlass, 442, F85, LeMans, Tempest, Skylark and Special.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846055698480,"sku":"QAP52722","price":635.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/3ae6c27bd089b8fe5f9dba9de4c5ee04L.jpg?v=1739510381"},{"product_id":"qa1-street-performance-front-lower-control-arm-kit-qap52766","title":"QA1 Street Performance Front Lower Control Arm Kit | 1982-2004 Chevrolet S-10 \u0026 GMC Sonoma | 52766","description":"\u003cp\u003eQA1 Street Performance lower control arms are an upgrade for 1982-2004 Chevrolet S-10 \u0026amp; GMC Sonoma vehicles driven mainly for cruising and longer distances. The arms combine high-strength steel tubing with billet aluminum cross shafts for a light assembly with improved strength and durability, and they are configured for QA1 Pro Coil systems with double-shear lower mounting. Greasable polyurethane bushings isolate road noise for a smoother ride while staying stiff enough for sharper handling, and the integrated QA1 ball joint is stronger than the factory unit for long service life. The arms are robotically welded and powder coated. When the upper and lower arms are installed together they add roughly 3 to 4 degrees of caster and 0.5 to 1 degree of negative camber, correcting outdated front end geometry.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFront lower tubular control arm kit\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel tubing with billet aluminum cross shafts\u003c\/li\u003e\n\u003cli\u003eIntegrated QA1 Ultimate low-friction ball joint, stronger than factory\u003c\/li\u003e\n\u003cli\u003eGreasable polyurethane bushings\u003c\/li\u003e\n\u003cli\u003eRobotically welded and powder-coated finish\u003c\/li\u003e\n\u003cli\u003eConfigured for QA1 Pro Coil systems with double-shear lower mounting\u003c\/li\u003e\n\u003cli\u003eAdds about 3 to 4 degrees caster and 0.5 to 1 degree negative camber when upper and lower arms are used together\u003c\/li\u003e\n\u003cli\u003eBolt-in installation\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003ePart number: 52766\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1982 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1983 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1984 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1985 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1986 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1987 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1988 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1989 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1990 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1991 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1992 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1993 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1994 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1995 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1996 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1997 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1998 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1999 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e2000 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e2001 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e2002 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e2003 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e2004 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1991 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e1992 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e1993 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e1994 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e1995 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e1996 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e1997 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e1998 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e1999 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e2000 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e2001 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e2002 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e2003 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e2004 GMC Sonoma\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eAre these direct bolt-in control arms?\u003c\/h5\u003e\u003cp\u003eYes. The kit is designed for bolt-in installation on the listed applications and corrects outdated factory front-end geometry.\u003c\/p\u003e\u003ch5\u003eWhat bushings do these control arms use?\u003c\/h5\u003e\u003cp\u003eThey use greasable polyurethane bushings, which isolate road noise for a smoother ride while remaining stiffer than factory rubber for improved handling.\u003c\/p\u003e\u003ch5\u003eDo these arms work with coil-over systems?\u003c\/h5\u003e\u003cp\u003eYes. They are configured for QA1 Pro Coil systems and use a double-shear lower mounting.\u003c\/p\u003e\u003ch5\u003eHow much alignment change do they add?\u003c\/h5\u003e\u003cp\u003eInstalled as an upper and lower pair, the arms add approximately 3 to 4 degrees of caster and 0.5 to 1 degree of negative camber. Used on their own, each adds roughly half of those figures.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Are these direct bolt-in control arms?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The kit is designed for bolt-in installation on the listed applications and corrects outdated factory front-end geometry.\"}}, {\"@type\": \"Question\", \"name\": \"What bushings do these control arms use?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They use greasable polyurethane bushings, which isolate road noise for a smoother ride while remaining stiffer than factory rubber for improved handling.\"}}, {\"@type\": \"Question\", \"name\": \"Do these arms work with coil-over systems?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. They are configured for QA1 Pro Coil systems and use a double-shear lower mounting.\"}}, {\"@type\": \"Question\", \"name\": \"How much alignment change do they add?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Installed as an upper and lower pair, the arms add approximately 3 to 4 degrees of caster and 0.5 to 1 degree of negative camber. Used on their own, each adds roughly half of those figures.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846055731248,"sku":"QAP52766","price":854.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/1ee0988d28eeaf81c0874e2f1c7bf391L.jpg?v=1739510382"},{"product_id":"qa1-street-performance-front-upper-control-arm-kit-qap52767","title":"QA1 Street Performance Front Upper Control Arm Kit | 1982-2004 Chevrolet S-10 \u0026 GMC Sonoma | 52767","description":"\u003cp\u003eQA1 Street Performance upper control arms are an upgrade for 1982-2004 Chevrolet S-10 \u0026amp; GMC Sonoma vehicles driven mainly for cruising and longer distances. The arms combine high-strength steel tubing with billet aluminum cross shafts for a light assembly with improved strength and durability, and they are configured for QA1 Pro Coil systems with double-shear lower mounting. Greasable polyurethane bushings isolate road noise for a smoother ride while staying stiff enough for sharper handling, and the integrated QA1 ball joint is stronger than the factory unit for long service life. The arms are robotically welded and powder coated. When the upper and lower arms are installed together they add roughly 3 to 4 degrees of caster and 0.5 to 1 degree of negative camber, correcting outdated front end geometry.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFront upper tubular control arm kit\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel tubing with billet aluminum cross shafts\u003c\/li\u003e\n\u003cli\u003eIntegrated QA1 Ultimate low-friction ball joint, stronger than factory\u003c\/li\u003e\n\u003cli\u003eGreasable polyurethane bushings\u003c\/li\u003e\n\u003cli\u003eRobotically welded and powder-coated finish\u003c\/li\u003e\n\u003cli\u003eConfigured for QA1 Pro Coil systems with double-shear lower mounting\u003c\/li\u003e\n\u003cli\u003eAdds about 3 to 4 degrees caster and 0.5 to 1 degree negative camber when upper and lower arms are used together\u003c\/li\u003e\n\u003cli\u003eBolt-in installation\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003ePart number: 52767\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1982 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1983 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1984 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1985 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1986 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1987 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1988 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1989 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1990 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1991 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1992 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1993 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1994 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1995 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1996 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1997 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1998 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1999 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e2000 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e2001 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e2002 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e2003 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e2004 Chevrolet S10\u003c\/li\u003e\n\u003cli\u003e1991 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e1992 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e1993 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e1994 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e1995 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e1996 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e1997 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e1998 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e1999 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e2000 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e2001 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e2002 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e2003 GMC Sonoma\u003c\/li\u003e\n\u003cli\u003e2004 GMC Sonoma\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eAre these direct bolt-in control arms?\u003c\/h5\u003e\u003cp\u003eYes. The kit is designed for bolt-in installation on the listed applications and corrects outdated factory front-end geometry.\u003c\/p\u003e\u003ch5\u003eWhat bushings do these control arms use?\u003c\/h5\u003e\u003cp\u003eThey use greasable polyurethane bushings, which isolate road noise for a smoother ride while remaining stiffer than factory rubber for improved handling.\u003c\/p\u003e\u003ch5\u003eDo these arms work with coil-over systems?\u003c\/h5\u003e\u003cp\u003eYes. They are configured for QA1 Pro Coil systems and use a double-shear lower mounting.\u003c\/p\u003e\u003ch5\u003eHow much alignment change do they add?\u003c\/h5\u003e\u003cp\u003eInstalled as an upper and lower pair, the arms add approximately 3 to 4 degrees of caster and 0.5 to 1 degree of negative camber. Used on their own, each adds roughly half of those figures.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Are these direct bolt-in control arms?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The kit is designed for bolt-in installation on the listed applications and corrects outdated factory front-end geometry.\"}}, {\"@type\": \"Question\", \"name\": \"What bushings do these control arms use?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They use greasable polyurethane bushings, which isolate road noise for a smoother ride while remaining stiffer than factory rubber for improved handling.\"}}, {\"@type\": \"Question\", \"name\": \"Do these arms work with coil-over systems?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. They are configured for QA1 Pro Coil systems and use a double-shear lower mounting.\"}}, {\"@type\": \"Question\", \"name\": \"How much alignment change do they add?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Installed as an upper and lower pair, the arms add approximately 3 to 4 degrees of caster and 0.5 to 1 degree of negative camber. Used on their own, each adds roughly half of those figures.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846055796784,"sku":"QAP52767","price":635.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/985173237bb15dc673ff6334ba043f45L.jpg?v=1739510382"},{"product_id":"qa1-front-sway-bar-qap52865","title":"QA1 Front Sway Bar | 65-79 Ford F100 \u0026 F150 1-3\/8in | 52865","description":"\u003cp\u003eThis QA1 front sway bar adds a new level of stability to 1965-1979 Ford F-100 and 1975-1979 F-150 trucks. It is precision CNC formed for proper fitment and bolt-on installation and is manufactured from lightweight hollow 4130 chromoly steel for strength and durability. It includes greasable polyurethane bushings and high-quality plated hardware, and is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePosition: Front sway bar\u003c\/li\u003e\n\u003cli\u003eDiameter: 1-3\/8in\u003c\/li\u003e\n\u003cli\u003eMaterial: Hollow 4130 chromoly steel\u003c\/li\u003e\n\u003cli\u003eFinish: Black powder coat\u003c\/li\u003e\n\u003cli\u003eIncludes: Greasable polyurethane bushings and plated hardware\u003c\/li\u003e\n\u003cli\u003eInstallation: Bolt-on\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003ePart number: 52865\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1965 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1966 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1967 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1968 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1969 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1970 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1971 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1972 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1973 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1974 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1975 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1976 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1977 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1978 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1979 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1975 Ford F-150\u003c\/li\u003e\n\u003cli\u003e1976 Ford F-150\u003c\/li\u003e\n\u003cli\u003e1977 Ford F-150\u003c\/li\u003e\n\u003cli\u003e1978 Ford F-150\u003c\/li\u003e\n\u003cli\u003e1979 Ford F-150\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat does the QA1 52865 front sway bar fit?\u003c\/h5\u003e\u003cp\u003eIt fits 1965-1979 Ford F-100 trucks and 1975-1979 Ford F-150 trucks.\u003c\/p\u003e\u003ch5\u003eIs it a bolt-on installation?\u003c\/h5\u003e\u003cp\u003eYes. It is precision CNC formed for proper fitment and bolt-on installation.\u003c\/p\u003e\u003ch5\u003eWhat is it made from?\u003c\/h5\u003e\u003cp\u003eIt is made from lightweight hollow 4130 chromoly steel and includes greasable polyurethane bushings and plated hardware.\u003c\/p\u003e\u003ch5\u003eWhere is it made?\u003c\/h5\u003e\u003cp\u003eQA1 suspension parts are made in the USA.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What does the QA1 52865 front sway bar fit?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It fits 1965-1979 Ford F-100 trucks and 1975-1979 Ford F-150 trucks.\"}},{\"@type\":\"Question\",\"name\":\"Is it a bolt-on installation?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. It is precision CNC formed for proper fitment and bolt-on installation.\"}},{\"@type\":\"Question\",\"name\":\"What is it made from?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is made from lightweight hollow 4130 chromoly steel and includes greasable polyurethane bushings and plated hardware.\"}},{\"@type\":\"Question\",\"name\":\"Where is it made?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"QA1 suspension parts are made in the USA.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846055862320,"sku":"QAP52865","price":514.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/ac32cff7d44881453fd1119261dffdfcL.jpg?v=1739510383"},{"product_id":"qa1-rear-sway-bar-qap52866","title":"QA1 Rear Sway Bar | 65-72 Ford F100 1-1\/4in | 52866","description":"\u003cp\u003eThis QA1 rear sway bar adds a new level of stability to 1965-1972 Ford F-100 trucks. It is precision CNC formed for proper fitment and bolt-on installation and is manufactured from lightweight hollow 4130 chromoly steel for strength and durability. It includes greasable polyurethane bushings and high-quality plated hardware, and is made in the USA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePosition: Rear sway bar\u003c\/li\u003e\n\u003cli\u003eDiameter: 1-1\/4in\u003c\/li\u003e\n\u003cli\u003eMaterial: Hollow 4130 chromoly steel\u003c\/li\u003e\n\u003cli\u003eFinish: Black powder coat\u003c\/li\u003e\n\u003cli\u003eIncludes: Greasable polyurethane bushings and plated hardware\u003c\/li\u003e\n\u003cli\u003eInstallation: Bolt-on\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003ePart number: 52866\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1965 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1966 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1967 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1968 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1969 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1970 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1971 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1972 Ford F-100\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/d2c8fd6948201773821d85f48236b135.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat does the QA1 52866 rear sway bar fit?\u003c\/h5\u003e\u003cp\u003eIt fits 1965-1972 Ford F-100 trucks.\u003c\/p\u003e\u003ch5\u003eIs it a bolt-on installation?\u003c\/h5\u003e\u003cp\u003eYes. It is precision CNC formed for proper fitment and bolt-on installation.\u003c\/p\u003e\u003ch5\u003eWhat is it made from?\u003c\/h5\u003e\u003cp\u003eIt is made from lightweight hollow 4130 chromoly steel and includes greasable polyurethane bushings and plated hardware.\u003c\/p\u003e\u003ch5\u003eWhere is it made?\u003c\/h5\u003e\u003cp\u003eQA1 suspension parts are made in the USA.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What does the QA1 52866 rear sway bar fit?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It fits 1965-1972 Ford F-100 trucks.\"}},{\"@type\":\"Question\",\"name\":\"Is it a bolt-on installation?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. It is precision CNC formed for proper fitment and bolt-on installation.\"}},{\"@type\":\"Question\",\"name\":\"What is it made from?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is made from lightweight hollow 4130 chromoly steel and includes greasable polyurethane bushings and plated hardware.\"}},{\"@type\":\"Question\",\"name\":\"Where is it made?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"QA1 suspension parts are made in the USA.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846055993392,"sku":"QAP52866","price":514.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/0117c047148f01f13d783107d8f9439b.jpg?v=1739510385"},{"product_id":"qa1-front-rear-sway-bar-kit-qap52873","title":"QA1 Front \u0026 Rear Sway Bar Kit | 64-72 GM A-Body 1-1\/4in \u0026 1in | 52873","description":"\u003cp\u003eThis QA1 kit pairs a front and rear sway bar to reduce body roll and improve handling on the 1964-1972 GM A-body. The front bar is manufactured from lightweight hollow-core 4130 chromoly steel, while the rear bar is made from heavy-duty solid-core 1045 cold formed steel for maximum strength. Both bars are CNC-formed for precision fitment and a true bolt-on installation, and a gloss black powder coated finish is applied for lasting durability and corrosion resistance. The kit includes greaseable graphite polyurethane bushings, U-bolts, and high-quality plated hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePosition: Front and rear sway bar kit\u003c\/li\u003e\n\u003cli\u003eFront diameter: 1-1\/4in\u003c\/li\u003e\n\u003cli\u003eRear diameter: 1in\u003c\/li\u003e\n\u003cli\u003eFront material: Hollow-core 4130 chromoly steel\u003c\/li\u003e\n\u003cli\u003eRear material: Solid-core 1045 cold formed steel\u003c\/li\u003e\n\u003cli\u003eFinish: Gloss black powder coat\u003c\/li\u003e\n\u003cli\u003eIncludes: Greaseable graphite polyurethane bushings, U-bolts, and plated hardware\u003c\/li\u003e\n\u003cli\u003eInstallation: Bolt-on\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003ePart number: 52873\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1965 Buick Gran Sport\u003c\/li\u003e\n\u003cli\u003e1966 Buick Gran Sport\u003c\/li\u003e\n\u003cli\u003e1967 Buick Gran Sport\u003c\/li\u003e\n\u003cli\u003e1964 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1965 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1966 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1967 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1968 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1969 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1970 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1971 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1972 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1964 Buick Special\u003c\/li\u003e\n\u003cli\u003e1965 Buick Special\u003c\/li\u003e\n\u003cli\u003e1966 Buick Special\u003c\/li\u003e\n\u003cli\u003e1967 Buick Special\u003c\/li\u003e\n\u003cli\u003e1968 Buick Special\u003c\/li\u003e\n\u003cli\u003e1969 Buick Special\u003c\/li\u003e\n\u003cli\u003e1964 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1965 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1966 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1967 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1968 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1969 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1970 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1971 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1972 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1964 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1965 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1966 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1967 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1968 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1969 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1970 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1971 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1972 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1970 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1971 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1972 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1971 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1972 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1964 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1965 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1966 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1967 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1968 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1969 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1970 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1971 Oldsmobile 442\u003c\/li\u003e\n\u003cli\u003e1964 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1965 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1966 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1967 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1968 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1969 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1970 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1971 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1972 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1964 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1965 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1966 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1967 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1968 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1969 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1970 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1971 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1972 Oldsmobile Vista Cruiser\u003c\/li\u003e\n\u003cli\u003e1969 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1970 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1971 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1972 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1964 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1965 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1966 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1967 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1968 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1969 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1970 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1971 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1972 Pontiac GTO\u003c\/li\u003e\n\u003cli\u003e1964 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1965 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1966 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1967 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1968 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1969 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1970 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1971 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1972 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1964 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1965 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1966 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1967 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1968 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1969 Pontiac Tempest\u003c\/li\u003e\n\u003cli\u003e1970 Pontiac Tempest\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat does the QA1 52873 sway bar kit include?\u003c\/h5\u003e\u003cp\u003eIt includes a 1-1\/4in front sway bar and a 1in rear sway bar for the 1964-1972 GM A-body, with bushings, U-bolts, and hardware.\u003c\/p\u003e\u003ch5\u003eWhat vehicles does it fit?\u003c\/h5\u003e\u003cp\u003eIt fits 1964-1972 GM A-body models such as the Chevelle, El Camino, GTO, LeMans, Cutlass, and Skylark.\u003c\/p\u003e\u003ch5\u003eIs it a bolt-on installation?\u003c\/h5\u003e\u003cp\u003eYes. Both bars are CNC-formed for precision fitment and a true bolt-on installation.\u003c\/p\u003e\u003ch5\u003eWhat are the bars made from?\u003c\/h5\u003e\u003cp\u003eThe front bar is hollow-core 4130 chromoly steel and the rear bar is solid-core 1045 cold formed steel, both with a gloss black powder coat finish.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What does the QA1 52873 sway bar kit include?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It includes a 1-1\/4in front sway bar and a 1in rear sway bar for the 1964-1972 GM A-body, with bushings, U-bolts, and hardware.\"}},{\"@type\":\"Question\",\"name\":\"What vehicles does it fit?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It fits 1964-1972 GM A-body models such as the Chevelle, El Camino, GTO, LeMans, Cutlass, and Skylark.\"}},{\"@type\":\"Question\",\"name\":\"Is it a bolt-on installation?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Both bars are CNC-formed for precision fitment and a true bolt-on installation.\"}},{\"@type\":\"Question\",\"name\":\"What are the bars made from?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The front bar is hollow-core 4130 chromoly steel and the rear bar is solid-core 1045 cold formed steel, both with a gloss black powder coat finish.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846056026160,"sku":"QAP52873","price":661.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/22ce55de72a2daa781c54d63a7fb4a14L.jpg?v=1739510385"},{"product_id":"qa1-rear-sway-bar-1in-qap52885","title":"QA1 Rear Sway Bar 1in | 1979-2004 Ford Mustang | 52885","description":"\u003cp\u003eQA1's Mustang rear sway bar is manufactured from heavy duty solid-core 1045 cold-formed steel for maximum strength. Precision CNC forming provides a true bolt-on fit, and the bar uses adjustable end links and a gloss black powder coated finish. Greasable graphite polyurethane bushings, U-bolts, and high quality plated hardware are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRear sway bar, 1in diameter\u003c\/li\u003e\n\u003cli\u003eReduces body roll and improves handling\u003c\/li\u003e\n\u003cli\u003eHeavy duty solid-core 1045 cold-formed steel construction\u003c\/li\u003e\n\u003cli\u003ePrecision CNC formed for a true bolt-on fit\u003c\/li\u003e\n\u003cli\u003eAdjustable end links for tuning roll stiffness\u003c\/li\u003e\n\u003cli\u003eGreasable graphite polyurethane bushings\u003c\/li\u003e\n\u003cli\u003eU-bolts and high quality plated hardware\u003c\/li\u003e\n\u003cli\u003eGloss black powder coat finish\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003ePart number: 52885\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1979 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1980 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1981 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1982 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1983 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1984 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1985 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1986 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1987 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1988 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1989 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1990 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1991 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1992 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1993 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1994 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1995 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1996 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1997 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1998 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1999 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2000 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2001 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2002 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2003 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2004 Ford Mustang\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/09e59af1e2fd5afa343cad26cbca71fd.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat is the QA1 52885 rear sway bar made from?\u003c\/h5\u003e\u003cp\u003eIt is made from heavy duty solid-core 1045 cold-formed steel for maximum strength.\u003c\/p\u003e\u003ch5\u003eDoes it include mounting bushings and hardware?\u003c\/h5\u003e\u003cp\u003eYes. Greasable graphite polyurethane bushings, U-bolts, and plated hardware are included.\u003c\/p\u003e\u003ch5\u003eCan the roll stiffness be adjusted?\u003c\/h5\u003e\u003cp\u003eYes. Adjustable end links allow the rear roll stiffness to be fine tuned.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is the QA1 52885 rear sway bar made from?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is made from heavy duty solid-core 1045 cold-formed steel for maximum strength.\"}}, {\"@type\": \"Question\", \"name\": \"Does it include mounting bushings and hardware?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. Greasable graphite polyurethane bushings, U-bolts, and plated hardware are included.\"}}, {\"@type\": \"Question\", \"name\": \"Can the roll stiffness be adjusted?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. Adjustable end links allow the rear roll stiffness to be fine tuned.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846056157232,"sku":"QAP52885","price":257.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/58e217619ef5f31c1a0643a1fb8b3817.jpg?v=1739510387"},{"product_id":"qa1-front-sway-bar-1-3-8in-qap52893","title":"QA1 Front Sway Bar 1-3\/8in | 1973-1979 GM A-Body \u0026 X-Body | 52893","description":"\u003cp\u003eQA1's front sway bar is manufactured from lightweight hollow-core 4130 chromoly steel for high strength at reduced weight. Precision CNC forming provides a true bolt-on fit. A gloss black powder coated finish adds lasting durability and corrosion resistance. Greasable graphite polyurethane bushings and high quality plated hardware are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFront sway bar, 1-3\/8in diameter\u003c\/li\u003e\n\u003cli\u003eReduces body roll and improves handling\u003c\/li\u003e\n\u003cli\u003eLightweight hollow-core 4130 chromoly steel construction\u003c\/li\u003e\n\u003cli\u003ePrecision CNC formed for a true bolt-on fit\u003c\/li\u003e\n\u003cli\u003eAdjustable end links for tuning roll stiffness\u003c\/li\u003e\n\u003cli\u003eGreasable graphite polyurethane bushings\u003c\/li\u003e\n\u003cli\u003eHigh quality plated hardware\u003c\/li\u003e\n\u003cli\u003eGloss black powder coat finish\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003ePart number: 52893\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1975 Buick Apollo\u003c\/li\u003e\n\u003cli\u003e1973 Buick Century\u003c\/li\u003e\n\u003cli\u003e1974 Buick Century\u003c\/li\u003e\n\u003cli\u003e1975 Buick Century\u003c\/li\u003e\n\u003cli\u003e1976 Buick Century\u003c\/li\u003e\n\u003cli\u003e1977 Buick Century\u003c\/li\u003e\n\u003cli\u003e1973 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1974 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1975 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1976 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1977 Buick Regal\u003c\/li\u003e\n\u003cli\u003e1975 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1976 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1977 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1978 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1979 Buick Skylark\u003c\/li\u003e\n\u003cli\u003e1973 Chevrolet Chevelle\u003c\/li\u003e\n\u003cli\u003e1973 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1974 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1975 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1976 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1977 Chevrolet El Camino\u003c\/li\u003e\n\u003cli\u003e1973 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1974 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1975 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1976 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1977 Chevrolet Monte Carlo\u003c\/li\u003e\n\u003cli\u003e1975 Chevrolet Nova\u003c\/li\u003e\n\u003cli\u003e1976 Chevrolet Nova\u003c\/li\u003e\n\u003cli\u003e1977 Chevrolet Nova\u003c\/li\u003e\n\u003cli\u003e1978 Chevrolet Nova\u003c\/li\u003e\n\u003cli\u003e1979 Chevrolet Nova\u003c\/li\u003e\n\u003cli\u003e1973 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1974 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1975 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1976 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1977 GMC Sprint\u003c\/li\u003e\n\u003cli\u003e1973 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1974 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1975 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1976 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1977 Oldsmobile Cutlass\u003c\/li\u003e\n\u003cli\u003e1973 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1974 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1975 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1976 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1977 Oldsmobile Cutlass Supreme\u003c\/li\u003e\n\u003cli\u003e1975 Oldsmobile Omega\u003c\/li\u003e\n\u003cli\u003e1976 Oldsmobile Omega\u003c\/li\u003e\n\u003cli\u003e1977 Oldsmobile Omega\u003c\/li\u003e\n\u003cli\u003e1978 Oldsmobile Omega\u003c\/li\u003e\n\u003cli\u003e1979 Oldsmobile Omega\u003c\/li\u003e\n\u003cli\u003e1973 Pontiac Grand Am\u003c\/li\u003e\n\u003cli\u003e1974 Pontiac Grand Am\u003c\/li\u003e\n\u003cli\u003e1975 Pontiac Grand Am\u003c\/li\u003e\n\u003cli\u003e1973 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1974 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1975 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1976 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1977 Pontiac Grand Prix\u003c\/li\u003e\n\u003cli\u003e1973 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1974 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1975 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1976 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1977 Pontiac LeMans\u003c\/li\u003e\n\u003cli\u003e1977 Pontiac Phoenix\u003c\/li\u003e\n\u003cli\u003e1978 Pontiac Phoenix\u003c\/li\u003e\n\u003cli\u003e1979 Pontiac Phoenix\u003c\/li\u003e\n\u003cli\u003e1975 Pontiac Ventura\u003c\/li\u003e\n\u003cli\u003e1976 Pontiac Ventura\u003c\/li\u003e\n\u003cli\u003e1977 Pontiac Ventura\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/f11f72c49ffaeae510e561870b0b42d0.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat is the QA1 52893 front sway bar made from?\u003c\/h5\u003e\u003cp\u003eIt is made from lightweight hollow-core 4130 chromoly steel for strength with reduced weight.\u003c\/p\u003e\u003ch5\u003eWhat platforms does this bar fit?\u003c\/h5\u003e\u003cp\u003eIt fits a range of 1973-1979 GM A-Body and X-Body models. See the vehicle applications list for the confirmed year, make, and model fitment.\u003c\/p\u003e\u003ch5\u003eIs it a bolt-on installation?\u003c\/h5\u003e\u003cp\u003eYes. The bar is precision CNC formed for a true bolt-on fit and includes greasable polyurethane bushings and plated hardware.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is the QA1 52893 front sway bar made from?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is made from lightweight hollow-core 4130 chromoly steel for strength with reduced weight.\"}}, {\"@type\": \"Question\", \"name\": \"What platforms does this bar fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It fits a range of 1973-1979 GM A-Body and X-Body models. See the vehicle applications list for the confirmed year, make, and model fitment.\"}}, {\"@type\": \"Question\", \"name\": \"Is it a bolt-on installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The bar is precision CNC formed for a true bolt-on fit and includes greasable polyurethane bushings and plated hardware.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846056222768,"sku":"QAP52893","price":373.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/eea9048773ba2118054cb9681359b918L.jpg?v=1739510388"},{"product_id":"qa1-rear-sway-bar-1-1-4in-qap52897","title":"QA1 Rear Sway Bar 1-1\/4in | 1963-1972 Chevrolet C10 | 52897","description":"\u003cp\u003eQA1 offers this rear sway bar to add stability to 1963-1972 Chevrolet C10 trucks. It is precision CNC formed for proper fitment and bolt-on installation and is manufactured from lightweight hollow 4130 chromoly steel for strength and durability. The bar is designed to work only with the QA1 1963-1972 C10 rear suspension system. Greasable polyurethane bushings and high quality plated hardware are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRear sway bar, 1-1\/4in diameter\u003c\/li\u003e\n\u003cli\u003eLightweight hollow 4130 chromoly steel construction\u003c\/li\u003e\n\u003cli\u003ePrecision CNC formed for bolt-on installation\u003c\/li\u003e\n\u003cli\u003eDesigned to work only with the QA1 1963-1972 C10 rear suspension system\u003c\/li\u003e\n\u003cli\u003eGreasable polyurethane bushings\u003c\/li\u003e\n\u003cli\u003eHigh quality plated hardware\u003c\/li\u003e\n\u003cli\u003eDurable black powder coat finish\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003ePart number: 52897\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1963 Chevrolet C10 Pickup\u003c\/li\u003e\n\u003cli\u003e1964 Chevrolet C10 Pickup\u003c\/li\u003e\n\u003cli\u003e1965 Chevrolet C10 Pickup\u003c\/li\u003e\n\u003cli\u003e1966 Chevrolet C10 Pickup\u003c\/li\u003e\n\u003cli\u003e1967 Chevrolet C10 Pickup\u003c\/li\u003e\n\u003cli\u003e1968 Chevrolet C10 Pickup\u003c\/li\u003e\n\u003cli\u003e1969 Chevrolet C10 Pickup\u003c\/li\u003e\n\u003cli\u003e1970 Chevrolet C10 Pickup\u003c\/li\u003e\n\u003cli\u003e1971 Chevrolet C10 Pickup\u003c\/li\u003e\n\u003cli\u003e1972 Chevrolet C10 Pickup\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/337b31cd72012e95b8eb0519a8c4ab42.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat suspension does the QA1 52897 rear sway bar require?\u003c\/h5\u003e\u003cp\u003eIt is designed to work only with the QA1 1963-1972 C10 rear suspension system.\u003c\/p\u003e\u003ch5\u003eWhat is the bar made from?\u003c\/h5\u003e\u003cp\u003eIt is made from lightweight hollow 4130 chromoly steel for strength and durability.\u003c\/p\u003e\u003ch5\u003eIs it a bolt-on installation?\u003c\/h5\u003e\u003cp\u003eYes. The bar is precision CNC formed for a bolt-on fit and includes greasable polyurethane bushings and plated hardware.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What suspension does the QA1 52897 rear sway bar require?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is designed to work only with the QA1 1963-1972 C10 rear suspension system.\"}}, {\"@type\": \"Question\", \"name\": \"What is the bar made from?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is made from lightweight hollow 4130 chromoly steel for strength and durability.\"}}, {\"@type\": \"Question\", \"name\": \"Is it a bolt-on installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The bar is precision CNC formed for a bolt-on fit and includes greasable polyurethane bushings and plated hardware.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846056288304,"sku":"QAP52897","price":504.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/7966dbebb3c16fb22fafd99e6109cdbcL.jpg?v=1739510389"},{"product_id":"qa1-front-coil-over-conversion-kit-engine-mounts-65-79-ford-f-100-qap7740-251","title":"QA1 Front Coil-Over Conversion Kit Engine Mounts | 65-79 Ford F-100 | FE Engines | 7740-251","description":"\u003cp\u003eThese QA1 FE engine mounts are designed for use with QA1 F-100 front suspension systems on 1965-1979 Ford F-100 trucks. They are interchangeable with other QA1 F-100 engine brackets, so the engine family can be changed during an engine swap. For use with QA1 K-members.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: engine mounts for QA1 F-100 front suspension systems\u003c\/li\u003e\n\u003cli\u003eEngine family: FE\u003c\/li\u003e\n\u003cli\u003eFitment: 1965-1979 Ford F-100 (QA1 K-member required)\u003c\/li\u003e\n\u003cli\u003eInterchangeable with other QA1 F-100 engine brackets for engine swaps\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003ePart number: 7740-251\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1965 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1966 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1967 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1968 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1969 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1970 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1971 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1972 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1973 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1974 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1975 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1976 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1977 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1978 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1979 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1975 Ford F-150\u003c\/li\u003e\n\u003cli\u003e1976 Ford F-150\u003c\/li\u003e\n\u003cli\u003e1977 Ford F-150\u003c\/li\u003e\n\u003cli\u003e1978 Ford F-150\u003c\/li\u003e\n\u003cli\u003e1979 Ford F-150\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/894939440bf9db3c0b12e40093cf2975.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat are these QA1 F-100 engine mounts for?\u003c\/h5\u003e\u003cp\u003eThey mount a FE engine to a QA1 F-100 front suspension system on 1965-1979 Ford F-100 trucks.\u003c\/p\u003e\u003ch5\u003eDo these mounts work on their own?\u003c\/h5\u003e\u003cp\u003eNo. They are designed for use with QA1 F-100 front suspension systems and QA1 K-members.\u003c\/p\u003e\u003ch5\u003eCan the engine family be changed later?\u003c\/h5\u003e\u003cp\u003eYes. The mounts are interchangeable with other QA1 F-100 engine brackets, so the engine can be swapped without replacing the suspension.\u003c\/p\u003e\u003ch5\u003eWhere are these engine mounts made?\u003c\/h5\u003e\u003cp\u003eQA1 manufactures these engine mounts in the USA.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What are these QA1 F-100 engine mounts for?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They mount a FE engine to a QA1 F-100 front suspension system on 1965-1979 Ford F-100 trucks.\"}}, {\"@type\": \"Question\", \"name\": \"Do these mounts work on their own?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. They are designed for use with QA1 F-100 front suspension systems and QA1 K-members.\"}}, {\"@type\": \"Question\", \"name\": \"Can the engine family be changed later?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The mounts are interchangeable with other QA1 F-100 engine brackets, so the engine can be swapped without replacing the suspension.\"}}, {\"@type\": \"Question\", \"name\": \"Where are these engine mounts made?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"QA1 manufactures these engine mounts in the USA.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846056419376,"sku":"QAP7740-251","price":117.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/228acc00485284f42c48aaab10801edb.jpg?v=1739510391"},{"product_id":"qa1-front-coil-over-conversion-kit-engine-mounts-65-79-ford-f-100-qap7740-253","title":"QA1 Front Coil-Over Conversion Kit Engine Mounts | 65-79 Ford F-100 | Modular\/Coyote Engines | 7740-253","description":"\u003cp\u003eThese QA1 Modular\/Coyote engine mounts are designed for use with QA1 F-100 front suspension systems on 1965-1979 Ford F-100 trucks. They are interchangeable with other QA1 F-100 engine brackets, so the engine family can be changed during an engine swap. For use with QA1 K-members.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: engine mounts for QA1 F-100 front suspension systems\u003c\/li\u003e\n\u003cli\u003eEngine family: Modular\/Coyote\u003c\/li\u003e\n\u003cli\u003eFitment: 1965-1979 Ford F-100 (QA1 K-member required)\u003c\/li\u003e\n\u003cli\u003eInterchangeable with other QA1 F-100 engine brackets for engine swaps\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003ePart number: 7740-253\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1965 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1966 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1967 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1968 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1969 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1970 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1971 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1972 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1973 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1974 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1975 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1976 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1977 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1978 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1979 Ford F-100\u003c\/li\u003e\n\u003cli\u003e1975 Ford F-150\u003c\/li\u003e\n\u003cli\u003e1976 Ford F-150\u003c\/li\u003e\n\u003cli\u003e1977 Ford F-150\u003c\/li\u003e\n\u003cli\u003e1978 Ford F-150\u003c\/li\u003e\n\u003cli\u003e1979 Ford F-150\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/894939440bf9db3c0b12e40093cf2975.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat are these QA1 F-100 engine mounts for?\u003c\/h5\u003e\u003cp\u003eThey mount a Modular\/Coyote engine to a QA1 F-100 front suspension system on 1965-1979 Ford F-100 trucks.\u003c\/p\u003e\u003ch5\u003eDo these mounts work on their own?\u003c\/h5\u003e\u003cp\u003eNo. They are designed for use with QA1 F-100 front suspension systems and QA1 K-members.\u003c\/p\u003e\u003ch5\u003eCan the engine family be changed later?\u003c\/h5\u003e\u003cp\u003eYes. The mounts are interchangeable with other QA1 F-100 engine brackets, so the engine can be swapped without replacing the suspension.\u003c\/p\u003e\u003ch5\u003eWhere are these engine mounts made?\u003c\/h5\u003e\u003cp\u003eQA1 manufactures these engine mounts in the USA.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What are these QA1 F-100 engine mounts for?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They mount a Modular\/Coyote engine to a QA1 F-100 front suspension system on 1965-1979 Ford F-100 trucks.\"}}, {\"@type\": \"Question\", \"name\": \"Do these mounts work on their own?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. They are designed for use with QA1 F-100 front suspension systems and QA1 K-members.\"}}, {\"@type\": \"Question\", \"name\": \"Can the engine family be changed later?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The mounts are interchangeable with other QA1 F-100 engine brackets, so the engine can be swapped without replacing the suspension.\"}}, {\"@type\": \"Question\", \"name\": \"Where are these engine mounts made?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"QA1 manufactures these engine mounts in the USA.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846056550448,"sku":"QAP7740-253","price":117.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/42fd556c62bec2c4e7f030fcb27b842d.jpg?v=1739510393"},{"product_id":"qa1-thrust-bearing-kit-washers-2-1-2in-2-shocks-qap7888-109","title":"QA1 Thrust Bearing Kit w\/ Washers, 2-1\/2\" for 2 Shocks | 7888-109","description":"\u003cp\u003eQA1's thrust bearing kit is used with all coil-over shocks and includes washers for two shocks. It makes ride height adjustment easier and eliminates suspension bind, and is sized for 2-1\/2 inch ID springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: thrust bearing kit with washers\u003c\/li\u003e\n\u003cli\u003eQuantity: covers 2 shocks\u003c\/li\u003e\n\u003cli\u003eSpring size: 2-1\/2 in ID\u003c\/li\u003e\n\u003cli\u003eApplication: all coil-over shocks\u003c\/li\u003e\n\u003cli\u003eBenefit: easier ride height adjustment, eliminates suspension bind\u003c\/li\u003e\n\u003cli\u003ePart number: 7888-109\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat does the QA1 7888-109 thrust bearing kit do?\u003c\/h5\u003e\u003cp\u003eIt makes ride height adjustment easier and eliminates suspension bind on coil-over shocks.\u003c\/p\u003e\u003ch5\u003eHow many shocks does the 7888-109 kit cover?\u003c\/h5\u003e\u003cp\u003eIt includes washers for two shocks.\u003c\/p\u003e\u003ch5\u003eWhat spring size does the 7888-109 fit?\u003c\/h5\u003e\u003cp\u003eIt is sized for 2-1\/2 inch ID springs.\u003c\/p\u003e\u003ch5\u003eWhich shocks use the 7888-109 kit?\u003c\/h5\u003e\u003cp\u003eIt is used with all QA1 coil-over shocks.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does the QA1 7888-109 thrust bearing kit do?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It makes ride height adjustment easier and eliminates suspension bind on coil-over shocks.\"}}, {\"@type\": \"Question\", \"name\": \"How many shocks does the 7888-109 kit cover?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It includes washers for two shocks.\"}}, {\"@type\": \"Question\", \"name\": \"What spring size does the 7888-109 fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is sized for 2-1\/2 inch ID springs.\"}}, {\"@type\": \"Question\", \"name\": \"Which shocks use the 7888-109 kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is used with all QA1 coil-over shocks.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846056812592,"sku":"QAP7888-109","price":42.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/7592150ce2d69deba29ad3f6fc2ea039.jpg?v=1739510396"},{"product_id":"qa1-spanner-wrench-thrust-bearing-kit-qap7888-110","title":"QA1 Spanner Wrench \u0026 Thrust Bearing Kit | 2 Pack for 2-1\/2in ID Springs | 7888-110","description":"\u003cp\u003eQA1 offers spanner wrenches and thrust bearing kits individually and as a complete kit. Part number 7888-110 is used for all adjustable QA1 shocks and economy GM Pro Coil systems. The kit makes ride height adjustment easier and the thrust bearings help eliminate suspension bind. It is designed for 2-1\/2in ID springs and comes as a 2 pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: spanner wrench and thrust bearing kit\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 pack\u003c\/li\u003e\n\u003cli\u003eSpring fitment: 2-1\/2in ID springs\u003c\/li\u003e\n\u003cli\u003eApplication: all adjustable QA1 shocks and economy GM Pro Coil systems\u003c\/li\u003e\n\u003cli\u003eBenefit: easier ride height adjustment and reduced suspension bind\u003c\/li\u003e\n\u003cli\u003ePart number: 7888-110\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat is the QA1 7888-110 kit used for?\u003c\/h5\u003e\u003cp\u003eIt is used for all adjustable QA1 shocks and economy GM Pro Coil systems to make ride height adjustment easier.\u003c\/p\u003e\u003ch5\u003eWhat spring size does it fit?\u003c\/h5\u003e\u003cp\u003eIt is designed for 2-1\/2in ID springs.\u003c\/p\u003e\u003ch5\u003eHow many pieces are included?\u003c\/h5\u003e\u003cp\u003eIt comes as a 2 pack.\u003c\/p\u003e\u003ch5\u003eDo the thrust bearings serve a purpose?\u003c\/h5\u003e\u003cp\u003eYes. The thrust bearings help eliminate suspension bind during adjustment.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is the QA1 7888-110 kit used for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is used for all adjustable QA1 shocks and economy GM Pro Coil systems to make ride height adjustment easier.\"}},{\"@type\":\"Question\",\"name\":\"What spring size does it fit?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is designed for 2-1\/2in ID springs.\"}},{\"@type\":\"Question\",\"name\":\"How many pieces are included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It comes as a 2 pack.\"}},{\"@type\":\"Question\",\"name\":\"Do the thrust bearings serve a purpose?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. The thrust bearings help eliminate suspension bind during adjustment.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846056878128,"sku":"QAP7888-110","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/99e2fff4e4091ce6566f51e3db8b17f0L.jpg?v=1739510397"},{"product_id":"qa1-high-travel-coil-over-spring-qap9ht250","title":"QA1 High Travel Coil-Over Spring | 2-1\/2in ID, 9in, 250 lbs\/in, Silver Powder Coated | 9HT250","description":"\u003cp\u003eQA1 high travel coil-over springs are wound from specially designed high-tensile chrome silicon alloy spring wire, which allows fewer coils and a smaller wire diameter. The result is a lighter spring with increased travel from the larger gap between coils, reducing unsprung weight and reacting faster for improved suspension response. Careful heat-treating and post-processing extend fatigue life, and the coil design lets the spring compress to coil-bind without affecting spring rate or free height. This spring is ground at both ends for straight, consistent operation, finished in silver powder coat, and made in the USA. All QA1 springs carry a lifetime guarantee to remain within 2% of the original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: high travel coil-over spring\u003c\/li\u003e\n\u003cli\u003eInside diameter: 2-1\/2in (2.5in)\u003c\/li\u003e\n\u003cli\u003eFree length: 9in\u003c\/li\u003e\n\u003cli\u003eSpring rate: 250 lbs\/in\u003c\/li\u003e\n\u003cli\u003eMaterial: chrome silicon alloy spring wire\u003c\/li\u003e\n\u003cli\u003eFinish: silver powder coated\u003c\/li\u003e\n\u003cli\u003eEnds: ground square both ends\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee within 2% of original free height and rate\u003c\/li\u003e\n\u003cli\u003ePart number: 9HT250\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat is the inside diameter of this QA1 high travel spring?\u003c\/h5\u003e\u003cp\u003eThis spring has a 2-1\/2in (2.5in) inside diameter, sized for QA1 coil-over shocks and other coil-over systems that use standard 2.5in ID springs.\u003c\/p\u003e\u003ch5\u003eWhat are this spring's free length and rate?\u003c\/h5\u003e\u003cp\u003eIt has a 9in free length and a 250 lbs\/in spring rate.\u003c\/p\u003e\u003ch5\u003eWhat makes QA1 high travel springs lighter than standard springs?\u003c\/h5\u003e\u003cp\u003eThey are wound from high-tensile chrome silicon alloy spring wire, which uses fewer coils and a smaller wire diameter to cut weight and increase travel while reducing unsprung mass.\u003c\/p\u003e\u003ch5\u003eAre QA1 springs guaranteed?\u003c\/h5\u003e\u003cp\u003eYes. QA1 springs are lifetime guaranteed to remain within 2% of their original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is the inside diameter of this QA1 high travel spring?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This spring has a 2-1\/2in (2.5in) inside diameter, sized for QA1 coil-over shocks and other coil-over systems that use standard 2.5in ID springs.\"}}, {\"@type\": \"Question\", \"name\": \"What are this spring's free length and rate?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It has a 9in free length and a 250 lbs\/in spring rate.\"}}, {\"@type\": \"Question\", \"name\": \"What makes QA1 high travel springs lighter than standard springs?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are wound from high-tensile chrome silicon alloy spring wire, which uses fewer coils and a smaller wire diameter to cut weight and increase travel while reducing unsprung mass.\"}}, {\"@type\": \"Question\", \"name\": \"Are QA1 springs guaranteed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. QA1 springs are lifetime guaranteed to remain within 2% of their original free height and rate under normal operating conditions.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846056943664,"sku":"QAP9HT250","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/5a7b885e62ff0413b31009445d2fa1ceL.jpg?v=1739510398"},{"product_id":"qa1-2-1-2in-id-high-travel-spring-9in-qap9ht400b","title":"QA1 2-1\/2in ID High Travel Spring | 9in Length, 400 lbs\/in, Black Powder Coat | 9HT400B","description":"\u003cp\u003eQA1 high travel coil-over springs use a specially designed high-tensile chrome silicon alloy spring wire that allows fewer coils and a smaller wire diameter. The result is a lighter spring with increased travel from the larger distance between coils, which reduces unsprung weight and lets the suspension react faster. Heat treating and post-processing extend spring life, and the coil design can be compressed to coil-bind without affecting rate or free height. Each spring is ground at both ends and marked with its free length and rate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: high travel coil-over spring\u003c\/li\u003e\n\u003cli\u003eInside diameter: 2-1\/2in\u003c\/li\u003e\n\u003cli\u003eFree length: 9in\u003c\/li\u003e\n\u003cli\u003eSpring rate: 400 lbs\/in\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coat\u003c\/li\u003e\n\u003cli\u003eMaterial: high-tensile chrome silicon alloy spring wire\u003c\/li\u003e\n\u003cli\u003eConstruction: cold wound, heat treated, shot peened\u003c\/li\u003e\n\u003cli\u003eEnds: squared and ground for straight, consistent seating\u003c\/li\u003e\n\u003cli\u003eLength and spring rate marked on each spring\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee to stay within 2% of original free height and rate under normal use\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003cli\u003ePart number: 9HT400B\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat is the inside diameter of this spring?\u003c\/h5\u003e\u003cp\u003eThis high travel spring has a 2-1\/2in inside diameter, which fits QA1 and other 2-1\/2in coil-over shock bodies.\u003c\/p\u003e\u003ch5\u003eWhat length and spring rate is this spring?\u003c\/h5\u003e\u003cp\u003eIt is a 9in free length spring rated at the pounds-per-inch value shown in the title and specifications.\u003c\/p\u003e\u003ch5\u003eIs this spring sold individually or in pairs?\u003c\/h5\u003e\u003cp\u003eQA1 high travel springs are sold individually, so order the quantity needed for the application.\u003c\/p\u003e\u003ch5\u003eAre QA1 high travel springs covered by a warranty?\u003c\/h5\u003e\u003cp\u003eYes. QA1 guarantees its springs for life to remain within 2% of their original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is the inside diameter of this spring?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This high travel spring has a 2-1\/2in inside diameter, which fits QA1 and other 2-1\/2in coil-over shock bodies.\"}}, {\"@type\": \"Question\", \"name\": \"What length and spring rate is this spring?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is a 9in free length spring rated at the pounds-per-inch value shown in the title and specifications.\"}}, {\"@type\": \"Question\", \"name\": \"Is this spring sold individually or in pairs?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"QA1 high travel springs are sold individually, so order the quantity needed for the application.\"}}, {\"@type\": \"Question\", \"name\": \"Are QA1 high travel springs covered by a warranty?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. QA1 guarantees its springs for life to remain within 2% of their original free height and rate under normal operating conditions.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846058156080,"sku":"QAP9HT400B","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/da5673a8836dcec5b6d5882a72543386L_4dca8767-52f6-4dd6-a7da-f9cd2ac5f47f.jpg?v=1739510401"},{"product_id":"qa1-2-1-2in-id-high-travel-spring-9in-qap9ht450b","title":"QA1 2-1\/2in ID High Travel Spring | 9in Length, 450 lbs\/in, Black Powder Coat | 9HT450B","description":"\u003cp\u003eQA1 high travel coil-over springs use a specially designed high-tensile chrome silicon alloy spring wire that allows fewer coils and a smaller wire diameter. The result is a lighter spring with increased travel from the larger distance between coils, which reduces unsprung weight and lets the suspension react faster. Heat treating and post-processing extend spring life, and the coil design can be compressed to coil-bind without affecting rate or free height. Each spring is ground at both ends and marked with its free length and rate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: high travel coil-over spring\u003c\/li\u003e\n\u003cli\u003eInside diameter: 2-1\/2in\u003c\/li\u003e\n\u003cli\u003eFree length: 9in\u003c\/li\u003e\n\u003cli\u003eSpring rate: 450 lbs\/in\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coat\u003c\/li\u003e\n\u003cli\u003eMaterial: high-tensile chrome silicon alloy spring wire\u003c\/li\u003e\n\u003cli\u003eConstruction: cold wound, heat treated, shot peened\u003c\/li\u003e\n\u003cli\u003eEnds: squared and ground for straight, consistent seating\u003c\/li\u003e\n\u003cli\u003eLength and spring rate marked on each spring\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee to stay within 2% of original free height and rate under normal use\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003cli\u003ePart number: 9HT450B\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat is the inside diameter of this spring?\u003c\/h5\u003e\u003cp\u003eThis high travel spring has a 2-1\/2in inside diameter, which fits QA1 and other 2-1\/2in coil-over shock bodies.\u003c\/p\u003e\u003ch5\u003eWhat length and spring rate is this spring?\u003c\/h5\u003e\u003cp\u003eIt is a 9in free length spring rated at the pounds-per-inch value shown in the title and specifications.\u003c\/p\u003e\u003ch5\u003eIs this spring sold individually or in pairs?\u003c\/h5\u003e\u003cp\u003eQA1 high travel springs are sold individually, so order the quantity needed for the application.\u003c\/p\u003e\u003ch5\u003eAre QA1 high travel springs covered by a warranty?\u003c\/h5\u003e\u003cp\u003eYes. QA1 guarantees its springs for life to remain within 2% of their original free height and rate under normal operating conditions.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is the inside diameter of this spring?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This high travel spring has a 2-1\/2in inside diameter, which fits QA1 and other 2-1\/2in coil-over shock bodies.\"}}, {\"@type\": \"Question\", \"name\": \"What length and spring rate is this spring?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is a 9in free length spring rated at the pounds-per-inch value shown in the title and specifications.\"}}, {\"@type\": \"Question\", \"name\": \"Is this spring sold individually or in pairs?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"QA1 high travel springs are sold individually, so order the quantity needed for the application.\"}}, {\"@type\": \"Question\", \"name\": \"Are QA1 high travel springs covered by a warranty?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. QA1 guarantees its springs for life to remain within 2% of their original free height and rate under normal operating conditions.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846059008048,"sku":"QAP9HT450B","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/da5673a8836dcec5b6d5882a72543386L_b75ae21f-7789-4fc2-a9d6-ce670be13958.jpg?v=1739510403"},{"product_id":"qa1-bump-steer-kit-qapbax102","title":"QA1 Bump Steer Kit | 1979-1993 Ford Mustang | BAX102","description":"\u003cp\u003eChanging suspension components sometimes leads to bump steer or unwanted toe change during suspension travel. The QA1 bump steer kit corrects this problem and is easy to install. The kit features QA1's premium chromoly steel, heat treated, self-sealing and self-lubricating X-series rod ends along with anodized aluminum adjusting sleeves. Each kit includes two QA1 X-series rod ends with jam nuts, two anodized aluminum adjusting sleeves with jam nuts, two specially designed spindle studs with washer and lock nut, and an assortment of bump steer spacers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Bump steer correction kit\u003c\/li\u003e\n\u003cli\u003eRod ends: QA1 chromoly steel X-series, heat treated, self-sealing, self-lubricating\u003c\/li\u003e\n\u003cli\u003eSleeves: Anodized aluminum adjusting sleeves with jam nuts\u003c\/li\u003e\n\u003cli\u003eIncludes: 2 rod ends, 2 sleeves, 2 spindle studs with washer and lock nut, bump steer spacers\u003c\/li\u003e\n\u003cli\u003eFunction: Corrects bump steer and toe change after suspension changes\u003c\/li\u003e\n\u003cli\u003ePart number: BAX102\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1979 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1980 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1981 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1982 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1983 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1984 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1985 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1986 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1987 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1988 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1989 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1990 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1991 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1992 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1993 Ford Mustang\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/a0e4e3a7a8ff7c766567f86cb252fe9b.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat does a bump steer kit do?\u003c\/h5\u003e\u003cp\u003eIt corrects bump steer and unwanted toe change that can occur during suspension travel after suspension components are changed.\u003c\/p\u003e\u003ch5\u003eWhat is included in the kit?\u003c\/h5\u003e\u003cp\u003eIt includes two QA1 X-series rod ends with jam nuts, two anodized aluminum adjusting sleeves with jam nuts, two spindle studs with washer and lock nut, and an assortment of bump steer spacers.\u003c\/p\u003e\u003ch5\u003eWhat are the rod ends made of?\u003c\/h5\u003e\u003cp\u003eThe kit uses QA1 chromoly steel X-series rod ends that are heat treated, self-sealing, and self-lubricating.\u003c\/p\u003e\u003ch5\u003eWhat vehicles does this kit fit?\u003c\/h5\u003e\u003cp\u003eIt fits 1979-1993 Ford Mustang models as listed in the vehicle applications.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does a bump steer kit do?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It corrects bump steer and unwanted toe change that can occur during suspension travel after suspension components are changed.\"}}, {\"@type\": \"Question\", \"name\": \"What is included in the kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It includes two QA1 X-series rod ends with jam nuts, two anodized aluminum adjusting sleeves with jam nuts, two spindle studs with washer and lock nut, and an assortment of bump steer spacers.\"}}, {\"@type\": \"Question\", \"name\": \"What are the rod ends made of?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The kit uses QA1 chromoly steel X-series rod ends that are heat treated, self-sealing, and self-lubricating.\"}}, {\"@type\": \"Question\", \"name\": \"What vehicles does this kit fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It fits 1979-1993 Ford Mustang models as listed in the vehicle applications.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846062088240,"sku":"QAPBAX102","price":214.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/d6e4c935cc145a4cc8511ce4a4819751.jpg?v=1739510407"},{"product_id":"qa1-bump-steer-kit-qapbax104","title":"QA1 Bump Steer Kit | 1994-2004 Ford Mustang | BAX104","description":"\u003cp\u003eChanging suspension components sometimes leads to bump steer or unwanted toe change during suspension travel. The QA1 bump steer kit corrects this problem and is easy to install. The kit features QA1's premium chromoly steel, heat treated, self-sealing and self-lubricating X-series rod ends along with anodized aluminum adjusting sleeves. Each kit includes two QA1 X-series rod ends with jam nuts, two anodized aluminum adjusting sleeves with jam nuts, two specially designed spindle studs with washer and lock nut, and an assortment of bump steer spacers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Bump steer correction kit\u003c\/li\u003e\n\u003cli\u003eRod ends: QA1 chromoly steel X-series, heat treated, self-sealing, self-lubricating\u003c\/li\u003e\n\u003cli\u003eSleeves: Anodized aluminum adjusting sleeves with jam nuts\u003c\/li\u003e\n\u003cli\u003eIncludes: 2 rod ends, 2 sleeves, 2 spindle studs with washer and lock nut, bump steer spacers\u003c\/li\u003e\n\u003cli\u003eFunction: Corrects bump steer and toe change after suspension changes\u003c\/li\u003e\n\u003cli\u003ePart number: BAX104\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVehicle Applications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1994 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1995 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1996 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1997 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1998 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e1999 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2000 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2001 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2002 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2003 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2004 Ford Mustang\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/a0e4e3a7a8ff7c766567f86cb252fe9b.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat does a bump steer kit do?\u003c\/h5\u003e\u003cp\u003eIt corrects bump steer and unwanted toe change that can occur during suspension travel after suspension components are changed.\u003c\/p\u003e\u003ch5\u003eWhat is included in the kit?\u003c\/h5\u003e\u003cp\u003eIt includes two QA1 X-series rod ends with jam nuts, two anodized aluminum adjusting sleeves with jam nuts, two spindle studs with washer and lock nut, and an assortment of bump steer spacers.\u003c\/p\u003e\u003ch5\u003eWhat are the rod ends made of?\u003c\/h5\u003e\u003cp\u003eThe kit uses QA1 chromoly steel X-series rod ends that are heat treated, self-sealing, and self-lubricating.\u003c\/p\u003e\u003ch5\u003eWhat vehicles does this kit fit?\u003c\/h5\u003e\u003cp\u003eIt fits 1994-2004 Ford Mustang models as listed in the vehicle applications.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does a bump steer kit do?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It corrects bump steer and unwanted toe change that can occur during suspension travel after suspension components are changed.\"}}, {\"@type\": \"Question\", \"name\": \"What is included in the kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It includes two QA1 X-series rod ends with jam nuts, two anodized aluminum adjusting sleeves with jam nuts, two spindle studs with washer and lock nut, and an assortment of bump steer spacers.\"}}, {\"@type\": \"Question\", \"name\": \"What are the rod ends made of?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The kit uses QA1 chromoly steel X-series rod ends that are heat treated, self-sealing, and self-lubricating.\"}}, {\"@type\": \"Question\", \"name\": \"What vehicles does this kit fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It fits 1994-2004 Ford Mustang models as listed in the vehicle applications.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846063104048,"sku":"QAPBAX104","price":214.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/d6e4c935cc145a4cc8511ce4a4819751_7a34bbc2-5454-476d-b7e3-7a8bfafea742.jpg?v=1739510408"},{"product_id":"qa1-c-series-2-pc-female-rod-end-qapcfr4","title":"QA1 C-Series 2-Pc Female Rod End | 1\/4-28 RH x .25in Bore Carbon Steel | CFR4","description":"\u003cp\u003eThis QA1 C-Series rod end is a self-lubricating version of a traditional two-piece female carbon steel rod end, featuring a PTFE liner. It is protective coated for corrosion resistance and is offered in inch dimensions with left and right hand threads. This rod end has a right hand thread, a .25in bore, and a 1\/4-28 thread size. The ball is made from 52100 bearing steel that is heat treated, hard chrome plated, and precision ground, while the body is carbon steel, protective coated for corrosion resistance, and PTFE lined. Stud configurations are available by contacting QA1 at 800-721-7761.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: 2-piece female rod end (C-Series, CF-T carbon steel)\u003c\/li\u003e\n\u003cli\u003eThread hand: Right hand\u003c\/li\u003e\n\u003cli\u003eBore: .25in\u003c\/li\u003e\n\u003cli\u003eThread size: 1\/4-28\u003c\/li\u003e\n\u003cli\u003eLiner: PTFE, self-lubricating\u003c\/li\u003e\n\u003cli\u003eBall: 52100 bearing steel, heat treated, hard chrome plated, precision ground\u003c\/li\u003e\n\u003cli\u003eBody: Carbon steel, protective coated for corrosion resistance\u003c\/li\u003e\n\u003cli\u003ePart number: CFR4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eIs the QA1 CFR4 rod end self-lubricating?\u003c\/h5\u003e\u003cp\u003eYes. It uses a PTFE liner for self-lubricating, low-maintenance operation.\u003c\/p\u003e\u003ch5\u003eWhat are the bore and thread sizes?\u003c\/h5\u003e\u003cp\u003eIt has a .25in bore and a 1\/4-28 right hand thread.\u003c\/p\u003e\u003ch5\u003eWhat is the ball made from?\u003c\/h5\u003e\u003cp\u003eThe ball is 52100 bearing steel that is heat treated, hard chrome plated, and precision ground.\u003c\/p\u003e\u003ch5\u003eAre other thread or stud versions available?\u003c\/h5\u003e\u003cp\u003eIt is offered with left and right hand threads, and stud configurations are available by contacting QA1 at 800-721-7761.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is the QA1 CFR4 rod end self-lubricating?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. It uses a PTFE liner for self-lubricating, low-maintenance operation.\"}},{\"@type\":\"Question\",\"name\":\"What are the bore and thread sizes?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It has a .25in bore and a 1\/4-28 right hand thread.\"}},{\"@type\":\"Question\",\"name\":\"What is the ball made from?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The ball is 52100 bearing steel that is heat treated, hard chrome plated, and precision ground.\"}},{\"@type\":\"Question\",\"name\":\"Are other thread or stud versions available?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is offered with left and right hand threads, and stud configurations are available by contacting QA1 at 800-721-7761.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846063824944,"sku":"QAPCFR4","price":4.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/1ca653563042a13620108a65952014a3L_620c5038-04a6-44f9-8320-2613ee761752.jpg?v=1739510418"},{"product_id":"qa1-c-series-2-pc-rod-end-qapcfr5","title":"QA1 C Series 2-Pc Rod End | Female Right-Hand .3125in Bore x 5\/16-24 Carbon Steel | CFR5","description":"\u003cp\u003eThe QA1 C Series 2-piece rod end is a carbon steel female rod end with a right-hand 5\/16-24 thread and a .3125in bore. The ball is 52100 bearing steel that is heat treated, hard chrome plated, and precision ground for smooth, consistent movement. The carbon steel body is protective coated for corrosion resistance. It is built to precise tolerances for motorsport, chassis, and linkage use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: C Series 2-piece female rod end\u003c\/li\u003e\n\u003cli\u003eThread: right-hand 5\/16-24\u003c\/li\u003e\n\u003cli\u003eBore diameter: .3125 in\u003c\/li\u003e\n\u003cli\u003eBall: 52100 bearing steel, heat treated, hard chrome plated, precision ground\u003c\/li\u003e\n\u003cli\u003eBody: carbon steel, protective coated for corrosion resistance\u003c\/li\u003e\n\u003cli\u003ePart number: CFR5\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat are the bore and thread sizes of the QA1 CFR5 rod end?\u003c\/h5\u003e\u003cp\u003eIt has a .3125in bore and a 5\/16-24 right-hand thread.\u003c\/p\u003e\u003ch5\u003eIs the QA1 CFR5 a male or female rod end?\u003c\/h5\u003e\u003cp\u003eIt is a female rod end with a right-hand thread.\u003c\/p\u003e\u003ch5\u003eWhat is the QA1 CFR5 rod end made of?\u003c\/h5\u003e\u003cp\u003eThe ball is 52100 bearing steel that is heat treated, hard chrome plated, and precision ground, and the body is carbon steel with a protective coating for corrosion resistance.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What are the bore and thread sizes of the QA1 CFR5 rod end?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It has a .3125in bore and a 5\/16-24 right-hand thread.\"}},{\"@type\":\"Question\",\"name\":\"Is the QA1 CFR5 a male or female rod end?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is a female rod end with a right-hand thread.\"}},{\"@type\":\"Question\",\"name\":\"What is the QA1 CFR5 rod end made of?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The ball is 52100 bearing steel that is heat treated, hard chrome plated, and precision ground, and the body is carbon steel with a protective coating for corrosion resistance.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846063890480,"sku":"QAPCFR5","price":4.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/1ca653563042a13620108a65952014a3L_66a0d96f-b624-4d3f-ab74-95c107ccc410.jpg?v=1739510419"},{"product_id":"qa1-c-series-2-pc-rod-end-qapcfr6","title":"QA1 C Series 2-Pc Rod End | Female Right-Hand .375in Bore x 3\/8-24 Carbon Steel | CFR6","description":"\u003cp\u003eThe QA1 C Series 2-piece rod end is a carbon steel female rod end with a right-hand 3\/8-24 thread and a .375in bore. The ball is 52100 bearing steel that is heat treated, hard chrome plated, and precision ground for smooth, consistent movement. The carbon steel body is protective coated for corrosion resistance. It is built to precise tolerances for motorsport, chassis, and linkage use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: C Series 2-piece female rod end\u003c\/li\u003e\n\u003cli\u003eThread: right-hand 3\/8-24\u003c\/li\u003e\n\u003cli\u003eBore diameter: .375 in\u003c\/li\u003e\n\u003cli\u003eBall: 52100 bearing steel, heat treated, hard chrome plated, precision ground\u003c\/li\u003e\n\u003cli\u003eBody: carbon steel, protective coated for corrosion resistance\u003c\/li\u003e\n\u003cli\u003ePart number: CFR6\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat are the bore and thread sizes of the QA1 CFR6 rod end?\u003c\/h5\u003e\u003cp\u003eIt has a .375in bore and a 3\/8-24 right-hand thread.\u003c\/p\u003e\u003ch5\u003eIs the QA1 CFR6 a male or female rod end?\u003c\/h5\u003e\u003cp\u003eIt is a female rod end with a right-hand thread.\u003c\/p\u003e\u003ch5\u003eWhat is the QA1 CFR6 rod end made of?\u003c\/h5\u003e\u003cp\u003eThe ball is 52100 bearing steel that is heat treated, hard chrome plated, and precision ground, and the body is carbon steel with a protective coating for corrosion resistance.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What are the bore and thread sizes of the QA1 CFR6 rod end?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It has a .375in bore and a 3\/8-24 right-hand thread.\"}},{\"@type\":\"Question\",\"name\":\"Is the QA1 CFR6 a male or female rod end?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is a female rod end with a right-hand thread.\"}},{\"@type\":\"Question\",\"name\":\"What is the QA1 CFR6 rod end made of?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The ball is 52100 bearing steel that is heat treated, hard chrome plated, and precision ground, and the body is carbon steel with a protective coating for corrosion resistance.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846063988784,"sku":"QAPCFR6","price":5.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/1ca653563042a13620108a65952014a3L_bb63088b-6dcb-4497-b141-31bdee89349b.jpg?v=1739510420"},{"product_id":"qa1-c-series-2-pc-rod-end-qapcfr8","title":"QA1 C Series 2-Pc Rod End | Female Right-Hand .5in Bore x 1\/2-20 Carbon Steel | CFR8","description":"\u003cp\u003eThe QA1 C Series 2-piece rod end is a carbon steel female rod end with a right-hand 1\/2-20 thread and a .5in bore. The ball is 52100 bearing steel that is heat treated, hard chrome plated, and precision ground for smooth, consistent movement. The carbon steel body is protective coated for corrosion resistance. It is built to precise tolerances for motorsport, chassis, and linkage use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: C Series 2-piece female rod end\u003c\/li\u003e\n\u003cli\u003eThread: right-hand 1\/2-20\u003c\/li\u003e\n\u003cli\u003eBore diameter: .5 in\u003c\/li\u003e\n\u003cli\u003eBall: 52100 bearing steel, heat treated, hard chrome plated, precision ground\u003c\/li\u003e\n\u003cli\u003eBody: carbon steel, protective coated for corrosion resistance\u003c\/li\u003e\n\u003cli\u003ePart number: CFR8\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat are the bore and thread sizes of the QA1 CFR8 rod end?\u003c\/h5\u003e\u003cp\u003eIt has a .5in bore and a 1\/2-20 right-hand thread.\u003c\/p\u003e\u003ch5\u003eIs the QA1 CFR8 a male or female rod end?\u003c\/h5\u003e\u003cp\u003eIt is a female rod end with a right-hand thread.\u003c\/p\u003e\u003ch5\u003eWhat is the QA1 CFR8 rod end made of?\u003c\/h5\u003e\u003cp\u003eThe ball is 52100 bearing steel that is heat treated, hard chrome plated, and precision ground, and the body is carbon steel with a protective coating for corrosion resistance.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What are the bore and thread sizes of the QA1 CFR8 rod end?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It has a .5in bore and a 1\/2-20 right-hand thread.\"}},{\"@type\":\"Question\",\"name\":\"Is the QA1 CFR8 a male or female rod end?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is a female rod end with a right-hand thread.\"}},{\"@type\":\"Question\",\"name\":\"What is the QA1 CFR8 rod end made of?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The ball is 52100 bearing steel that is heat treated, hard chrome plated, and precision ground, and the body is carbon steel with a protective coating for corrosion resistance.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846064021552,"sku":"QAPCFR8","price":7.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/1ca653563042a13620108a65952014a3L_25437435-be81-4e56-b74a-3b86b01ea1b9.jpg?v=1739510421"},{"product_id":"qa1-c-series-2-pc-rod-end-qapcml3","title":"QA1 C Series 2-Pc Rod End | Male Left-Hand .19in Bore x 3\/16-24 Carbon Steel | CML3","description":"\u003cp\u003eThe QA1 C Series 2-piece rod end is a carbon steel male rod end with a left-hand 3\/16-24 thread and a .19in bore. The ball is 52100 bearing steel that is heat treated, hard chrome plated, and precision ground for smooth, consistent movement. The carbon steel body is protective coated for corrosion resistance. It is built to precise tolerances for motorsport, chassis, and linkage use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: C Series 2-piece male rod end\u003c\/li\u003e\n\u003cli\u003eThread: left-hand 3\/16-24\u003c\/li\u003e\n\u003cli\u003eBore diameter: .19 in\u003c\/li\u003e\n\u003cli\u003eBall: 52100 bearing steel, heat treated, hard chrome plated, precision ground\u003c\/li\u003e\n\u003cli\u003eBody: carbon steel, protective coated for corrosion resistance\u003c\/li\u003e\n\u003cli\u003ePart number: CML3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch5\u003eWhat are the bore and thread sizes of the QA1 CML3 rod end?\u003c\/h5\u003e\u003cp\u003eIt has a .19in bore and a 3\/16-24 left-hand thread.\u003c\/p\u003e\u003ch5\u003eIs the QA1 CML3 a male or female rod end?\u003c\/h5\u003e\u003cp\u003eIt is a male rod end with a left-hand thread.\u003c\/p\u003e\u003ch5\u003eWhat is the QA1 CML3 rod end made of?\u003c\/h5\u003e\u003cp\u003eThe ball is 52100 bearing steel that is heat treated, hard chrome plated, and precision ground, and the body is carbon steel with a protective coating for corrosion resistance.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What are the bore and thread sizes of the QA1 CML3 rod end?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It has a .19in bore and a 3\/16-24 left-hand thread.\"}},{\"@type\":\"Question\",\"name\":\"Is the QA1 CML3 a male or female rod end?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is a male rod end with a left-hand thread.\"}},{\"@type\":\"Question\",\"name\":\"What is the QA1 CML3 rod end made of?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The ball is 52100 bearing steel that is heat treated, hard chrome plated, and precision ground, and the body is carbon steel with a protective coating for corrosion resistance.\"}}]}\u003c\/script\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":41846064218160,"sku":"QAPCML3","price":4.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0586\/9548\/3440\/files\/4f5386983270eb5391e71ed6271c9e87L_fe869d67-1daf-42c4-9a1a-3b0a8bfaecf0.jpg?v=1739510424"}],"url":"https:\/\/berryperformancesales.com\/collections\/qa1.oembed?page=39","provider":"Berry Performance Sales","version":"1.0","type":"link"}